When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- 바이러스 또는 맬웨어 공격.
- 오래된 운영 체제.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe 아이콘.
2. If the status is set to 연결되지 않은은 클릭 Network globe icon, choose your Wi-Fi network and click on 연결하기 button. Make sure 비행기 모드 켜져 있지 않습니다.
3. If you again face the same network connection error code, then click on the 분리 button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi 인터넷 network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. 마우스 오른쪽 버튼으로 Wi-Fi 아이콘 선택 네트워크 및 인터넷 설정을 엽니 다.
6. 을 클릭 Wi-Fi 인터넷.
7. Scroll down the right menu, click on 알려진 네트워크 관리.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select 잊다.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
방법 2: 라우터 다시 시작
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
참고 : If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. 해당 전원 버튼 at the back of your router.
2. Press the button once to 전원을 끄십시오.
3. 이제 분리 your Router power cable 커패시터에서 전력이 완전히 방전될 때까지 기다리십시오.
4. 그런 다음 다시 연결하다 전에, 전원 케이블 그리고 1분 후에 전원을 켜세요.
5. Wait until the network connection is re-established and try signing in again.
또한 읽기 : Fix Computers Not Showing Up on Network in Windows 10
방법 3 : 네트워크 문제 해결사 실행
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. 히트 Windows 키 및 유형 설정 문제 해결 검색 창에서 여십시오.
2. 을 클릭 추가 문제 해결사.
3. 선택 네트워크 어댑터 그리고 클릭 문제 해결사 실행.
4. Select the network adapter to diagnose 그리고 클릭 다음 보기.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, 클릭 문제 해결 도구를 닫습니다..
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
또한 읽기 : 가족 공유 YouTube TV가 작동하지 않는 문제 수정
방법 4: 시스템 파일 복구
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (시스템 파일 검사기) /DISM (배포 이미지 서비스 및 관리) utilities on your Windows 10 PC.
1. 히트 Windows 키입력 명령 프롬프트 그리고 클릭 관리자 권한으로 실행.
2. 을 클릭 가능 FBI 증오 범죄 보고서 사용자 계정 컨트롤 신속한.
3. 유형 chkdsk C : / f / r / x 명령하고 때리세요 Enter 키.
4. 메시지가 나타나면, Chkdsk를 실행할 수 없습니다...볼륨이... 사용 중입니다., 다음을 입력하세요. Y 과 충돌 Enter 키.
5. 다시 다음 명령을 입력합니다. SFC / scannow를 키를 누릅니다 Enter 키 ~을 실행하기 위해 시스템 파일 검사기 주사.
참고 : 시스템 검사가 시작되고 완료하는 데 몇 분 정도 걸립니다. 그동안 다른 활동을 계속할 수 있지만 실수로 창을 닫지 않도록 주의하세요.
스캔이 완료되면 다음 메시지 중 하나가 표시됩니다.
- Windows 리소스 보호에서 무결성 위반을 찾지 못했습니다.
- Windows 리소스 보호가 요청한 작업을 수행 할 수 없습니다.
- Windows 리소스 보호에서 손상된 파일을 발견하고 성공적으로 복구했습니다.
- Windows 리소스 보호에서 손상된 파일을 발견했지만 일부 파일을 수정할 수 없습니다.
6. 스캔이 완료되면, 다시 시작 당신의 PC.
7. 다시 시작 관리자 권한으로 명령 프롬프트 그리고 주어진 명령을 차례로 실행합니다.
dism.exe /온라인 /cleanup-image /scanhealth dism.exe /온라인 /cleanup-image /restorehealth dism.exe /온라인 /cleanup-image /startcomponentcleanup
참고 : DISM 명령을 제대로 실행하려면 인터넷에 연결되어 있어야 합니다.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. 히트 Windows 키 및 유형 장치 관리자 in the Windows search menu. Click on 엽니다.
2. 확장 네트워크 어댑터 섹션을 두 번 클릭하여 선택하세요.
3. 마우스 오른쪽 버튼을 클릭하세요. 네트워크 드라이버 (예 : Intel (R) Dual Band Wireless-AC 3168) 선택하고 기기 사용 중지 옵션을 선택합니다.
4. Confirm the below prompt by clicking on 가능.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the 기기 사용 설정 옵션을 선택합니다.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
또한 읽기 : Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. 검색 메뉴로 이동하여 다음을 입력하세요. cmd를. 를 클릭하십시오 관리자 권한으로 실행.
2. 다음을 입력하세요 명령 과 충돌 Enter 키.
netsh winsock 재설정 netsh int ip reset ipconfig를 / 해제 갱신 ipconfig / all을
3. Wait for the commands to be executed and PC 재부팅.
방법 7: DNS 캐시 플러시
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. 쏘다 명령 프롬프트 by searching in the Windows 메뉴 and click on Run as administrator.
2. 유형 ipconfig를 / flushdns를 in the command window and hit 엔터 버튼.
또한 읽기 : [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. 시작 달리기 눌러 대화 상자 Windows + R 키 함께.
2. 유형 ncpa.cpl을 명중 Enter 키.
3. Right-click on your active 네트워크 어댑터 그리고 클릭 등록.
4. 체크 해제 인터넷 프로토콜 버전 6 (TCP / IPv6) 옵션을 선택합니다.
5. 마지막으로 OK to save the changes and check if the issue is resolved.
참고 : If you use multiple network connections, navigate to 네트워크 및 공유 센터 와 어댑터 교체 settings. Right-click on the adapter and select 사용 안 함. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. 유형 장치 관리자 in the Windows search menu and click 엽니다.
2. 두 번 클릭하십시오. 네트워크 어댑터 그것을 확장합니다.
3. 마우스 오른쪽 버튼을 클릭하세요. 운전사 (예 : 인텔 (R) 듀얼 밴드 무선-AC 3168)를 클릭하고 드라이버 업데이트.
4. 을 클릭 내 컴퓨터에서 드라이버 찾아보기 to locate and install a driver manually.
5. 클릭 Browser button to choose any directory and click on 다음 보기.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, 귀하의 장치에 가장 적합한 드라이버가 이미 설치되어 있습니다.
6. 을 클릭 닫기 창을 종료합니다.
7. 다시 시작 the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. 쏘다 장치 관리자 from the Windows search menu.
2. 마우스 오른쪽 버튼으로 운전사 선택 장치 제거.
3. A warning prompt will be displayed on the screen. Check the box “이 장치의 드라이버 소프트웨어 삭제” and confirm the prompt by clicking 제거.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. 방문하다 제조업체 웹 사이트.
2. Find 와 다운로드 the drivers corresponding to the Windows version on your PC.
3. 다운로드가 완료되면 다운로드 한 파일 그리고 제공된 지침에 따라 설치하십시오.
또한 읽기 : How to set up a VPN on Windows 10
방법 10: Windows 업데이트
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. 누르세요 윈도우 + I 키 함께 열기 위해 설정 귀하의 컴퓨터에.
2. 선택 업데이트 및 보안.
3. 선택 업데이트 확인.
4A. Click 이제 설치 사용 가능한 최신 업데이트를 다운로드하고 설치합니다.
4B. 시스템이 이미 최신 상태라면 다음과 같이 표시됩니다. 당신은 최신 정보입니다 메시지.
방법 11: 최근 업데이트 제거
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. 길게 누르기 Windows + R 키 오픈을 위해 함께 달리기 대화 상자.
2. 유형 appwiz.cpl을 명중 엔터 버튼.
3. 을 클릭 설치된 업데이트보기를.
4. Select the most recent update and click on 제거.
5. Confirm the prompt, if any, and PC를 재부팅.
또한 읽기 : Firefox가 페이지를 로드하지 않는 문제를 해결하는 방법
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the 네트워크 어댑터 installed in your PC along with their settings. All the stored settings are stored to default settings.
참고 : To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to 설정 그때 와 소개. Once you have reset your network, you have to reinstall all networking software 처럼 VPN 클라이언트 or 가상 스위치.
1. 길게 누르기 Windows + I 키 함께 열기 위해 Windows 설정.
2. 을 클릭 네트워크 및 인터넷.
3. 을 클릭 네트워크 재설정 아래에 Status.
4. Confirm the prompt by clicking on 지금 재설정.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
권장 사항 :
We hope that this guide was helpful and you could fix Windows 10 network connection error 0 X 00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.