Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on 윈도우 10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Outdated network drivers.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
참고 : 문제가 발생할 경우 PC를 복원할 수 있는 시스템 복원 지점을 항상 만드십시오.
기본 문제 해결 방법
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. PC를 다시 시작합니다.
1. 누르세요 Alt + F4 키 오픈을 위해 함께 Shut Down Windows 창.
2. 를 선택합니다 다시 시작 옵션을 누르고 Enter 키.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. 라우터 이동 to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. Avoid too many devices 동일한 네트워크에 연결되어 있습니다.
4. 무선 간섭 방지 from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3. 라우터 다시 시작
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
또한 읽기 : Windows 10에서 WiFi 네트워크가 발견되지 않는 문제 수정
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. 분리 네트워크 연결이 완료되면 잠시 기다렸다가 다시 연결하세요.
2. 경우 이더넷 케이블 연결되어 있으면 PC에서 제거하세요. 그런 다음 다시 연결하거나 Wi-Fi 네트워크에 연결하세요. 이렇게 하면 유선 연결과 무선 연결 사이에 깜박임이 발생하지 않습니다.
5. 비행기 모드 비활성화
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
1. 길게 누르기 Windows + A keys 함께 열기 위해 관리 센터. 확인 비행기 모드 켜져 있습니다.
2A. If 비행기 모드 is turned on, click on the setting to turn it off.
2B. If the 비행기 모드 is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
1. 다음으로 이동하십시오. 달리기 눌러 대화 상자 Windows + R 키 함께.
2. 유형 ncpa.cpl을 명중 Enter 키.
3. Now, right-click on your active 네트워크 어댑터 and check whether it is enabled or disabled.
3A. 클릭 사용 if the status is disabled.
3B. If the 지위 is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
또한 읽기 : How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1. 히트 Ctrl + Shift + Esc 키 함께 열기 위해 Task Manager.
2. 에서 프로세스 탭을 클릭하십시오. Windows 탐색기 선택하고 다시 시작 버튼을 클릭합니다.
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
방법 2 : 네트워크 문제 해결사 실행
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
또한 읽기 : Windows 10에서 네트워크 설정을 재설정하는 방법
방법 3: 모든 백그라운드 프로세스 종료
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
방법 4: 시스템 파일 복구
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
또한 읽기 : Windows 10 Netwtw04.sys 블루 스크린 오류 수정
방법 5: 악성코드 검사 실행
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
또한 컴퓨터에서 맬웨어를 제거하려면 Windows 10의 PC에서 맬웨어를 제거하는 방법 가이드를 확인하세요.
방법 6: Windows 업데이트
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
Windows 운영 체제를 업데이트한 후 네트워크에 연결할 수 있는지 확인하세요.
또한 읽기 : Windows 10의 네트워크에 컴퓨터가 표시되지 않는 문제 수정
방법 7: VPN 및 프록시 서버 비활성화
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a 모바일 핫스팟.
Method 8: Reset TCP or IP Protocol
TCP(Transmission Control Protocol)는 네트워크 연결을 할당하고 식별하는 필수 프로토콜입니다. 규칙 와 표준 인터넷을 통한 절차. TCP/IP 프로토콜은 송신자와 수신자로부터 데이터 패킷을 전송하는 역할을 담당합니다. 프로세스에 충돌이 있는 경우 IP 주소와 함께 프로토콜을 재설정하면 논의된 문제를 해결하는 데 도움이 됩니다. TCP/IP를 재설정하려면 Windows 10에서 네트워크 연결 문제를 해결하는 방법에 대한 가이드를 따르세요.
After implementing the steps, check if you can fix network keeps dropping or not.
방법 9: Google DNS 사용
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
또한 읽기 : Windows 11에서 DNS 서버 설정을 변경하는 방법
방법 10: 절전 모드 비활성화
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. 히트 Windows 키입력 장치 관리자 그리고 클릭 엽니다.
2. 이제 네트워크 어댑터 안내
3. 그런 다음, 마우스 오른쪽 버튼을 클릭하세요. 네트워크 어댑터 선택하고 등록 표시된 대로 옵션을 선택하세요.
4. 그런 다음 Power Management 의 창 네트워크 어댑터 속성 window and uncheck the box next to 전원을 절약하기 위해 컴퓨터가이 장치를 끌 수 있음.
5. 마지막으로 OK 을 클릭하여 변경 사항을 저장합니다.
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1. 유형 서비스 검색창에 클릭하고 엽니다.
2. Now, scroll down and search for the Windows EventLog 서비스를 제공합니다.
3. 을 체크하다 Status 서비스의.
3A. 만약 Status 가 달리는, right-click on the service and select the 중지 option. Wait for a while and then click on 스타트 또.
3B. If the Status is 지원 로 설정 달리는, right-click on the service and select the 스타트 옵션을 선택합니다.
4. Repeat the above steps for the below 서비스 또한.
- 원격 프로 시저 호출 (RPC)
- Windows Update를
- DHCP 클라이언트
- 네트워크 연결 장치 자동 설정
- 네트워크 연결 브로커
- 네트워크 연결
- 네트워크 연결 도우미
- 네트워크 목록 서비스
- 네트워크 위치 인식
- 네트워크 설정 서비스
- 네트워크 스토어 인터페이스 서비스
Finally, check if you have fixed the discussed issue.
또한 읽기 : Windows에서 이 네트워크의 프록시 설정을 자동으로 감지할 수 없는 문제 수정
방법 12: 일시적으로 바이러스 백신 비활성화(해당되는 경우)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
방법 13: Windows Defender 방화벽 비활성화(권장하지 않음)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
방법 14: 네트워크 드라이버 업데이트
업데이트된 네트워크 드라이버를 사용하고 있는지, 보류 중인 업데이트가 있는지 항상 확인하고 해당 드라이버를 다운로드하여 설치하는 것이 좋습니다. Windows 10에서 네트워크 어댑터 드라이버를 업데이트하는 방법에 대한 가이드를 따르십시오. 네트워크 드라이버를 업데이트한 후, 재부팅 your computer and test the network connection. You will not 0x00028001 error code again.
또한 읽기 : 이더넷에 유효한 IP 구성 오류가 없는 문제 수정
방법 15: 네트워크 드라이버 재설치
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
네트워크 드라이버를 다시 설치한 후 문제 없이 네트워크에 연결되는지 확인하세요.
방법 16: 네트워크 드라이버 롤백
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
Windows 10 컴퓨터에 이전 버전의 드라이버를 설치한 후 중단 없이 네트워크에 연결할 수 있는지 확인하세요.
방법 17: 네트워크 설정 재설정
Several users have declared that, resetting network settings will resolve strange network connection issues. This method will forget all the network configuration settings, saved credentials, and a lot more security software like VPN and antivirus programs. To do so, follow our guide on How to Reset Network Settings on Windows 10
또한 읽기 : Windows 10에서 네트워크 파일 공유를 설정하는 방법
방법 18 : 시스템 복원 수행
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
방법 19: PC 재설정
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Method 20: Contact Internet Service Provider
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
권장 사항 :
이 가이드가 도움이 되기를 바라며 문제를 해결할 수 있기를 바랍니다. network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.