After installing the latest Windows feature update, your PC may be trapped in an automated repair cycle. This article will give you various troubleshooting techniques if you’re attempting to locate a repair approach that will allow you to resolve diagnosing your PC Windows 10 issue. So, continue reading to fix diagnosing your PC stuck issue on Windows 10.
How to Fix Stuck on Diagnosing your PC in Windows 10
We looked into this diagnosing your PC stuck issue by looking at multiple user reports and tried various repair strategies suggested by some impacted users. As it turns out, various conditions make your system trapped inside the diagnosing your PC screen. Here’s a list of circumstances that might lead to this issue on 윈도우 10.
- 시스템 파일 손상: Corrupted system files might also cause the System Diagnostic tool to appear at every system start-up. If this utility is also corrupted, it will be stuck in a loop.
- Inadequate System Space: As it turns out, this problem of this issue can also arise when the system lacks sufficient storage capacity to load all the programs and services required for the starting operation.
- Glitched Automated Repair Utility: This issue has been reported by multiple customers to be caused by mysterious system drive troubles. In this instance, the Automatic Repair program will try to open at every restart in an attempt to fix the problem, but it will be unable to locate the source of the problem.
- Faulty BCD Data: Corrupted booting data might also cause this issue in severe conditions, which prevents the starting process from finishing.
Some afflicted customers have attempted rebooting their computers to get rid of this problem but have claimed that their computers go into a dark screen, show the logo, and then return to the Diagnostic PC page. The operating system indicates that your device has been diagnosed, but there might be no progress made. You can follow the below methods to resolve the issue.
Method 1: Perform Hard Reboot
You can do a hard reboot if your Windows is unable to boot due to the Preparing Automatic Repair or Diagnosing your PC issue.
1. 플러그를 뽑으세요. AC 어댑터 및 제거 배터리 장치에서.
2. Check if it boots up normally by pressing and holding the 전원 버튼 for 20 초.
If this technique fails, try one of the following options.
또한 읽기 : Windows 10에서 WDF_VIOLATION 오류를 수정하는 방법
방법 2: 안전 모드로 부팅하고 공간 확보
As some users have discovered, this issue can also occur when the system does not have enough capacity to start. Several individuals in a similar position have overcome the problem by running their machines in Safe Mode and freeing up some space. Follow our guide on How to Boot to Safe Mode in Windows 10.
Then, perform Disk cleanup by following our guide to run Disk Cleanup.
If diagnosing your PC Windows 10 problem persists, follow the next procedure below.
방법 3: 시스템 파일 복구
It’s also possible that this problem is caused by System File corruption. These corrupted files might prevent the booting procedure from finishing. You’ll have to run the scans before the Booting phase since you can’t go beyond the Diagnostics page. Read our guide on How to Repair System Files on Windows 10.
또한 읽기 : 시간 데이터를 사용할 수 없기 때문에 컴퓨터가 다시 동기화되지 않는 문제 수정
Method 4: Run System Restore Utility
You may be dealing with a serious corruption problem that can’t be treated traditionally. When faced with a circumstance like this, the best action is to take a damage-control strategy. Most start-up troubles caused by system file corruption can be resolved by returning the machine to a healthy condition in which all components are working properly. Follow the below steps.
1. 삽입 설치 디스크 및 PC를 다시 시작하십시오..
2. 아무거나 누르세요 키 to start up the installation media when you see the booting screen.
3. When Windows Setup has finished loading, click on 컴퓨터 복구를.
4. 액세스 문제 해결 menu from the first repair menu.
5. 을 클릭 고급 옵션 from the Troubleshoot menu.
6. 그런 다음 명령 프롬프트 from the list of available utilities.
7. 열려면 시스템 복원 program, type the rstrui.exe 명령을 명령 프롬프트 창을 누르고 Enter 키.
8. 을 클릭 다음 보기 once you’ve reached the first screen.
9. 이제 진드기 the option labeled 복원 지점을 더보기.
10. Once you’ve done so, go through each restoration 스냅 사진 and pick one taken before the Diagnostics problem.
11. To go on to the next option, choose the suitable 사진 그리고 클릭 다음 보기.
12. 이제 클릭하십시오. 마감재 .
Your system will restart automatically after restoring, and the old machine will be fixed at the next system starting.
방법 5 : BCD 재 구축
In Windows 10, you’ll get the Preparing Automatic Repair error if the boot files are missing or damaged. As a result, some users will re-build the boot record using the procedures below.
1. Insert the Windows bootable installation CD into the PC displaying the error message Preparing Automatic Repair or Diagnosing your PC.
2. Start your computer by booting from the 설치 CD.
3. To continue, choose your 언어 설정을 클릭하고 다음 보기 버튼을 클릭합니다.
4. 선택 수리 너의 컴퓨터.
5. 선택 문제 해결.
6. 선택 명령 프롬프트.
7. Enter the instructions below into the prompt, and press the Enter 키 각 후.
bootrec / FIXMBR bootrec / fixboot와 bootrec / scanos bootrec / RebuildBcd
8. Then, type the command 출구 그리고 Enter 키.
9. 마지막으로, PC를 재부팅.
또한 읽기 : Windows 업데이트 오류 80072ee2 수정하는 방법
방법 6: 자동 시동 복구 비활성화
If this happens, the Automatic Start-up Repair software will launch at every system start-up. However, if the utility is broken, you might not be able to go past the start-up screen. Therefore, disabling this software would prevent the Diagnosing your PC screen from appearing.
1. As soon as you see the introductory screen, press the F8 key repeatedly to get to the 고급 부팅 옵션 메뉴를 선택합니다.
2. 선택 안전 모드 네트워킹 from the Advanced Boot Options menu by pressing the F5 키 or using the arrow keys.
3. When the booting routine is complete, press Windows + I 키 시작하기 실행 대화 상자.
4. 유형 cmd를 명중 Ctrl + Shift + Enter 키 to open an 상승 된 명령 프롬프트.
5. 을 클릭 가능 프롬프트에서.
6. 다음을 입력하십시오 명령 키를 누릅니다 Enter 키.
bcdedit / set recoveryenabled NO
7. Once the process is complete, 다시 시작 당신의 장치.
If diagnosing your PC Windows 10 problem persists or you don’t get a different error, continue the next procedure.
방법 7: 업데이트 제거
If the update fails to install properly on your device, you might face this issue. Follow the below steps to resolve the discussed issue.
1. 히트 Windows 키 및 유형 제어 패널, 다음을 클릭하세요. 엽니다.
2. 이제 클릭하십시오. 프로그램 제거 옵션 아래의 프로그램 메뉴는 그림과 같습니다.
3. 이제 클릭하십시오. 설치된 업데이트보기를 그림과 같이 왼쪽 창에
4. 이제, 다음을 참고하여 최신 업데이트를 검색하고 선택하세요. 에 설치됨 날짜를 클릭하고 제거 옵션을 다음과 같이.
5. 마지막으로 프롬프트를 확인하고 PC를 다시 시작.
Check if diagnosing your PC stuck issue persists or not.
또한 읽기 : Windows 7에서 iaStorA.sys BSOD 오류를 해결하는 10가지 방법
Method 8: Perform Repair Install
If none of the above-mentioned repair methods have worked, you’re probably dealing with a serious case of system corruption that can’t be fixed using normal methods. In this case, the only way to repair the problem is to reset every Windows component, including any booting-related tasks causing the Automatic Repair loop. You may always perform a clean installation but bear in mind that doing so will lose any saved data within your Windows system. If you choose a clean install, all your personal data, applications, games, documents, and other media will disappear. Read our guide on How to do a Clean Install of Windows 10 and implement the same.
권장 사항 :
We hope you found this information useful and that you were able to resolve stuck on diagnosing your PC in Windows 10 problem. Please let us know which technique was the most beneficial for you. Please use the form below if you have any queries or comments. Also, let us know what you want to learn next.