If you face this error message “Fix Selected boot image did not authenticate”, then your PC cannot load BIOS properly, and the main cause of this error seems to be Secure Boot. The boot sequence is saved into the database, and a violation of it seems to lead to this error message. This error can also be caused due to corrupted or incorrect BCD (Boot Configuration Data) configuration.
If you click OK, the PC will restart, and you will again be back on this error message. So without wasting any time let’s see how to actually Fix Selected boot image did not authenticate error with the help of below-listed troubleshooting guide.
[FIXED] Selected boot image did not authenticate error
Method 1: Switch to Legacy Boot in BIOS
1. Boot into BIOS, when the computer starts repeatedly press F10 or DEL to enter into BIOS 설정.
2. Now get into 시스템 구성 그런 다음 찾기 Legacy Support.
3. Enable Legacy support using the arrow keys and pressing Enter.
4. Then make sure Secure boot is disabled, if not then disable it.
5. Save changes and exit BIOS.
6. Reboot your PC and see if you can Fix Selected boot image did not authenticate error, 그렇지 않다면 계속하세요.
Method 2: Perform Hard Reset
1. Turn off your PC completely and remove the power cord.
2. 배터리를 제거하십시오. from the back of your PC.
3. Hold the power button for 20-30 seconds to perform a hard reset.
4. Again put your battery and connect the AC power cord.
5. Restart your PC and see if you’re able to fix the issue.
Method 3: Load Default BIOS Configuration
1. Turn off your laptop, then turn it on and simultaneously F2, DEL 또는 F12를 누릅니다. (제조업체에 따라 다름) BIOS 설정.
2. Now you’ll need to find the reset option to load the default configuration, and it may be named Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.
3. Select it with your arrow keys, press Enter, and confirm the operation. Your 바이오스 이제 사용할 것입니다 기본 설정.
4. Once you’re logged into Windows see if the issue with the charging is resolved or not.
방법 4: 자동 복구 실행
1. Insert the Windows 10 bootable installation DVD PC를 다시 시작하십시오.
2. When prompted to 아무 키나 누르시오 to boot from CD or DVD, press any key to continue.
3. Select your language preferences, and click Next. 수리를 클릭하십시오 왼쪽 하단에 있는 컴퓨터.
4. On choose an option screen, click 문제 해결.
5. On Troubleshoot screen, click the 고급 옵션.
6. On the Advanced options screen, click 자동 복구 또는 시동 복구.
7. Wait till the Windows 자동/시동 복구 완전한.
8. Restart and you have successfully Fix Selected boot image did not authenticate error, if not, continue.
또한 읽기 : How to fix Automatic Repair couldn’t repair your PC.
Method 5: Run Hardware Diagnostics
그래도 할 수 없다면 Fix Selected boot image did not authenticate error, then chances are your hard disk might be failing. In this case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace the Hard Disk or not. But instead of hard disk, any other hardware might also be failing such as memory or notebook panel etc.
To run Diagnostics restart your PC and as the computer starts (before the boot screen), press F12 key. When the Boot menu appears, highlight the Boot to Utility Partition option or the Diagnostics option press enter to start the Diagnostics. This will automatically check all the hardware of your system and will report back if any issue is found.
권장 사항 :
그게 당신이 성공적으로 Fix Selected boot image did not authenticate error if you still have any questions regarding this post then feel free to ask them in the comment’s section.