Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
재부팅 및 적절한 부팅 장치 선택 문제 [해결됨]
Method 1: Set Correct Boot Order
"라는 오류가 표시될 수 있습니다.Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. 컴퓨터가 시작되면(부팅 화면 또는 오류 화면 전) Delete 또는 F1 또는 F2 키(컴퓨터 제조업체에 따라 다름)를 반복해서 눌러 enter BIOS setup.
2. BIOS 설정에 들어가면 옵션 목록에서 Boot(부팅) 탭을 선택합니다.
3.이제 컴퓨터가 하드 디스크 또는 SSD 부팅 순서에서 최우선 순위로 설정됩니다. 그렇지 않은 경우 위쪽 또는 아래쪽 화살표 키를 사용하여 하드 디스크를 맨 위에 설정합니다. 이는 컴퓨터가 다른 소스가 아닌 하드 디스크에서 먼저 부팅됨을 의미합니다.
4. 마지막으로 F10 키를 눌러 이 변경 사항을 저장하고 종료합니다. 이 있어야합니다 Fix Reboot and Select Proper Boot Device Issue, 그렇지 않은 경우 계속합니다.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
진단을 실행하려면 PC를 다시 시작하고 컴퓨터가 시작되면(부팅 화면 전) F12 키를 누르고 부팅 메뉴가 나타나면 유틸리티 파티션으로 부팅 옵션 또는 진단 옵션을 강조 표시하고 Enter 키를 눌러 진단을 시작합니다. 그러면 시스템의 모든 하드웨어가 자동으로 확인되고 문제가 발견되면 다시 보고합니다.
권장 사항 : Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
중요 사항: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Windows 10 부팅 가능한 설치 DVD를 넣고 PC를 다시 시작합니다.
2. CD 또는 DVD에서 부팅하려면 아무 키나 누르라는 메시지가 표시되면 아무 키나 눌러 계속합니다.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. 다시 시작하면 성공적으로 Fix Reboot and Select Proper Boot Device issue, if not, continue.
또한 자동 복구로 인해 PC를 복구할 수 없는 문제를 해결하는 방법도 읽어보세요.
Method 5: Enable UEFI Boot
1. PC를 다시 시작하고 PC에 따라 F2 또는 DEL을 눌러 부팅 설정을 엽니다.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
참고 : 항상 시스템 예약 파티션(일반적으로 100mb)을 활성 상태로 표시하고 시스템 예약 파티션이 없으면 C: 드라이브를 활성 파티션으로 표시합니다.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
방법 7: Windows 10 설치 복구
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
그게 당신이 성공적으로 수정 Reboot and Select proper Boot device issue 그러나 이 게시물과 관련하여 여전히 질문이 있는 경우 댓글 섹션에서 자유롭게 질문하세요.