February 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Piştrast bikin ku hûn xalek vegerandinê biafirînin, tenê heke tiştek xelet derkeve.

Not: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Rêbaz 1: Destpêka Bilez Veqetînin

1.Press Windows Key + R then type control and hit Enter to open Panel Control

panela kontrolê

2.Click on Hardware and Sound hingê bikirtînin Hilbijêre Power.

Vebijarkên hêzê di panela kontrolê de

3. Dûv re ji pencereya çepê "" hilbijêrinHilbijêre kîjan buttonsên hêza xwe bikin."

hilbijêrin ka bişkokên hêzê çi dikin ku USB nayê naskirin

4. Niha li ser "Guhertinên Guherandinên ku niha nayê peyda kirin."

mîhengên ku niha ne berdest in biguherînin

5. Hilbijêre "Destpêk destpêkek zû bike” û li ser Save Guherandinên bikirtînin.

Hilbijartina Destpêkirina bilez Vekin

Rêbaz 2: Tamîrkirina otomatîkî bimeşîne

1.DVD-ya sazkirinê ya bootable Windows 10 têxe û PC-ê nûve bike.

2.When prompted to Bişkojkek bişkînin ji bo bootkirina ji CD an DVD-yê, ji bo berdewamkirina bişkojkê bikirtînin.

Bişkojkî bikişînin da ku ji CD an DVD-yê boot

3. Vebijêrkên zimanê xwe hilbijêrin, û Next bikirtînin. Bikirtînin Tamîrkirin komputera we li jêr-çepê.

Tamîrkirina komputerê

4.Li ser ekranek vebijarkek hilbijêrin, bikirtînin Troubleshoot.

Di tamîrkirina destpêkirina otomatîkî ya windows 10 de vebijarkek hilbijêrin

5.Li ser ekrana Troubleshoot, bitikîne Vebijêrkek pêşketî.

vebijarka pêşkeftî ji ekrana çareserkirina pirsgirêkan hilbijêrin

6.Li ser ekrana vebijarkên pêşkeftî, bikirtînin Tamîrkirina Otomatîk an Tamîrkirina Destpêkê.

tamîrkirina otomatîkî bimeşîne

7. Li bendê bin Windows Otomatîk / Tamîrên Destpêkê temamkirin.

8.Restart û hûn bi serkeftî Fix Computer does not start until restarted multiple times issue, eger na, berdewam bike.

Her weha, bixwînin Meriv çawa tamîrkirina otomatîkî nikare PC-ya xwe tamîr bike.

Rêbaz 3: BIOS-ê vegerîne mîhengên xwerû

1.Lapptopa xwe vemirînin, dûv re wê vekin û bi hev re çapemeniyê F2, DEL an F12 (li gorî çêkerê we ve girêdayî ye) têkevinê Sazkirina BIOS.

bişkojka DEL an F2 bikirtînin da ku têkevin Setup BIOS

2.Now you’ll need to find the reset option to barkirina veavakirina xwerû û dibe ku navê wê wekî Vegerandina xwerû, Barkirina Vebijêrkên fabrîkayê, Paqijkirina Mîhengên BIOS-ê, Veguheztinên sazkirinê yên barkirinê, an tiştek mîna wê were binav kirin.

barkirina veavakirina xwerû di BIOS-ê de

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS niha wê bikar bînin mîhengên default.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Kontrol bikin ka Hard Dîska Komputerê bi rêkûpêk ve girêdayî ye

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Rêbaz 5: Dabînkirina Hêzê kontrol bikin

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Dabînkirina hêzê ya xelet

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Rêbaz 7: Vegerandina ATX

Not: Ev pêvajo bi gelemperî ji bo laptopan derbas dibe, ji ber vê yekê heke we komputerek heye wê hingê vê rêbazê bihêle.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Niha pîlê jê bikin ji paş ve û pêl û pêl bişkoka hêzê ji bo 15-20 çirkeyan.

pîlê xwe derxin

Not: Hêj têra elektrîkê girênedin, em ê ji we re bibêjin kengê hûn wiya bikin.

3.Now plug in korda hêza te (Divê pîlê neyê danîn) û hewl bidin ku laptopa xwe boot bikin.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Baştir e:

Ew e ku hûn bi serfirazî Fix Computer does not start until restarted multiple times issue lê heke hîna jî pirsên we di derbarê vê rêbernameyê de hebin, wê hingê di beşa şîroveyê de ji wan bipirsin.