When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Pergala Xebatê ya Dembûyî.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon
2. If the status is set to Ne girêdayî ye, li ser hilbijêre Network globe icon, choose your Wi-Fi network and click on Bihevgirêdan button. Make sure Modeya Aeropane ne vekirî ye.
3. If you again face the same network connection error code, then click on the Vekin button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Li ser-rast-bikirtînin Icon-Wi-Fi Û hilbijêrin Open Network & Internet settings.
6. Kılik lı ser Wi-Fi.
7. Scroll down the right menu, click on Rêgezên naskirî bistînin.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Jibîrkirin.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Not: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Bibîne Button button at the back of your router.
2. Press the button once to vemirîne.
3. Naha, hevqetandin ya te Router power cable û li bendê bimînin heya ku hêz bi tevahî ji kapasatoran were derxistin.
4. Paşê, vekin ew kabloya hêzê û piştî deqeyekê vekin.
5. Wait until the network connection is re-established and try signing in again.
Her weha bixwîne: Di Windows 10-ê de Komputerên ku li ser torê nayên xuyang kirin rast bikin
Rêbaz 3: Troubleshooter-a Torgilokê bixebitînin
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Lêxin Kilîta Windows û cureyê Mîhengên tengasiyê di barê lêgerînê de û Vekirî.
2. Kılik lı ser Pirsgirêkên pêvek.
3. Neqandin Adapterê torê û bitikîne Daxistina pirsgirêkek bistînin.
4. Select the network adapter to diagnose û bitikîne Piştî.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kılik LI SER Pirsgirêka Bixebitîne.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Her weha bixwîne: Parvekirina Malbatê ya YouTube TV Naxebite rast bikin
Rêbaz 4: Pelên Pergalê Tamîr bikin
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Pergala pelê ya pergalê) /DISM (Servîsa Rêvebir û Rêveberiyê) utilities on your Windows 10 PC.
1. Lêxin Kilîta Windows, cureyê Fermana Biryara û bitikîne Wekî birêvebirin.
2. Kılik lı ser Erê di Kontrola hesabê bikarhêner derhal.
3. Awa chkdsk C: / f / r / x ferman û lêdan Bişkojka binivîse.
4. If you are prompted with a message, Chkdsk cannot run…the volume is… in use process, then, type Y û lêdan Bişkojka binivîse.
5. Again, type the command: sfc / scannow Û çapemeniyê Bişkojka binivîse bisekinin Pergala pelê ya pergalê lêgerîn.
Not: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Parastina Çavkaniya Windows -ê binpêkirinên yekparêziyê nedît.
- Windows Resource Protection could not perform the requested operation.
- Windows Resource Protection found corrupt files and successfully repaired them.
- Parastina Çavkaniya Windows-ê pelên xirab dîtin lê nekarî hin ji wan rast bike.
6. Once the scan is finished, veguhestin PC-ya we.
7. Again, launch Fermandarê wekî birêvebirinê and execute the given commands one after the other:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Not: You must have a working internet connection to execute DISM commands properly.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Lêxin Kilîta Windows û cureyê Rêveberê Gerînendeyê in the Windows search menu. Click on Vekirî.
2. Berfireh bikin Adapterên torê beşê bi du-klîk li ser wê.
3. Li ser xwe rast-klîk bikin ajokerê torê (bo nimûne, Intel (R) Dual Band Wireless-AC 3168) û hilbijêrin Amûrek neçalak bike dibe.
4. Confirm the below prompt by clicking on Erê.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Amûrek çalak bike dibe.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Her weha bixwîne: Windows-ê rast bike nikare bixweber mîhengên Proxy-a vê Torê bibîne
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Biçe pêşeka lêgerînê û binivîse cmd. Kılik lı ser Wekî birêvebirin.
2. Li jêr binivîse emrê û lêdan Bişkojka binivîse.
netsh winsock veguhestin netsh int ip reset ipconfig / release ipconfig / nûze
3. Wait for the commands to be executed and PC-ya xwe ji nû ve vekin.
Rêbaz 7: Cache DNS bişon
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Destpêkirin Fermana Biryara by searching in the Windows qerta xûrekê and click on Run as administrator.
2. Awa ipconfig / flushdns in the command window and hit Derbasbûn.
Her weha bixwîne: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Destpêkirin Rev qutiya diyalogê bi tikandinê Bişkojkên Windows + R bihevra.
2. Awa ncpa.cpl û xistin Bişkojka binivîse.
3. Right-click on your active adapterê torê û bitikîne Properties.
4. Hilbijêre Guhertoya Protokola Internetnternetê 6 (TCP / IPv6) dibe.
5. Di dawiyê de, li ser bitikîne OK to save the changes and check if the issue is resolved.
Not: If you use multiple network connections, navigate to Navenda Tora Navneteweyî û Tevlêbûnê û Adapter veguherînin settings. Right-click on the adapter and select neçalak bike. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Awa Rêveberê Gerînendeyê in the Windows search menu and click Vekirî.
2. Du caran li ser bikirtînin Adapterên torê wê fireh bikin.
3. Li ser xwe rast-klîk bikin ajotvan (mînak Intel (R) Dual Band Wireless-AC 3168) û bikirtînin Driverê nûve bike.
4. Kılik lı ser Li komputerê min li ajokaran bigerin to locate and install a driver manually.
5. Li ser binêrin browser button to choose any directory and click on Piştî.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Ger ew jixwe di qonaxek nûvekirî de ne, ekran peyama jêrîn nîşan dide, Ajokarên çêtirîn ji bo cîhaza we jixwe hatine saz kirin.
6. Kılik lı ser Nêzîkî derketina ji pencereyê.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Destpêkirin Rêveberê Gerînendeyê from the Windows search menu.
2. Li ser-rast-bikirtînin ajotvan Û hilbijêrin Dabeşkirina Destan.
3. A warning prompt will be displayed on the screen. Check the box “Ji bo vê amûra pergala ajokerê jêbirin” and confirm the prompt by clicking Rakirin.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Serdana li malpera çêker.
2. Dîtin û download ajokarên ku bi guhertoya Windows-ê ya li ser PC-ya we re têkildar in.
3. Once downloaded, double click on the pelê daxistî û rêwerzên hatine dayîn bişopînin da ku wê saz bikin.
Her weha bixwîne: Meriv çawa VPN-ê li ser Windows 10 saz dike
Rêbaz 10: Windows-ê nûve bikin
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Pressap bikin Windows + ez keys bi hev re vekin Mîhengên li komputerê ye.
2. Neqandin Nûvekirin & Ewlekarî.
3. Neqandin Ji bo agahdariyên kontrol bikin.
4A. Click Naha saz bikin to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Tu rojane yî agah.
Rêbaz 11: Nûvekirinên Dawî Rakin
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Çap bike û bigire Bişkojkên Windows + R bi hev re vekin Rev boxa dialog
2. Awa appwiz.cpl û xistin Derbasbûn.
3. Kılik lı ser Guherandinên sazkirî bibînin.
4. Select the most recent update and click on Rakirin.
5. Confirm the prompt, if any, and PC-ê ji nû ve saz bikin.
Her weha bixwîne: Meriv çawa rûpelên ku Firefox-ê nayên barkirin rast dikin
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Not: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Mîhengên paşan Sîstem û Ji dor. Once you have reset your network, you have to reinstall all networking software çawa Xerîdarên VPN or Guhestina Virtual.
1. Çap bike û bigire Bişkojkên Windows + I bi hev re vekin Settings Settings.
2. Kılik lı ser Torgilok & Internetnternet.
3. Kılik lı ser Reset torê binê Rewş.
4. Bi tikandina li ser daxwazê piştrast bikin Naha resen bikin.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Baştir e:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.