When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Эскирген операциялык система.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe сөлөкөтү.
2. If the status is set to Туташкан жок, Бас Network globe icon, choose your Wi-Fi network and click on байланышуу button. Make sure учак режими күйгүзүлгөн жок.
3. If you again face the same network connection error code, then click on the ажыратуу button, wait for some time and reconnect it again.
4. Try connecting to a different WiFi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. чыкылдатуу менен Wi-Fi сүрөтчөсү жана тандоо Open Network & Internet settings.
6. Click жөнүндө WiFi.
7. Scroll down the right menu, click on белгилүү тармактарды башкаруу.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Унут.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Метод 2: Маршрутизаторду өчүрүп күйгүзүңүз
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Эскертүү: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. табуу Кубат баскычы at the back of your router.
2. Press the button once to өчүрүү.
3. Азыр, ажыратуу сенин Router power cable жана кубат толугу менен конденсаторлордон чыкканга чейин күтө туруңуз.
4. Андан кийин, кайрадан кошуу The кубат кабели жана бир мүнөттөн кийин аны күйгүзүңүз.
5. Wait until the network connection is re-established and try signing in again.
Ошондой эле окуу: Windows 10до тармакта көрүнбөгөн компьютерлерди оңдоо
3-ыкма: Тармактын мүчүлүштүктөрүн аныктоону иштетүү
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. басыңыз Windows баскычы жана түрү Көйгөй орнотуулары издөө тилкесинде жана Open.
2. Click жөнүндө Кошумча мүчүлүштүктөрдү издөө каражаттары.
3. тандоо Network адаптер жана чыкылдатуу чечкичти иштеткенде.
4. Select the network adapter to diagnose жана чыкылдатуу кийинки.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Бас Көйгөйдү чечүүчү түзмөктү жабыңыз.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Ошондой эле окуу: Үй-бүлө менен бөлүшүү YouTube TV иштебей жатканын оңдоо
Метод 4: Системалык файлдарды оңдоо
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Тутум File текшергичи) /DISM (Чагылдырма-кызматты тейлөө жана башкаруу) utilities on your Windows 10 PC.
1. басыңыз Windows баскычы, түрү команда киргизүүгө чакыруу жана чыкылдатуу администратору катары иштетүү.
2. Click жөнүндө Ооба ичинде Колдонуучунун каттоо жазуусун башкаруу ыкчам.
3. Түрү chkdsk C: / f / r / x буйрук жана сокку баскычын кириш.
4. Эгер сизден билдирүү сунушталса, Chkdsk иштей албайт… Көлөмү… колдонуу процессинде, анан териңиз Y менен уруп баскычын кириш.
5. Кайрадан буйрукту териңиз: СЭМБ / scannow жана пресс-релиздер баскычын кириш иштетүү Тутум File текшергичи сканерлөө.
Эскертүү: Системаны сканерлөө башталат жана аны бүтүрүү үчүн бир нече мүнөт талап кылынат. Ошол эле учурда, сиз башка иш-аракеттерди аткарууну уланта берсеңиз болот, бирок терезени кокусунан жаппоону унутпаңыз.
Скандоону аяктагандан кийин, ал төмөнкү билдирүүлөрдүн бирин көрсөтөт:
- Windows Ресурстарды коргоо эч кандай бүтүндүк бузууларды тапкан жок.
- Windows ресурстарын коргоо суралган операцияны аткара алган жок.
- Windows ресурстарын коргоо бузулган файлдарды таап, аларды ийгиликтүү оңдоду.
- Windows ресурстарын коргоо бузулган файлдарды тапты, бирок алардын айрымдарын оңдой алган жок.
6. Скандоо аяктагандан кийин, кайра жүргүзүү сиздин PC.
7. Дагы, ишке киргизүү администратору катары команда киргизүүгө чакыруу жана берилген буйруктарды биринин артынан бири аткарыңыз:
dism.exe /Онлайн /тазалоо-сүрөт /scanhealth dism.exe /Онлайн /тазалоо-сүрөт /калыбына келтирүү dism.exe /Online /cleanup-image /startcomponentcleanup
Эскертүү: DISM буйруктарын туура аткаруу үчүн сизде иштеген интернет байланышы болушу керек.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. басыңыз Windows баскычы жана түрү Аппарат менеджери in the Windows search menu. Click on ачык.
2. кеңейтиңиз желе ыктагычтары аны эки жолу чыкылдатуу менен бөлүм.
3. Оң баскычты басыңыз Тармак драйвери (Мисалы, Intel (R) Dual Band Wireless-AC 3168) жана тандоо өчүрүү түзмөк тандоо.
4. Confirm the below prompt by clicking on Ооба.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Түзмөктү иштетүү тандоо.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Ошондой эле окуу: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Издөө менюсуна өтүп, териңиз CMD. Click жөнүндө администратору катары иштетүү.
2. Төмөнкүлөрдү териңиз буйруулар менен уруп баскычын кириш.
netsh WinSock абалга netsh Int Ип абалга ipconfig /-релиз ipconfig / кайрадан
3. Буйруктардын аткарылышын күтүңүз жана сиздин PC өчүрүп-күйгүзүү.
Метод 7: DNS кэшин тазалоо
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. учуруу команда киргизүүгө чакыруу by searching in the Windows меню and click on Run as administrator.
2. Түрү ipconfig / flushdns in the command window and hit кирүү.
Ошондой эле окуу: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Run басуу менен диалог терезеси Windows + R баскычтары бирге.
2. Түрү ncpa.cpl менен чапты баскычын кириш.
3. Right-click on your active желе адаптери жана чыкылдатуу касиеттери.
4. белгини алып салыңыз Интернет протоколунун 6-версиясы (TCP / IPv6) тандоо.
5. Акырында, басыңыз OK to save the changes and check if the issue is resolved.
Эскертүү: If you use multiple network connections, navigate to Тармак жана бөлүшүү борбору жана Адаптерди алмаштырыңыз settings. Right-click on the adapter and select өчүрүү. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Түрү Аппарат менеджери in the Windows search menu and click ачык.
2. дегенди эки жолу басыңыз желе ыктагычтары аны кеңейтүү.
3. Оң баскычты басыңыз айдоочу (мисалы, Intel(R) Dual Band Wireless-AC 3168) чыкылдатыңыз Драйверди жаңылоо.
4. Click жөнүндө Айдоочулар үчүн компьютеримди карап чыгыңыз to locate and install a driver manually.
5. чыкылдатып Browser button to choose any directory and click on кийинки.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Түзмөгүңүз үчүн эң мыкты драйверлер мурунтан эле орнотулган.
6. Click жөнүндө жакын терезени чыгуу.
7. Кайра жүргүзүү the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. учуруу Аппарат менеджери from the Windows search menu.
2. чыкылдатуу менен айдоочу жана тандоо орнотулганды алып салуу түзмөк.
3. A warning prompt will be displayed on the screen. Check the box “Бул түзмөктүн драйвер программасын жок кылыңыз” and confirm the prompt by clicking орнотулганды алып салуу.
4. Download and install the drivers on your device either by a manual update or automatic update.
2. табуу жана Download сиздин компьютериңиздеги Windows версиясына туура келген драйверлер.
3. Once downloaded, double click on the жүктөлгөн файл and follow the given instructions to install it.
Ошондой эле окуу: How to set up a VPN on Windows 10
Метод 10: Windows жаңыртуу
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. басма сөз Windows+I ачкычтар ачуу үчүн чогуу Орнотуулар сиздин боюнча.
2. тандоо Жаңыртуу жана Коопсуздук.
3. тандоо Өзгөрүүлөр текшерүү.
4A. Click азыр орнотуу to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Сиз жаңырды билдирүү.
Method 11: Uninstall Recent Updates
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. басып, кармаңыз Windows + R баскычтары ачуу үчүн чогуу Run баарлашуу терезечеси.
2. Түрү appwiz.cpl менен чапты кирүү.
3. Click жөнүндө ЖМКнын орнотулган өзгөрүүлөр.
4. Select the most recent update and click on орнотулганды алып салуу.
5. Confirm the prompt, if any, and компьютерди кайра жүктөө.
Ошондой эле окуу: Firefox барактар жүктөлбөй жатканын кантип оңдоого болот
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Эскертүү: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Орнотуулар ошондо система жана жөнүндө. Once you have reset your network, you have to reinstall all networking software сыяктуу VPN кардарлары or Виртуалдык которгучтар.
1. басып, кармаңыз Windows + I баскычтары ачуу үчүн чогуу Windows Орнотуулар.
2. Click жөнүндө Тармак жана Интернет.
3. Click жөнүндө Тармакты баштапкы абалына келтирүү астында абал.
4. чыкылдатуу менен эскертүүнү ырастаңыз эми кайра орнотуу.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
сунушталат:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.