When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Malware impetum aut virus.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Non connected, Deprime Network globe icon, choose your Wi-Fi network and click on Connect button. Make sure Vivamus modum conversus non est.
3. If you again face the same network connection error code, then click on the Kill button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Vox-click in Wi-FI icon et eligere Open Network & Internet settings.
6. Click Wi-Fi.
7. Scroll down the right menu, click on Curo notum retiacula.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Obliviscatur.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Modus I: Sileo iter itineris
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nota: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. invenire vox puga pyga at the back of your router.
2. Press the button once to turn est.
3. Nunc, disconnect vestra Router power cable et expecta donec virtus funditus exsanguis sit ex facultatibus.
4. Deinde, reconnect quod potentia cable et post minutam switch eam.
5. Wait until the network connection is re-established and try signing in again.
Item Read; Fix Computers Not Showing Up on Network in Windows 10
IV modum curre Network Troubleshooter
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. percute Fenestra key et genus occasus Troubleshoot et in quaero talea Aperta.
2. Click Additional Troubleshooters.
3. select network nibh et click Curre ad troubleshooter.
4. Select the network adapter to diagnose et click deinde.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, click Claudere troubleshooter.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Item Read; Genus figere Socius YouTube TV not working
Modus V: Repair Ratio Lima
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Ratio Lima Sedatus) /DISM (Et Management muneris deployment Image) utilities on your Windows 10 PC.
1. percute Fenestra key, genus To order Promptus et click Curre, ut administrator.
2. Click Yes in User Ratio Imperium promptum.
3. genus chkdsk C: / f / r / x imperium et hit intra key.
4. Si cum mandatis, Chkdsk potest currere ... volumen est ... in usu processusergo genus Y dirigens et casu percussit intra key.
5. Iterum typus imperium; SFC / scannow et torcular intra key currere the Ratio Lima Sedatus scan.
Nota: Ratio photographica initiabitur et duo minuta ad perficiendum capiet. Interea alias actiones pergere potes, sed memineris ne fenestram fortuitus claudas.
Peracta lustra, utramvis epistulae istas ostendet;
- Fenestra Resource Praesidium integritatis violationes non invenit.
- Fenestra Resource Praesidium petitum operationem praestare non potuit.
- Fenestra Resource Praesidium invenit tabulas corruptas easque feliciter reparavit.
- Windows Resource Praesidium invenit tabulas corruptas sed aliquas ex eis figere non potuit.
6. Postquam peractum est; sileo vestri PC.
7. Iterum, launch To order Promptus ut administrator datis imperata exequuntur;
dism.exe /Online/cleanup-image/scanhealth dism.exe /Online/cleanup-image/restituerehealth dism.exe /Online /cleanup-image/startcomponentcleanup
Nota: Interrete connexionem habere debes ut mandata DISM recte exequatur.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. percute Fenestra key et genus Manager fabrica in the Windows search menu. Click on Patefacio.
2. Expand the Network adapters section by double-clicking on it.
3. Vox-click in Network exactoris (Eg Intel (R) Dual Band Wireless-AC 3168) et eligere autem inactivare fabrica optio.
4. Confirm the below prompt by clicking on Yes.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Admitte fabrica optio.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Item Read; Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Vade ad investigationem menu et typus cmdoptH. Click Curre, ut administrator.
2. Typus sequuntur imperium dirigens et casu percussit intra key.
netsh Winsock reset netsh int IP reset ipconfig / release ipconfig / renovare
3. Exspecta mandata exsecutioni mandari reboot vestri PC.
Modus V: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lorem To order Promptus by searching in the Fenestra Menu and click on Run as administrator.
2. genus ipconfig / flushdns in the command window and hit Enter.
Item Read; [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Dóminus illuminátio mea est Curre alternis buxum deprimendo Windows + R claves simul.
2. genus ncpa.cpl et ledo intra key.
3. Right-click on your active network nibh et click Properties.
4. notam Internet Protocol Version IV (TCP / IPv6) optio.
5. Demum deprime OK to save the changes and check if the issue is resolved.
Nota: If you use multiple network connections, navigate to Network quod Socius Center et mutare semper nibh ut settings. Right-click on the adapter and select disable. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. genus Manager fabrica in the Windows search menu and click Patefacio.
2. Geminus click in Network adapters ad expand est.
3. Vox-click in agitator (eg Intel(R) Dual Band Wireless-AC 3168) And click Update exactoris.
4. Click Browse meus computer pro coegi to locate and install a driver manually.
5. Click in pasco button to choose any directory and click on deinde.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Optimum coegi pro tuom iam installed.
6. Click Close quispiam egredi fenestram.
7. Sileo the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lorem Manager fabrica from the Windows search menu.
2. Vox-click in agitator et eligere Uninstall fabrica.
3. A warning prompt will be displayed on the screen. Check the box “Haec fabrica coegi software delere” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Visita est Manufacturer scriptor website.
2. Find et Download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the downloaded file and follow the given instructions to install it.
Item Read; How to set up a VPN on Windows 10
Modus I: Renova Fenestra
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. in Press Ut Fenestra + claves, simul aperire occasus in vestri computer.
2. select Update & Security.
3. select Reprehendo pro Updates.
4A. Click Nunc install to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Tu usque ad diem nuntium.
Method 11: Uninstall Recent Updates
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. torcular et tenere Windows + R claves simul aperire Curre alternis sermonibus arca archa.
2. genus ipsa et ledo Enter.
3. Click View updates installed.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and reboot PC *.
Item Read; Quam figere Firefox non loading Paginae
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Nota: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to occasus tum ratio et About. Once you have reset your network, you have to reinstall all networking software sicut VPN clients or Virtual switches.
1. torcular et tenere Ego claves + Fenestra simul aperire Occasus Fenestra.
2. Click & Internet Network.
3. Click Network reset sub Status.
4. Confirma promptum strepitando in nunc Reset.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recommended:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.