Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
ໃຫ້ແນ່ໃຈວ່າສ້າງຈຸດຟື້ນຟູພຽງແຕ່ໃນກໍລະນີທີ່ມີບາງຢ່າງຜິດພາດ.
ວິທີທີ່ 1: ປິດການໃຊ້ງານຊົ່ວຄາວ Antivirus ແລະ Firewall
1.ຄລິກຂວາໃສ່ປຸ່ມ ໄອຄອນໂປຣແກຣມຕ້ານໄວຣັສ ຈາກຖາດລະບົບແລະເລືອກ ປິດການໃຊ້ວຽກ
2.Next, ເລືອກເຟຣມທີ່ໃຊ້ເວລາສໍາລັບການທີ່ Antivirus ຈະຍັງຄົງຖືກປິດໃຊ້ງານ.
ຫມາຍເຫດ: ເລືອກຈໍານວນຫນ້ອຍທີ່ສຸດຂອງເວລາທີ່ເປັນໄປໄດ້ສໍາລັບການຍົກຕົວຢ່າງ 15 ນາທີຫຼື 30 ນາທີ.
3.Once done, again check if the error resolves or not.
4.ກົດ Windows Key + I ຈາກນັ້ນເລືອກ Control Panel
5.ຕໍ່ໄປ, ໃຫ້ຄລິກໃສ່ ລະບົບແລະຄວາມປອດໄພ.
6.ຫຼັງຈາກນັ້ນ, ໃຫ້ຄລິກໃສ່ Windows Firewall.
7.Now ຈາກປ່ອງຢ້ຽມຊ້າຍ pane ໃຫ້ຄລິກໃສ່ເປີດ Windows Firewall ຫຼືປິດ.
8.ເລືອກ ປິດ Windows Firewall ແລະ restart PC ຂອງທ່ານ. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
ຖ້າວິທີການຂ້າງເທິງນີ້ບໍ່ໄດ້ຜົນ, ໃຫ້ແນ່ໃຈວ່າເຮັດຕາມຂັ້ນຕອນດຽວກັນເພື່ອເປີດ Firewall ຂອງທ່ານອີກເທື່ອຫນຶ່ງ.
Method 2: Delete Hidden Network Adapters
1.ກົດ Windows Key + R ແລ້ວພິມ devmgmtmsc ແລະກົດ Enter ເພື່ອເປີດ ຕົວຈັດການອຸປະກອນ.
2.ຕອນນີ້ເລືອກ Network Adapters ແລະຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ ເບິ່ງ> ສະແດງອຸປະກອນທີ່ເຊື່ອງໄວ້.
3.Right-click on each of the hidden devices and select ຖອນການຕິດຕັ້ງອຸປະກອນ.
4.Do this for all the hidden devices listed under Network Adapters.
5.Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງ.
Method 3: Turn ON Network Discovery
1.ກົດ Windows Key + X ແລ້ວເລືອກ Control Panel
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings ຈາກເມນູຊ້າຍມື.
4.Check mark ເປີດການຄົ້ນພົບເຄືອຂ່າຍ and click Save changes.
5.Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງແລະເບິ່ງວ່າທ່ານສາມາດ Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1.ກົດ Windows Key + R ແລ້ວພິມ ncpacpl ແລະກົດ Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select ຄຸນສົມບັດ.
3. ເລືອກ Internet Protocol Version 4 (TCP / IPv4) ແລະກົດ Properties.
4.ຕອນນີ້ຄລິກ ແບບພິເສດ in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “ເປີດໃຊ້ NetBIOS ຜ່ານ TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1.ກົດ Windows Key + X ແລ້ວເລືອກ Control Panel
2.ປະເພດ ໃບຢັ້ງຢືນ in the control panel search and click on ຜູ້ຈັດການ Credential.
3. ເລືອກ ຂໍ້ມູນປະຈຳຕົວຂອງ Windows ແລະຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ Add a Windows credential.
4.One by one type the ຊື່ຜູ້ໃຊ້ແລະລະຫັດຜ່ານ of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select ຄຸນສົມບັດ.
2.ສະຫຼັບໄປ ແຖບການແບ່ງປັນ and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “ແບ່ງປັນໂຟນເດີນີ້” and make sure the Share name is correct.
4.ກົດ Apply ຕາມດ້ວຍ OK.
Method 7: Change Network Security settings
1.ກົດ Windows Key + R ແລ້ວພິມ secpolmsc ແລະກົດ Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3.Double click ສຸດ Network security: LAN Manager authentication level in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5.ກົດ Apply ຕາມດ້ວຍ OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
ວິທີທີ່ 8: ຕັ້ງຄ່າ TCP / IP
1. ຄລິກຂວາໃສ່ປຸ່ມ Windows ແລະເລືອກ “Command Prompt (Admin)."
2. ຕອນນີ້ພິມຄໍາສັ່ງຕໍ່ໄປນີ້ແລ້ວກົດ enter ຫຼັງຈາກແຕ່ລະອັນ:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3. ເປີດ Admin Command Prompt ອີກຄັ້ງ ແລະພິມສິ່ງຕໍ່ໄປນີ້ແລ້ວກົດ enter ຫຼັງຈາກແຕ່ລະອັນ:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip reset
- netsh winsock reset
4.ຣີບູດເພື່ອນຳໃຊ້ການປ່ຽນແປງ.
ແນະນໍາສໍາລັບທ່ານ:
ນັ້ນແມ່ນທ່ານໄດ້ສໍາເລັດຜົນ Fix Error code 0x80070035 The network path was not found ແຕ່ຖ້າທ່ານຍັງມີຄໍາຖາມໃດໆກ່ຽວກັບຂໍ້ຄວາມນີ້, ກະລຸນາຖາມພວກເຂົາຢູ່ໃນສ່ວນຄໍາເຫັນ.