If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
Fix Network Adapter Missing in Windows 10
ໃຫ້ແນ່ໃຈວ່າສ້າງຈຸດຟື້ນຟູພຽງແຕ່ໃນກໍລະນີທີ່ມີບາງຢ່າງຜິດພາດ.
Method 1: Reboot your Computer
Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.
1 ໃຫ້ຄລິກໃສ່ ເມນູເລີ່ມຕົ້ນ ແລະຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ ປຸ່ມພະລັງງານ available at the bottom left corner.
2. ຕໍ່ໄປ, ໃຫ້ຄລິກໃສ່ ເລີ່ມຕົ້ນໃຫມ່ option and your computer will restart itself.
After the computer restarts, check if your problem is resolved or not.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. Now type the following command and press Enter after each one:
ipconfig / release ipconfig / flushdns ipconfig / renew
3. Again open Command Prompt and type the following command one by one and hit enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip reset netsh winsock reset
4. Reboot to apply changes. Flushing DNS seems to Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. ກົດ Windows Key + R ແລ້ວພິມ servicesmsc ແລະກົດ Enter.
2. ຊອກຫາ WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. ຄລິກສອງຄັ້ງໃສ່ WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select ອັດຕະໂນມັດ.
5. Click Apply followed by OK.
6. ກົດຂວາໃສ່ປຸ່ມ WWAN AutoConfig Service ແລະເລືອກເອົາ ເລີ່ມຕົ້ນ.
Method 4: Update Network Adapter Drivers
1. Press Windows key + R and type “devmgmtmsc” in Run dialogue box to open ຕົວຈັດການອຸປະກອນ.
2. ຂະຫຍາຍ ອະແດບເຕີເຄືອຂ່າຍ, ຈາກນັ້ນຄລິກຂວາໃສ່ຂອງທ່ານ ຕົວຄວບຄຸມ Wi-Fi (ຕົວຢ່າງ Broadcom ຫຼື Intel) ແລະເລືອກ ປັບປຸງໂປແກຼມ driver driver.
3. ໃນປັດຈຸບັນເລືອກ “Search for automatically for updated driver software".
4. ດຽວນີ້ Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. Once finished, close everything and reboot your PC.
6. If you’re still facing the Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select ອັບເດດໄດເວີ ໃນ Device Manager.
7. Now, in the Update Driver Software Windows, select “ຄົ້ນຫາຄອມພິວເຕີຂອງຂ້ອຍສໍາລັບຊອບແວທີ່ຂັບຂີ່."
8. ໃນປັດຈຸບັນເລືອກ “ໃຫ້ຂ້ອຍເລືອກເອົາຈາກບັນຊີລາຍຊື່ຂອງໄດເວີທີ່ມີຢູ່ໃນຄອມພິວເຕີຂອງຂ້ອຍ."
9. ພະຍາຍາມ update drivers from the listed versions (make sure to checkmark compatible hardware).
10. If the above didn’t work then go to the manufacturer’s website ເພື່ອປັບປຸງຄົນຂັບລົດ.
11. Download and install the latest driver from the manufacturer’s website then restart your PC.
Method 5: Uninstall Network Adapter Drivers
1. ກົດ Windows Key + R ຈາກນັ້ນພິມ “devmgmtmsc” ແລະກົດ Enter ເພື່ອເປີດ Device Manager.
2. ຂະຫຍາຍ Network Adapters ແລະຊອກຫາ ຊື່ອະແດບເຕີເຄືອຂ່າຍຂອງທ່ານ.
3. ໃຫ້ແນ່ໃຈວ່າທ່ານ ບັນທຶກຊື່ອະແດບເຕີ ພຽງແຕ່ໃນກໍລະນີບາງສິ່ງບາງຢ່າງທີ່ຜິດພາດ.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation ເລືອກແມ່ນແລ້ວ.
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on ການປະຕິບັດ ຫຼັງຈາກນັ້ນ, ໃຫ້ຄລິກໃສ່ "ສະແກນສໍາລັບການປ່ຽນແປງຮາດແວ".
ວິທີທີ 6: ໃຫ້ແນ່ໃຈວ່າ Windows ອັບເດດແລ້ວ
1 ກົດປຸ່ມ Windows Key+ I to open Settings then click on ປັບປຸງແລະຄວາມປອດໄພ.
2. From the left-hand side, menu click on Windows Update.
3. Now click on the “ກວດສອບການປັບປຸງ” button to check for any available updates.
4. If any updates are pending then click on Download & Install updates.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
ວິທີທີ່ 7: ດໍາເນີນການແກ້ໄຂບັນຫາອະແດບເຕີເຄືອຂ່າຍ
1. ກົດ Windows Key + I ເພື່ອເປີດ Settings ຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ ປັບປຸງແລະຄວາມປອດໄພ.
2. From the left-hand menu select ແກ້ໄຂບັນຫາ.
3. Under Troubleshoot click on ການເຊື່ອມຕໍ່ອິນເຕີເນັດ ແລະຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ ດໍາເນີນການແກ້ໄຂບັນຫາ.
4. ປະຕິບັດຕາມຄໍາແນະນໍາໃນຫນ້າຈໍເພີ່ມເຕີມເພື່ອດໍາເນີນການແກ້ໄຂບັນຫາ.
5. If the above didn’t fix the issue then from the Troubleshoot window, click on ຜູ້ດັດແປງເຄືອຂ່າຍ ແລະຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ ດໍາເນີນການແກ້ໄຂບັນຫາ.
5. Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງແລະເບິ່ງວ່າທ່ານສາມາດ fix the Network Adapter Missing issue.
Method 8: Install Intel PROSet/Wireless Software
Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to fix Network Adapter Missing in Windows 10 issue. ສະນັ້ນ, ໄປທີ່ນີ້ and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Hence, read How to Update Network Adapter Drivers on Windows 10.
ວິທີທີ 9: ຣີເຊັດການເຊື່ອມຕໍ່ເຄືອຂ່າຍ
1. ກົດ Windows Key + I ເພື່ອເປີດ Settings ຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ ເຄືອຂ່າຍແລະອິນເຕີເນັດ.
2. From the left-hand menu select ສະຖານະພາບ.
3. Now scroll down and click on ການຕັ້ງຄ່າເຄືອຂ່າຍ ຢູ່ທາງລຸ່ມ.
4. ກົດປຸ່ມ“ ອີກເທື່ອ ໜຶ່ງ”ຕັ້ງຄ່າ ໃໝ່ ດຽວນີ້” under Network reset section.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
ວິທີການ 10: ດໍາເນີນການຟື້ນຟູລະບົບ
System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. ກົດ Windows Key + X ຈາກນັ້ນເລືອກ Command Prompt (Admin).
2. ພິມຄໍາສັ່ງຕໍ່ໄປນີ້ໃສ່ cmd ແລ້ວກົດ Enter:
netcfg –s n
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg ລົບ HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
ສຸດທິ netcfg -v -u dni_dne
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. ກົດ Windows Key + R ແລ້ວພິມ regedit ແລະກົດ Enter.
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type ສຸດທິ netcfg -v -u dni_dne command in cmd.
10. Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງ.
ແນະນໍາສໍາລັບທ່ານ:
ນັ້ນແມ່ນທ່ານໄດ້ສໍາເລັດຜົນ Fix Network Adapter Missing in Windows 10 ແຕ່ຖ້າທ່ານຍັງມີຄໍາຖາມໃດໆກ່ຽວກັບຂໍ້ຄວາມນີ້, ກະລຸນາຖາມພວກເຂົາຢູ່ໃນສ່ວນຄໍາເຫັນ.