Wyze camera is a popular smart home camera that comes with varieties of features. You can get a wired as well as wireless cameras for security, indoor or outdoor use from Wyze. However, there are also few errors that may occur while using the camera. One of such is Wyze error code 90. We bring to you a perfect guide that will teach you how to fix Wyze camera error. So, continue reading!
How to Fix Wyze Camera Error Code 90
Wyze camera offers various features like color night vision, indoor and outdoor capturing with weather resistance feature, personal detection and many more. But there are also a few common error codes that may occur while using the camera. One of such is Wyze cam connection failed error code 90. Here, we have listed the possible troubleshooting methods to fix this camera error.
ວິທີ 1: ແກ້ໄຂບັນຫາການເຊື່ອມຕໍ່ອິນເຕີເນັດ
Wyze error code 90 may mainly due to improper internet connection. So, try to modify the network settings. Wyze camera normally support 2.4 GHz bandwidth, not 5 GHz. Also, your network should be secured with WPA/WPA2 protocol. And, make sure that your WiFi mode is set to 802.11 b / g / n. Read our ultimate smartphone troubleshooting guide, then follow the steps in the method to troubleshoot network connectivity.
Method 2: Power Cycle Wyze Camera
If there is no issue with your internet connection, then check if the hardware connection is good. Also, you can try to power cycle Wyze camera to fix Wyze error code 90 issue as shown in the steps below.
1. ເອົາອອກ Wyze Camera ຈາກເຕົ້າຮັບ.
2. ລໍຖ້າສອງສາມນາທີ.
3. ຈາກນັ້ນ, re-plug the Camera.
4. ດຽວນີ້, turn on the Camera.
ຍັງອ່ານ: Fix Wyze Error Code 06 on Android
Method 3: Re-add Camera in Wyze App
Next method to fix Wyze error code 90 is to re-add the connected camera in the Wyze app. Follow these steps to do so.
1. ເປີດ Wyze app.
2. Select the connected device.
3. ທີ່ນີ້, ແຕະໃສ່ ລຶບອຸປະກອນ ທາງເລືອກ.
4. After removing the device, launch the Wyze app again and tap on the ອຸປະກອນໃໝ່ ປຸ່ມ.
5. ແຕະກ່ຽວກັບ ກ້ອງຖ່າຍຮູບ tab ໃນ ປະເພດ ສ່ວນ.
6. ແຕະກ່ຽວກັບ ປະເພດກ້ອງ ທ່ານຕ້ອງການເພີ່ມ.
ຫມາຍເຫດ: ໄດ້ ສະຖານີ Wyze Base ກ້ອງຖ່າຍຮູບໄດ້ຖືກເລືອກຕົວຢ່າງ.
7. ແຕະກ່ຽວກັບ ຖັດໄປ ປຸ່ມເພື່ອເຊື່ອມຕໍ່ມືຖືຂອງທ່ານກັບເຄືອຂ່າຍ Wyze Camera.
8. ຫຼັງຈາກ ແສງສີຟ້າ ແມ່ນ flashed ສຸດ router ແລະສະຖານີຖານ, ແຕະທີ່ ຖັດໄປ ປຸ່ມເພື່ອສຽບໃສ່ສະຖານີ.
ວິທີທີ 4: ອັບເດດແອັບ Wyze
If your Wyze app is outdated, then you may face Wyze camera error code 90. So, to fix this problem follow the steps listed below to update the Wyze app.
1. ເປີດ ຮ້ານຫຼິ້ນກູໂກ ຈາກເມນູໂທລະສັບ.
2. ໃນແຖບຄົ້ນຫາ, ພິມ Wyze.
3. ສະຖານທີ່ແລະແຕະທີ່ app ຈາກຜົນການຄົ້ນຫາ.
4. ແຕະກ່ຽວກັບ ການປັບປຸງ ປຸ່ມເພື່ອຕິດຕັ້ງການອັບເດດຫຼ້າສຸດ.
5. ລໍຖ້າສໍາລັບການປັບປຸງການຕິດຕັ້ງແລະ ເປີດ ໃໝ່ app ໄດ້.
Check if Wyze cam connection failed issue still persists or not.
ຍັງອ່ານ: ແກ້ໄຂຂໍ້ຜິດພາດຂອງ Google Play Store ການກວດສອບການອັບເດດ
ວິທີ 5: ອັບເດດເຟີມແວກ້ອງຖ່າຍຮູບ
If updating the Wyze app did not fix camera error. Follow the steps given below to solve Wyze error code 90 issue.
1. ເປີດຕົວ Wyze app from the app menu.
2. ທ່ອງໄປຫາ ບັນຊີຂອງຂ້ອຍ ເມນູໃນແອັບ Wyze.
3. ແຕະກ່ຽວກັບ Firmware Update tab
4. ເລືອກສະເພາະ ກ້ອງຖ່າຍຮູບ ເພື່ອອັບເດດເຟີມແວຂອງມັນ.
ຫມາຍເຫດ: ທ່ານສາມາດແຕະທີ່ທາງເລືອກ ປັບປຸງທັງ ໝົດ ປຸ່ມເພື່ອອັບເດດກ້ອງໃນເຄືອຂ່າຍ.
Method 6: Reset Wyze Camera
If the Wyze cameras aren’t properly configured with the application, then it can cause Wyze error code 90 problem. You can fix this issue by resetting the Wyze camera.
1. Remove the SD card from Wyze camera.
2. Then, manually press the ຕັ້ງຄ່າ ກົດປຸ່ມຢູ່ໃນກ້ອງຖ່າຍຮູບແລະລໍຖ້າໃຫ້ໄຟ LED ສີເຫຼືອງປິດ.
ໃຫ້ສັງເກດ 1: ຖ້າໄຟ LED ກະພິບເປັນສີເຫຼືອງ, ມັນຫມາຍຄວາມວ່າກ້ອງຖ່າຍຮູບ Wyze ຖືກຕັ້ງຄືນເປັນການຕັ້ງຄ່າເລີ່ມຕົ້ນ.
ໃຫ້ສັງເກດ 2: ຖ້າແສງສະຫວ່າງບໍ່ມີການປ່ຽນແປງຫຼັງຈາກສອງສາມວິນາທີ, ທ່ານຕ້ອງຕິດຕໍ່ກັບສູນບໍລິການເພື່ອແກ້ໄຂບັນຫາໃນອຸປະກອນຮາດແວ.
3. Now, connect your device and check if it fixes Wyze cam connection failed issue.
ຍັງໄດ້ອ່ານ: ແກ້ໄຂ Google Play Authentication ແມ່ນຕ້ອງການຄວາມຜິດພາດໃນ Android
ວິທີທີ 7: ຕິດຕັ້ງແອັບ Wyze ຄືນໃໝ່
If the issue is with the Wyze app, you can try reinstalling the app on device to fix camera error. Here are the steps to do so.
1. ເປີດ Play Store app
2. ໃນປັດຈຸບັນ, ປາດກ່ຽວກັບ ຂໍ້ມູນ ຮູບສັນຍາລັກຢູ່ແຈຂວາເທິງ.
3. ຈາກນັ້ນ, ເລືອກ ຈັດການແອັບແລະອຸປະກອນ.
4. ຍ້າຍໄປທີ່ ການຄຸ້ມຄອງ ແຖບ, ໝາຍຕິກ Wyze app, ແລະແຕະທີ່ ກະຕ່າຂີ້ເຫຍື້ອ ໄອຄອນຢູ່ເທິງສຸດ.
5. ແຕະກ່ຽວກັບ ຖອນການຕິດຕັ້ງ ກົດປຸ່ມຢູ່ໃນປ່ອງຢ້ຽມການຢືນຢັນແລະລໍຖ້າຈົນກ່ວາ app ໄດ້ຖືກຖອນການຕິດຕັ້ງ.
6. Then, tap on the search bar on the home screen, search for the Wyze app, ແລະແຕະທີ່ ຄົ້ນຫາ icon
7. ແຕະກ່ຽວກັບ ຕິດຕັ້ງ ກົດປຸ່ມເພື່ອຕິດຕັ້ງແອັບຯ Wyze ແລະລໍຖ້າຈົນກ່ວາຂະບວນການຕິດຕັ້ງສໍາເລັດ.
Method 8: Reflash Camera Firmware
If the above methods do not fix camera error, then reflash camera firmware by following the steps below to fix Wyze error code 90 problem.
1. ເອົາອອກ SD card from Camera and connect it in your PC.
2. ຈາກນັ້ນ, ໄປຫາ PC ນີ້ folder and right-click on the SD card, ເລືອກເອົາ ຮູບແບບ... ທາງເລືອກ.
3. After formatting the SD card, visit Wyze released firmware page.
4. ດາວໂຫລດ ເຟີມແວ from the page.
5. Rename the downloaded file as demo.bin.
ຫມາຍເຫດ: ປ່ຽນຊື່ໄຟລ໌ເປັນ demo_wcv3.bin if you have Wyze version 3 camera.
6. Copy the file in the SD card folder.
7. ດຽວນີ້, ໃສ່ SD card in the Wyze camera and turn on the device.
8. Next, hold the select/reset button in Wyze camera until lights turns purple.
9. Finally, release the button and wait for 3-4 minutes to initiate flashing process.
ຍັງອ່ານ: ແກ້ໄຂການໂອນໄຟລ໌ USB Android ບໍ່ເຮັດວຽກຢູ່ໃນ Windows 10
ວິທີການ 9: ຕິດຕໍ່ສະຫນັບສະຫນູນ Wyze
Lastly, try contacting Wyze Support to fix Wyze camera error code 90 as shown below.
1. ເປີດ Wyze app
2. ຢູ່ແຈລຸ່ມຂວາ, ແຕະໃສ່ ບັນຊີຂອງຂ້ອຍ tab
3. ແຕະກ່ຽວກັບ Wyze ສະຫນັບສະຫນູນ.
4. ແຕະກ່ຽວກັບ ສົ່ງບັນທຶກ.
5 ແຕະເທິງ Wyze App & ບໍລິການ.
6. ແຕະກ່ຽວກັບ ກິດຈະກໍາ tab
7 ເລືອກເອົາ ໄຟລ໌ສື່ມວນຊົນ ໃນ ລາຍລະອຽດ ພາກສ່ວນແລະແຕະໃສ່ ຍື່ນສະເຫນີ ປຸ່ມ.
Hence, these are the steps to solve Wyze cam connection failed problem.
ແນະນໍາໃຫ້:
ພວກເຮົາຫວັງວ່າຄູ່ມືນີ້ເປັນປະໂຫຍດສໍາລັບທ່ານແລະທ່ານສາມາດແກ້ໄຂໄດ້ Wyze camera error code 90. Let us know which method worked for you. If you have any suggestions for us, please let us know in the comment section.