Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Būtinai sukurkite atkūrimo tašką, jei kas nors nutiktų.
1 būdas: laikinai išjunkite antivirusinę ir ugniasienę
1. Dešiniuoju pelės mygtuku spustelėkite Antivirusinės programos piktograma iš sistemos dėklo ir pasirinkite Išjungti.
2. Tada pasirinkite laikotarpį, kuriam Antivirusinė programa liks išjungta.
Pastaba: pasirinkite mažiausią įmanomą laiką, pavyzdžiui, 15 minučių arba 30 minučių.
3.Once done, again check if the error resolves or not.
4.Paspauskite Windows Key + I, tada pasirinkite Valdymo skydas.
5. Toliau spustelėkite Sistema ir apsauga.
6. Tada spustelėkite Windows ugniasienė.
7. Dabar kairiojoje lango srityje spustelėkite Įjungti arba išjungti Windows ugniasienę.
8.Pasirinkite Išjungti Windows ugniasienę ir iš naujo paleiskite kompiuterį. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Jei aukščiau pateiktas metodas neveikia, būtinai atlikite tuos pačius veiksmus, kad vėl įjungtumėte ugniasienę.
Method 2: Delete Hidden Network Adapters
1. Paspauskite „Windows“ klavišą + R, tada įveskite devmgmt.msc ir paspauskite Enter, kad atidarytumėte Įrenginių tvarkytuvė.
2. Dabar pasirinkite Tinklo adapteriai tada spustelėkite Rodinys> Rodyti paslėptus įrenginius.
3.Right-click on each of the hidden devices and select Pašalinkite įrenginį.
4.Do this for all the hidden devices listed under Network Adapters.
5. Iš naujo paleiskite kompiuterį, kad išsaugotumėte pakeitimus.
Method 3: Turn ON Network Discovery
1. Paspauskite „Windows“ klavišą + X, tada pasirinkite Valdymo skydas.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings iš kairiojo meniu.
4.Check mark Įjunkite tinklo aptikimą and click Save changes.
5. Iš naujo paleiskite kompiuterį, kad išsaugotumėte pakeitimus ir patikrintumėte, ar galite tai padaryti Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. Paspauskite „Windows“ klavišą + R, tada įveskite ncpa.cpl ir paspauskite "Enter".
2.Right-click on your active Wi-Fi or ethernet connection and select Savybės
3. Pasirinkite Versija 4 Interneto protokolas (TCP / IPv4) ir spustelėkite Ypatybės.
4. Dabar spustelėkite pažangus in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Įgalinti „NetBIOS“ per TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. Paspauskite „Windows“ klavišą + X, tada pasirinkite Valdymo skydas.
2. Tipas Įgaliojimai in the control panel search and click on Kredencialų tvarkytojas.
3. Pasirinkite „Windows“ kredencialai tada spustelėkite Add a Windows credential.
4.One by one type the vartotojo vardas ir slaptažodis of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Savybės
2. Perjunkite į Skirtuko bendrinimas and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “Bendrinti šį aplanką” and make sure the Share name is correct.
4.Spustelėkite Taikyti ir Gerai.
Method 7: Change Network Security settings
1. Paspauskite „Windows“ klavišą + R, tada įveskite secpol.msc ir paspauskite "Enter".
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. Dukart spustelėkite Network security: LAN Manager authentication level in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5.Spustelėkite Taikyti ir Gerai.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
8 metodas: iš naujo nustatykite TCP / IP
1. Dešiniuoju pelės mygtuku spustelėkite „Windows“ mygtuką ir pasirinkite „Komandinė eilutė (administratorius)."
2. Dabar įveskite šią komandą ir po kiekvienos paspauskite enter:
a) ipconfig / release
b) ipconfig /flushdns
(c) ipconfig /renew
3. Dar kartą atidarykite administratoriaus komandų eilutę ir įveskite toliau pateiktą informaciją ir po kiekvieno iš jų paspauskite Enter:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip reset
- Netsh Winsock atstatymas
4. Paleiskite iš naujo, kad pritaikytumėte pakeitimus.
Rekomenduota jums:
Tai tau pavyko Fix Error code 0x80070035 The network path was not found bet jei vis dar turite klausimų dėl šio įrašo, nedvejodami užduokite juos komentarų skiltyje.