When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Pasenusi operacinė sistema.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe piktogramą.
2. If the status is set to Neprisijungęs, spustelėkite ant Network globe icon, choose your Wi-Fi network and click on prisijungti button. Make sure Lėktuvo rėžimas nėra įjungtas.
3. If you again face the same network connection error code, then click on the Atjunkite button, wait for some time and reconnect it again.
4. Try connecting to a different "Wi-Fi" network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Dešiniuoju pelės mygtuku spustelėkite "Wi-Fi" piktograma ir pasirinkite Open Network & Internet settings.
6. Spauskite ant "Wi-Fi".
7. Scroll down the right menu, click on Valdykite žinomus tinklus.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Pamiršk.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
2 būdas: iš naujo paleiskite maršrutizatorių
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Pastaba: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Raskite Maitinimo mygtukas maršrutizatoriaus gale.
2. Paspauskite mygtuką vieną kartą, kad Išjunk.
3. Dabar, atjungti jusu Router power cable ir palaukite, kol maitinimas visiškai išeis iš kondensatorių.
4. Tada vėl As maitinimo kabelis ir po minutės įjunkite.
5. Palaukite, kol bus atkurtas tinklo ryšys ir pabandykite prisijungti dar kartą.
Taip pat perskaitykite: Fix Computers Not Showing Up on Network in Windows 10
3 metodas: paleiskite tinklo trikčių šalinimo įrankį
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Paspauskite Windows Key ir tipas Šalinkite nustatymus paieškos juostoje ir Atidaryti.
2. Spauskite ant Papildomi trikčių šalinimo įrankiai.
3. pasirinkti Tinklo adapteris ir spauskite Paleiskite trikčių šalinimo įrankį.
4. Select the network adapter to diagnose ir spauskite Sekantis.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, spustelėkite Uždarykite trikčių šalinimo įrankį.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Taip pat perskaitykite: Pataisykite, kad „YouTube TV“ bendrinimas su šeima neveikia
4 būdas: taisykite sistemos failus
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistemos rinkmenų tikrintuvą) /DISM (Diegimo vaizdo aptarnavimas ir valdymas) utilities on your Windows 10 PC.
1. Paspauskite Windows Key, įveskite Komandinė eilutė ir spauskite Vykdyti kaip administratorius.
2. Spauskite ant taip viduje Vartotojo abonemento valdymo tarnyba greitai.
3. Įveskite chkdsk C: / f / r / x komandą ir paspauskite Įveskite klavišą.
4. Jei būsite paraginti pateikti pranešimą, Chkdsk negali paleisti… tomas… naudojamas, tada įveskite Y ir paspauskite Įveskite klavišą.
5. Dar kartą įveskite komandą: SFC / scannow ir paspauskite Įveskite klavišą paleisti Sistemos rinkmenų tikrintuvą nuskaityti.
Pastaba: Bus pradėtas sistemos nuskaitymas ir tai užtruks kelias minutes. Tuo tarpu galite tęsti kitą veiklą, tačiau nepamirškite netyčia neuždaryti lango.
Užbaigus nuskaitymą, bus rodomas vienas iš šių pranešimų:
- „Windows“ išteklių apsauga nerado jokių vientisumo pažeidimų.
- „Windows“ išteklių apsauga negalėjo atlikti prašomos operacijos.
- „Windows Resource Protection“ rado sugadintus failus ir sėkmingai juos pataisė.
- „Windows Resource Protection“ aptiko sugadintus failus, tačiau kai kurių iš jų nepavyko pataisyti.
6. Kai nuskaitymas baigtas, restartas jūsų kompiuteris.
7. Vėl paleiskite Komandų eilutė kaip administratorius ir vieną po kitos vykdykite pateiktas komandas:
dism.exe /Prisijungę /cleanup-image /scanhealth dism.exe /Prisijungęs /cleanup-image /restorehealth dism.exe /Prisijungę /cleanup-image /startcomponentcleanup
Pastaba: Kad tinkamai vykdytumėte DISM komandas, turite turėti veikiantį interneto ryšį.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Paspauskite Windows Key ir tipas Device Manager " in the Windows search menu. Click on Atviras.
2. Išplėskite Tinklo adapteriai skyrių dukart spustelėdami jį.
3. Dešiniuoju pelės mygtuku spustelėkite savo Tinklo tvarkyklė (pavyzdžiui, Intel (R) Dual Band Wireless-AC 3168) Ir pasirinkite Išjunkite įrenginį pasirinkimas.
4. Confirm the below prompt by clicking on taip.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Įgalinti įrenginį pasirinkimas.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Taip pat perskaitykite: Pataisyti Windows negalėjo automatiškai aptikti šio tinklo tarpinio serverio nustatymų
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Eikite į paieškos meniu ir įveskite Cmd. Spauskite ant Vykdyti kaip administratorius.
2. Įveskite toliau pateiktą informaciją komandos ir paspauskite Įveskite klavišą.
Netsh Winsock atstatymas netsh int ip reset ipconfig / spaudai ipconfig / renew
3. Palaukite, kol komandos bus įvykdytos ir perkraukite savo kompiuterį.
7 būdas: išvalykite DNS talpyklą
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Paleisti Komandinė eilutė by searching in the Windows meniu and click on Run as administrator.
2. Įveskite ipconfig / flushdns in the command window and hit įeiti.
Taip pat perskaitykite: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Paleiskite paleisti dialogo langą paspausdami Windows + R klavišai kartu.
2. Įveskite ncpa.cpl ir paspauskite Įveskite klavišą.
3. Right-click on your active Tinklo adapteris ir spauskite Skelbimų.
4. Atžymėkite 6 interneto protokolo versija (TCP / IPv6) pasirinkimas.
5. Galiausiai spustelėkite OK to save the changes and check if the issue is resolved.
Pastaba: If you use multiple network connections, navigate to Tinklo ir bendrinimo centras ir Pakeiskite adapterį settings. Right-click on the adapter and select išjungti. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Įveskite Device Manager " in the Windows search menu and click Atviras.
2. Double click on the Tinklo adapteriai ją išplėsti.
3. Dešiniuoju pelės mygtuku spustelėkite savo vairuotojas (pvz „Intel(R) Dual Band Wireless-AC 3168) ir spustelėkite Atnaujinti tvarkyklę.
4. Spauskite ant Naršykite mano kompiuteryje, kad rastumėte tvarkyklių Norėdami rankiniu būdu surasti ir įdiegti tvarkyklę.
5. Spustelėkite ant naršyklė button to choose any directory and click on Sekantis.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Geriausios jūsų įrenginio tvarkyklės jau įdiegtos.
6. Spauskite ant arti išeiti iš lango.
7. Iš naujo the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Paleisti Device Manager " from the Windows search menu.
2. Dešiniuoju pelės mygtuku spustelėkite vairuotojas ir pasirinkite Pašalinkite įrenginį.
3. A warning prompt will be displayed on the screen. Check the box “Ištrinkite šio įrenginio tvarkyklės programinę įrangą” and confirm the prompt by clicking Pašalinti.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Apsilankykite gamintojo svetainė.
2. rasti ir parsisiųsti tvarkykles, atitinkančias jūsų kompiuterio „Windows“ versiją.
3. Atsisiuntę dukart spustelėkite atsisiųstas failas and follow the given instructions to install it.
Taip pat perskaitykite: Kaip nustatyti VPN sistemoje „Windows 10“.
10 būdas: atnaujinkite „Windows“.
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Paspauskite Windows + I raktai kartu atidaryti Nustatymai savo kompiuteryje.
2. pasirinkti Atnaujinimas ir sauga.
3. pasirinkti Patikrinkite Atnaujinimai.
4A. Click Diegti dabar norėdami atsisiųsti ir įdiegti naujausią galimą naujinimą.
4B. Jei jūsų sistema jau atnaujinta, ji bus rodoma Jūs esate atnaujintas pranešimas
11 būdas: pašalinkite naujausius naujinimus
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Paspauskite ir palaikykite Windows + R klavišai kartu atidaryti paleisti dialogo langas.
2. Įveskite appwiz.cpl ir paspauskite įeiti.
3. Spauskite ant Peržiūrėti įdiegtus naujinimus.
4. Select the most recent update and click on Pašalinti.
5. Confirm the prompt, if any, and perkraukite kompiuterį.
Taip pat perskaitykite: Kaip pataisyti „Firefox“ neįkeliamus puslapius
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the tinklo adapteriai installed in your PC along with their settings. All the stored settings are stored to default settings.
Pastaba: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Nustatymai tada sistema ir Apie mus. Once you have reset your network, you have to reinstall all networking software kaip VPN klientai or Virtualūs jungikliai.
1. Paspauskite ir palaikykite „Windows + I“ klavišai kartu atidaryti "Windows Nustatymai.
2. Spauskite ant Tinklas ir internetas.
3. Spauskite ant Tinklo atstatymas pagal statusas.
4. Patvirtinkite raginimą spustelėdami Atstatyti dabar.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Rekomenduojama:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.