When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Novecojusi operētājsistēma.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikonu.
2. If the status is set to Nav savienots, noklikšķiniet uz Network globe icon, choose your Wi-Fi network and click on Meklēt speciālistu button. Make sure Lidmašīnas režīms nav ieslēgts.
3. If you again face the same network connection error code, then click on the Atvienot button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Ar peles labo pogu noklikšķiniet uz Wi-Fi ikona un izvēlieties Open Network & Internet settings.
6. Noklikšķiniet uz Wi-Fi.
7. Scroll down the right menu, click on Pārvaldiet zināmos tīklus.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Aizmirsti.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
2. metode: restartējiet maršrutētāju
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Piezīme: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Atrodi Power poga at the back of your router.
2. Press the button once to izslēdz to.
3. Tagad, atvienot jūsu Router power cable un pagaidiet, līdz no kondensatoriem tiek pilnībā iztukšota jauda.
4. Tad atjaunot o barošanas kabelis un ieslēdziet to pēc minūtes.
5. Wait until the network connection is re-established and try signing in again.
Arī lasīt: Labojiet datorus, kas netiek rādīti tīklā operētājsistēmā Windows 10
3. metode: palaidiet tīkla problēmu novēršanas rīku
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Noklikšķiniet uz Windows taustiņu un tips Iestatījumu problēmu novēršana meklēšanas joslā un Atvērt.
2. Noklikšķiniet uz Papildu traucējummeklētāji.
3. Izvēlieties Tīkla adapteris un noklikšķiniet uz Palaidiet problēmu novēršanas rīku.
4. Select the network adapter to diagnose un noklikšķiniet uz nākamais.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, klikšķiniet uz Aizveriet problēmu novēršanas rīku.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Arī lasīt: Novērsiet, ka YouTube TV koplietošana ģimenē nedarbojas
4. metode: labojiet sistēmas failus
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Attīstīšanas attēlu apkalpošana un vadīšana) utilities on your Windows 10 PC.
1. Noklikšķiniet uz Windows taustiņu, ierakstiet Command Prompt un noklikšķiniet uz Palaist kā administratoram.
2. Noklikšķiniet uz Jā iekš Lietotāja konta kontrole ātri.
3. Tips chkdsk C: / f / r / x komandu un sit Ievadiet taustiņu.
4. Ja tiek prasīts nosūtīt ziņojumu, Chkdsk nevar palaist… sējums ir… lietošanas procesā, pēc tam ierakstiet Y un nospiediet Ievadiet taustiņu.
5. Vēlreiz ierakstiet komandu: PMK / scannow un nospiediet Ievadiet taustiņu lai palaistu System File Checker skenēt.
Piezīme: Tiks uzsākta sistēmas skenēšana, un tās pabeigšana prasīs dažas minūtes. Tikmēr varat turpināt veikt citas darbības, taču uzmanieties, lai nejauši neaizvertu logu.
Pēc skenēšanas tiks parādīts kāds no šiem ziņojumiem:
- Windows resursu aizsardzība neatrada nekādus integritātes pārkāpumus.
- Windows resursu aizsardzība nevarēja veikt pieprasīto darbību.
- Windows resursu aizsardzība atrada bojātus failus un veiksmīgi tos salaboja.
- Windows resursu aizsardzība atrada bojātus failus, taču dažus no tiem nevarēja labot.
6. Kad skenēšana ir pabeigta, restart jūsu datoram.
7. Atkal palaidiet Komandu uzvedne kā administrators un izpildiet dotās komandas vienu pēc otras:
dism.exe /Tiešsaiste /cleanup-image /scanhealth dism.exe /Tiešsaiste /cleanup-image /restorehealth dism.exe /Tiešsaiste /cleanup-image /startcomponentcleanup
Piezīme: Lai pareizi izpildītu DISM komandas, ir jābūt strādājošam interneta savienojumam.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
5. metode: atkārtoti iespējojiet tīkla adapteri
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Noklikšķiniet uz Windows taustiņu un tips Device Manager in the Windows search menu. Click on atvērts.
2. Izvērsiet Tīkla adapteri sadaļu, veicot dubultklikšķi uz tās.
3. Ar peles labo pogu noklikšķiniet uz sava Tīkla draiveris (piemēram, Intel (R) Dual Band Wireless-AC 3168) Un izvēlieties Atspējot ierīci variants.
4. Confirm the below prompt by clicking on Jā.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Iespējot ierīci variants.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Arī lasīt: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Atveriet meklēšanas izvēlni un ierakstiet cmd. Noklikšķiniet uz Palaist kā administratoram.
2. Ierakstiet tālāk norādīto komandas un nospiediet Ievadiet taustiņu.
Netsh Winsock atiestatīšana netsh int ip reset ipconfig / release ipconfig / atjaunot
3. Pagaidiet, līdz tiks izpildītas komandas un restartējiet datoru.
7. metode: iztīriet DNS kešatmiņu
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Uzsākt Command Prompt by searching in the Windows ēdienkarte and click on Run as administrator.
2. Tips ipconfig / flushdns komandu logā un nospiediet ienākt.
Arī lasīt: [SOLVED] Windows detected a hard disk problem
8. metode: atspējojiet IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Uzsāciet skrējiens dialoglodziņš, nospiežot Windows + R taustiņi kopā.
2. Tips ncpa.cpl un hit Ievadiet taustiņu.
3. Right-click on your active tīkla adapteris un noklikšķiniet uz Rekvizīti.
4. Noņemiet atzīmi no Interneta protokola 6. versija (TCP / IPv6) variants.
5. Visbeidzot noklikšķiniet uz OK to save the changes and check if the issue is resolved.
Piezīme: If you use multiple network connections, navigate to Tīkla un koplietošanas centrs un Mainīt adapteri settings. Right-click on the adapter and select Atslēgt. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tips Device Manager in the Windows search menu and click atvērts.
2. Double click on the Tīkla adapteri lai to paplašinātu.
3. Ar peles labo pogu noklikšķiniet uz sava vadītājs (piemēram, Intel® Dual Band Wireless-AC 3168) un noklikšķiniet Atjaunināt draiveri.
4. Noklikšķiniet uz Pārlūkojiet manu datoru, lai atrastu draiverus to locate and install a driver manually.
5. Noklikšķiniet uz pārlūks button to choose any directory and click on nākamais.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Ja tie jau ir atjaunināšanas stadijā, ekrānā tiek parādīts šāds ziņojums: Labākie ierīces draiveri jau ir instalēti.
6. Noklikšķiniet uz aizvērt iziet no loga.
7. Restarts the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Uzsākt Device Manager from the Windows search menu.
2. Ar peles labo pogu noklikšķiniet uz vadītājs un izvēlieties Atinstalējiet ierīci.
3. A warning prompt will be displayed on the screen. Check the box “Dzēsiet šīs ierīces draivera programmatūru” and confirm the prompt by clicking Atinstalēt.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Apmeklējiet ražotāja tīmekļa vietne.
2. atrast un Download draiveri, kas atbilst jūsu datora Windows versijai.
3. Once downloaded, double click on the lejupielādētais fails un izpildiet sniegtos norādījumus, lai to instalētu.
Arī lasīt: Kā iestatīt VPN operētājsistēmā Windows 10
10. metode: atjauniniet Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Nospiediet Logi + I atslēgas kopā, lai atvērtu Settings datorā.
2. Izvēlieties Atjaunināšana un drošība.
3. Izvēlieties Pārbaudīt, vai nav atjauninājumu.
4A. Click Instalēt tagad to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Jūs esat lietas kursā ziņa
11. metode: atinstalējiet jaunākos atjauninājumus
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Nospiediet un turiet Windows + R taustiņi kopā, lai atvērtu skrējiens dialoglodziņš.
2. Tips appwiz.cpl un hit ienākt.
3. Noklikšķiniet uz Skatīt uzstādīti atjauninājumi.
4. Select the most recent update and click on Atinstalēt.
5. Confirm the prompt, if any, and restartējiet datoru.
Arī lasīt: Kā novērst Firefox neielādētās lapas
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the tīkla adapteri installed in your PC along with their settings. All the stored settings are stored to default settings.
Piezīme: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Settings tAD sistēma un Par mums. Once you have reset your network, you have to reinstall all networking software tāpat VPN klienti or Virtuālie slēdži.
1. Nospiediet un turiet Windows + I taustiņi kopā, lai atvērtu Windows iestatījumi.
2. Noklikšķiniet uz Tīkls un internets.
3. Noklikšķiniet uz Tīkla atiestatīšana zem Status.
4. Apstipriniet uzvedni, noklikšķinot uz Atiestatīt tūlīt.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Ieteicams:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.