When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Rafitra fandidiana efa lany andro.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe kisary.
2. If the status is set to Tsy mifandray, tsindrio ny Network globe icon, choose your Wi-Fi network and click on Connect button. Make sure Toetran'ny fiaramanidina dia tsy mandeha.
3. If you again face the same network connection error code, then click on the elektrônika button, wait for some time and reconnect it again.
4. Try connecting to a different Wifi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Kitiho havanana amin'ny Ikona Wi-Fi ary hifantina Open Network & Internet settings.
6. Click on Wifi.
7. Scroll down the right menu, click on Hikarakara tambajotra fantatra.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Manadino.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Fomba 2: Avereno indray ny router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Fanamarihana: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Tadiavo ny Power button ao ambadiky ny router-nao.
2. Tsindrio ny bokotra indray mandeha vonoy io.
3. Ankehitriny, elektrônika ny Router power cable ary miandrasa mandra-pahalefany tanteraka ny herin'ny capacitors.
4. Avy eo, mifandray indray ny tariby herinaratra ary avereno izany rehefa afaka iray minitra.
5. Andraso mandra-pahatongan'ny fifandraisana amin'ny tambajotra ary andramo miditra indray.
Vakio ihany koa: Fix Computers Not Showing Up on Network in Windows 10
Fomba 3: Mihazakazaha troubleshooter amin'ny tambajotra
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Tsindrio ny Windows key and type Famaha olana ao amin'ny bara fikarohana ary Open.
2. Click on Fikoranana fanampiny.
3. Select Network Adapter ary tsindrio eo amin'ny Atsaharo ny mpitsikilo.
4. Select the network adapter to diagnose ary tsindrio eo amin'ny Manaraka.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, tsindrio Akatona ny mpanenjika.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Vakio ihany koa: Amboary ny Fizarana Fianakaviana YouTube TV Tsy mandeha
Fomba 4: Repair System Files
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Fametrahana sary fanompoana sy fitantanana) utilities on your Windows 10 PC.
1. Tsindrio ny Windows key, karazana Command haingana ary tsindrio eo amin'ny Manaova toy ny mpandrindra.
2. Click on Eny ao amin'ny Fanaraha-maso ny kaonty mpampiasa avy hatrany.
3. Type chkdsk C: / f / r / x baiko ary mamely Ampidiro ny lakile.
4. Raha asaina mandefa hafatra ianao, Tsy afaka mandeha ny Chkdsk…eo am-piasana ny volume, avy eo, karazana Y and hit the Ampidiro ny lakile.
5. Avereno soraty ny baiko: sfc / scannow sy ny asa fanaovan-gazety Ampidiro ny lakile mihazakazaka ny System File Checker scan.
Fanamarihana: Hatomboka ny fitarafana rafitra ary haharitra minitra vitsy vao vita. Mandritra izany fotoana izany, afaka manohy manao hetsika hafa ianao fa mitandrema fa tsy manidy tampoka ny varavarankely.
Rehefa vita ny scan dia hiseho ny iray amin'ireto hafatra ireto:
- Windows Resource Protection dia tsy nahita fanitsakitsahana tsy fivadihana.
- Windows Resource Protection dia tsy afaka nanatanteraka ilay asa nangatahana.
- Nahita rakitra simba ny Windows Resource Protection ary nanamboatra azy ireo soa aman-tsara.
- Nahita rakitra simba ny Windows Resource Protection saingy tsy afaka nanamboatra ny sasany tamin'izy ireo.
6. Rehefa vita ny scan, haverina velomina ny PC.
7. Avereno indray Fanomezana baiko ho mpitantana ary tanteraho ny baiko nomena:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Fanamarihana: Tsy maintsy manana fifandraisana Internet miasa ianao mba hanatanterahana tsara ny baiko DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Tsindrio ny Windows key and type Mpitantana Fitaovana in the Windows search menu. Click on Open.
2. Ampitomboy ny Adapter Network section by double-clicking on it.
3. Tsindrio havanana amin'ny anao mpamily tambajotra (ohatra, Intel (R) Dual Band Wireless-AC 3168) ary mifidiana ny Disable fitaovana safidy.
4. Confirm the below prompt by clicking on Eny.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Ampidiro ny fitaovana safidy.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Vakio ihany koa: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. tsindrio eo amin'ny Manaova toy ny mpandrindra.
2. Soraty ireto manaraka ireto didy and hit the Ampidiro ny lakile.
Netsh winsock reset netsh int ip reset ipconfig / release ipconfig / fanavaozana
3. Andraso ny baiko ho tanterahina ary avereno ny PC-nao.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. fandefasana Command haingana by searching in the Windows sakafo and click on Run as administrator.
2. Type ipconfig / flushdns in the command window and hit Midira.
Vakio ihany koa: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Mandrosoa ny Run boaty fifanakalozan-kevitra amin'ny fanindriana Kitendry Windows + R miaraka.
2. Type ncpa.cpl and hit Ampidiro ny lakile.
3. Right-click on your active adaptatera tambajotra ary tsindrio eo amin'ny Properties.
4. Esory ny marika ny Internet Protocol Version 6 (TCP / IPv6) safidy.
5. Farany, tsindrio ny OK to save the changes and check if the issue is resolved.
Fanamarihana: If you use multiple network connections, navigate to Network sy Sharing Center ary Ovay ny adaptatera settings. Right-click on the adapter and select Tsy velomina. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Type Mpitantana Fitaovana in the Windows search menu and click Open.
2. Tsindrio indroa ny Adapter Network hanitatra azy.
3. Tsindrio havanana amin'ny anao mpamily (oh: Intel(R) Dual Band Wireless-AC 3168) ary kitiho Fanavaozana mpamily.
4. Click on Jereo ny solosainako raha misy mpamily to locate and install a driver manually.
5. Tsindrio ny Browser button to choose any directory and click on Manaraka.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Efa napetraka ny mpamily tsara indrindra ho an'ny fitaovanao.
6. Click on akaiky hivoaka ny varavarankely.
7. Haverina velomina the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. fandefasana Mpitantana Fitaovana from the Windows search menu.
2. Kitiho havanana amin'ny mpamily ary hifantina Esory ny fitaovana.
3. A warning prompt will be displayed on the screen. Check the box “Esory ny rindrambaiko mpamily ho an'ity fitaovana ity” and confirm the prompt by clicking esory.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Tsidiho ny tranokalan'ny mpanamboatra.
2. Find ary Download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the rakitra alaina and follow the given instructions to install it.
Vakio ihany koa: How to set up a VPN on Windows 10
Fomba 10: Fanavaozana ny Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Tsindrio ny Windows+I fanalahidy miaraka manokatra Settings ao amin'ny solosainao.
2. Select Fanavaozana sy fiarovana.
3. Select Hijerena ny vaovao farany.
4A. Click Atsaharo izao hisintona sy hametraka ny fanavaozana farany misy.
4B. Raha efa nohavaozina ny rafitrao dia hiseho izany Manaraka ny vaovao ianao hafatra.
Method 11: Uninstall Recent Updates
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Tsindrio ary tazomy Kitendry Windows + R miaraka hanokatra ny Run dinika dialogue.
2. Type appwiz.cpl and hit Midira.
3. Click on Hizaha ny updates farany.
4. Select the most recent update and click on esory.
5. Confirm the prompt, if any, and reboot ny PC.
Vakio ihany koa: Ahoana ny famahana ny Firefox tsy misy pejy
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Fanamarihana: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Settings avy eo System ary About. Once you have reset your network, you have to reinstall all networking software toy ny Mpanjifa VPN or Switches virtoaly.
1. Tsindrio ary tazomy Windows + I fanalahidy miaraka manokatra Windows Settings.
2. Click on Tambajotra sy Internet.
3. Click on Voaro ny tambazotra ambany Status.
4. Hamafiso ny bitsika amin'ny fipihana Reset now.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recommended:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.