When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Pūnaha Whakahaere tawhito.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Kaore i te hono, pāwhiritia te Network globe icon, choose your Wi-Fi network and click on Tūhono button. Make sure Aratau Airplane kāhore i te whakakā
3. If you again face the same network connection error code, then click on the Momotu button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Paato matau-i runga i te Wi-Fi icon ka tīpako Open Network & Internet settings.
6. Pāwhiritia te Wi-Fi.
7. Scroll down the right menu, click on Whakahaerehia nga whatunga rongonui.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Wareware
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Tikanga 2: Tīmata anō i te Pouara
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Tuhipoka: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Rapua te Pātene Power kei muri o to pouara.
2. Pēhia te pātene kotahi ki te peka atu.
3. Na, momotu koutou Router power cable ka tatari kia pau katoa te hiko mai i nga punga.
4. Na, whakahou te taura mana ka whakakā i muri i te meneti.
5. Taria ra ano te hononga whatunga me te ngana ki te takiuru ano.
Ano hoki: Whakatika Rorohiko Kaore e Puta ana ki runga Whatunga i roto Windows 10
Tikanga 3: Whakahaerehia te Raruraru Whakawhiti Whatunga
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Patua te Kī Windows me te momo Tautuhinga raru i te pae rapu me Tuwhera.
2. Pāwhiritia te He raru taapiri.
3. Tīpako Taapiri Huinga ka pāwhiri ai Whakahaerehia te raruraru.
4. Select the network adapter to diagnose ka pāwhiri ai Panuku.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, pāwhiritia Katihia te kaitautoko.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Ano hoki: Whakatikahia te Whakawhiti Whānau YouTube TV Kaore i te Mahi
Tikanga 4: Whakatikahia nga Kōnae Pūnaha
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Pūtirotiro Pūnaha Pūnaha) /DISM (Te Whakahaere Mahinga Atahanga me te Whakahaere) utilities on your Windows 10 PC.
1. Patua te Kī Windows, momo Whakaaetia te Whakatairanga ka pāwhiri ai Whakahaere hei kaiwhakahaere.
2. Pāwhiritia te Āe i roto i te Whakahaere Pūkete Kaiwhakamahi tere.
3. Momo chkdsk C: / f / r / x whakahau me te patu Whakauruhia te matua.
4. Mēnā ka ākina koe e tētahi karere, Kaore e taea e Chkdsk te whakahaere…kei te mahi te rōrahi…, ka, pato Y a ka patua Whakauruhia te matua.
5. Ano, patohia te tono: sfc / scannow me te pēhi Whakauruhia te matua ki te rere i te Pūtirotiro Pūnaha Pūnaha karapa
Tuhipoka: Ka timatahia he matawai punaha, ka roa te meneti hei whakaoti. I tenei wa, ka taea e koe te mahi tonu i etahi atu mahi engari kia mahara kia kaua e kati ohorere te matapihi.
Ka oti te karapa, ka whakaatu i enei karere:
- Kare i kitea e te Parenga Rauemi Matapihi nga takahi i te tika.
- Kāore i taea e te Parenga Rauemi Windows te mahi i tonohia.
- I kitea e te Parenga Rauemi Windows nga konae kua kino, a, i pai te whakatika.
- I kitea e te Parenga Rauemi Windows nga konae kua kino engari kaore i taea te whakatika etahi o aua konae.
6. Kia mutu te karapa, tīmata to PC.
7. Ano, whakarewa Whakaaetia te Whakatairanga hei Kaiwhakahaere mahia nga whakahau i homai tetahi ki tetahi:
dism.exe / Tuihono / whakaahua-maama / scanhealth dism.exe /Ipurangi /whakapaipai-whakaahua /restorehealth dism.exe /Tuihono /whakapaipai-ahua /startcomponentcleanup
Tuhipoka: Me whai hononga ipurangi mahi koe ki te whakahaere tika i nga whakahau DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Patua te Kī Windows me te momo Kaiwhakahaere Pūrere in the Windows search menu. Click on tuwhera.
2. Whakanuia te Whatunga Whatunga section by double-clicking on it.
3. Pāwhiri-matau i runga i to taraiwa whatunga (hei tauira, Intel (R) Dual Band Wireless-AC 3168) ka tīpako i te Monokia te taputapu kōwhiringa.
4. Confirm the below prompt by clicking on Āe.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Whakahohea te pūrere kōwhiringa.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Ano hoki: Whakatika kaore i taea e Windows te kite aunoa i nga tautuhinga Takawaenga o tenei Whatunga
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Pāwhiritia te Whakahaere hei kaiwhakahaere.
2. Patohia nga mea e whai ake nei whakahau a ka patua Whakauruhia te matua.
netsh winsock tautuhi netsh int ip tautuhinga ipconfig / tuku ipconfig / whakahoutanga
3. Tatari kia mahia nga whakahau me te whakaara ano i to PC.
Tikanga 7: Horoi DNS Keteroki
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Whakarewa Whakaaetia te Whakatairanga by searching in the Windows tahua and click on Run as administrator.
2. Momo ipconfig / flushdns in the command window and hit E tomo.
Ano hoki: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Te Tuku i te Whakahaere pouaka kōrero mā te pēhi Nga taviri Windows + R tahi.
2. Momo ncpa.cpl me te patu Whakauruhia te matua.
3. Right-click on your active hononga whatunga ka pāwhiri ai āhuatanga.
4. Wetetaki i te Kawa Ipurangi Putanga 6 (TCP / IPv6) kōwhiringa.
5. Ka mutu, pawhiria OK to save the changes and check if the issue is resolved.
Tuhipoka: If you use multiple network connections, navigate to Whatunga Whatunga me te Whatunga a Hurihia te kaiwhakauru settings. Right-click on the adapter and select Monokia. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Momo Kaiwhakahaere Pūrere in the Windows search menu and click tuwhera.
2. Pawhiri rua i runga i te Whatunga Whatunga ki te whaanui.
3. Pāwhiri-matau i runga i to atekōkiri (hei tauira Intel(R) Roopu Takirua Ahokore-AC 3168) ka paato Whakahōu arataki.
4. Pāwhiritia te Tirotiro taku rorohiko mo nga taraiwa to locate and install a driver manually.
5. Patohia te pūtirotiro button to choose any directory and click on Panuku.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Ko nga taraiwa pai mo to taputapu kua whakauruhia.
6. Pāwhiritia te Katia kia puta ki te matapihi.
7. Tīmata the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Whakarewa Kaiwhakahaere Pūrere from the Windows search menu.
2. Paato matau-i runga i te atekōkiri ka tīpako Pūrere tango.
3. A warning prompt will be displayed on the screen. Check the box “Mukua te pūmanawa atekōkiri mō tēnei pūrere” and confirm the prompt by clicking Wetetāuta.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Tirohia te paetukutuku a te kaiwhakanao.
2. Kimihia a Tikiake nga taraiwa e rite ana ki te putanga Windows i runga i to PC.
3. Once downloaded, double click on the kōnae kua tikiake and follow the given instructions to install it.
Ano hoki: How to set up a VPN on Windows 10
Tikanga 10: Whakahou Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Whakapirihia te Windows + mau taviri tahi ki te whakatuwhera tautuhinga i runga i to rorohiko.
2. Tīpako Whakahou & Haumarutanga.
3. Tīpako Tirohia mo nga Whakahōu.
4A. Click Tāuta ināianei to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Kei runga tonu koe karere.
Tikanga 11: Wetewete i nga Whakahoutanga Hou
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Patohia ka mau Nga taviri Windows + R tahi ki te whakatuwhera i te Whakahaere pouaka korero.
2. Momo appwiz.cpl me te patu E tomo.
3. Pāwhiritia te Tirohia nga whakahōunga kua tautuhia.
4. Select the most recent update and click on Wetetāuta.
5. Confirm the prompt, if any, and whakaara ano i te PC.
Ano hoki: Me pehea te Whakatika i a Firefox kaore e utaina nga wharangi
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Tuhipoka: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to tautuhinga ka pūnaha a Taipitopito. Once you have reset your network, you have to reinstall all networking software rite Kaihoko VPN or Whakawhiti mariko.
1. Patohia ka mau Matapihi + I nga taviri tahi ki te whakatuwhera Tautuhinga Windows.
2. Pāwhiritia te Whatunga me te Ipurangi.
3. Pāwhiritia te Tautuhi whatunga i raro i Tūnga.
4. Whakapumautia te aki ma te panui Tautuhi inaianei.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Manakohia:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.