When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe икона.
2. If the status is set to Не е поврзано, кликнете на Network globe icon, choose your Wi-Fi network and click on Поврзете се button. Make sure Авионски режим не е вклучен.
3. If you again face the same network connection error code, then click on the Прекини button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Десен-клик на Икона за Wi-Fi и одберете Open Network & Internet settings.
6. Кликнете на Wi-Fi.
7. Scroll down the right menu, click on Управување со познати мрежи.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Заборави
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Метод 2: Рестартирајте го рутерот
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Забелешка: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Пронајдете го Копче за напојување на задниот дел од вашиот рутер.
2. Притиснете го копчето еднаш за да исклучи го.
3. Сега, исклучете вашиот Router power cable и почекајте додека струјата целосно не се исцеди од кондензаторите.
4. Потоа, поврзете повторно. на кабел за напојување и вклучете го по една минута.
5. Почекајте додека мрежната врска повторно не се воспостави и обидете се повторно да се најавите.
Исто така прочитајте: Поправете ги компјутерите што не се појавуваат на мрежата во Windows 10
Метод 3: Стартувајте мрежно решавање проблеми
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Удри на Windows клуч и тип Решенија за решавање проблеми во лентата за пребарување и Отвори.
2. Кликнете на Дополнителни смена на проблеми.
3. Изберете Мрежен адаптер и кликнете на Стартувај го смена на проблеми.
4. Select the network adapter to diagnose и кликнете на Следна.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Кликнете на Затворете ја смена за решавање проблеми.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Исто така прочитајте: Поправете го семејното споделување на YouTube TV што не работи
Метод 4: Поправка на системски датотеки
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Системска датотека тајна) /DISM (Управување со сервисирање и управување со распоредување) utilities on your Windows 10 PC.
1. Удри на Windows клуч, тип Command Prompt и кликнете на Стартувај како администратор.
2. Кликнете на Да во Корисничка сметка контрола брза.
3. Тип chkdsk C: / f / r / x командува и удира Внесете клуч.
4. Ако ви биде побарано порака, Chkdsk не може да работи… јачината на звукот е… во процес на употреба, потоа, напишете Y и хит на Внесете клуч.
5. Повторно, напишете ја командата: sfc / scannow и притиснете Внесете клуч да се кандидира на Системска датотека тајна скенирање.
Забелешка: Ќе се започне системско скенирање и ќе бидат потребни неколку минути за да се заврши. Во меѓувреме, можете да продолжите да вршите други активности, но внимавајте да не случајно го затворате прозорецот.
По завршувањето на скенирањето, ќе се прикаже една од овие пораки:
- Заштитата на ресурсите на Windows не најде никакви прекршувања на интегритетот.
- Windows Resource Protection не може да ја изврши бараната операција.
- Windows Resource Protection пронајде корумпирани датотеки и успешно ги поправи.
- Windows Resource Protection откри корумпирани датотеки, но не можеше да поправи некои од нив.
6. Откако ќе заврши скенирањето, рестартирајте вашиот компјутер.
7. Повторно, лансирајте Командно Прашај како администратор и извршете ги дадените команди една по друга:
dism.exe /Онлајн /cleanup-image /scanhealth dism.exe /Онлајн /cleanup-image /restorehealth dism.exe /Онлајн /cleanup-image /startcomponentcleanup
Забелешка: Мора да имате работна интернет конекција за правилно да ги извршите командите DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Удри на Windows клуч и тип Менаџер на уреди in the Windows search menu. Click on Отворено.
2. Проширете го Мрежни адаптери дел со двоен клик на него.
3. Десен-клик на вашиот Мрежен драјвер (на пример, Intel (R) Dual Band Wireless-AC 3168) и изберете го Оневозможи го уредот опција.
4. Confirm the below prompt by clicking on Да.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Овозможете го уредот опција.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Исто така прочитајте: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Одете во менито за пребарување и напишете cmd. Кликнете на Стартувај како администратор.
2. Напишете го следново команди и хит на Внесете клуч.
netsh winsock reset netsh int ip ресетирање ipconfig / release ipconfig / обнови
3. Wait for the commands to be executed and рестартирајте го вашиот компјутер.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Лансира Command Prompt by searching in the Windows мени and click on Run as administrator.
2. Тип ipconfig / flushdns in the command window and hit Внесете.
Исто така прочитајте: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Стартувај го Испратена дијалог прозорец со притискање Windows + R копчиња заедно.
2. Тип ncpa.cpl и хит Внесете клуч.
3. Right-click on your active мрежен адаптер и кликнете на Својства.
4. Одштиклирајте го Верзија на Интернет протокол 6 (TCP / IPv6) опција.
5. На крајот, кликнете на OK to save the changes and check if the issue is resolved.
Забелешка: If you use multiple network connections, navigate to Центар за мрежи и делење Променете го адаптерот settings. Right-click on the adapter and select Оневозможи. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Тип Менаџер на уреди in the Windows search menu and click Отворено.
2. Кликнете двапати на Мрежни адаптери да го прошири.
3. Десен-клик на вашиот возачот (пр Intel (R) Dual Band Wireless-AC 3168) и кликнете Ажурирај го двигателот.
4. Кликнете на Прелистајте го мојот компјутер за возачи to locate and install a driver manually.
5. Кликнете на Прелистувач button to choose any directory and click on Следна.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Најдобрите драјвери за вашиот уред се веќе инсталирани.
6. Кликнете на Затвори да излезете од прозорецот.
7. Рестарт the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Лансира Менаџер на уреди from the Windows search menu.
2. Десен-клик на возачот и одберете Деинсталирање на уред.
3. A warning prompt will be displayed on the screen. Check the box “Избришете го софтверот на возачот за овој уред” and confirm the prompt by clicking Избриши.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Посетете го веб-страница на производителот.
2. Најди превземи the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the преземена датотека and follow the given instructions to install it.
Исто така прочитајте: How to set up a VPN on Windows 10
Метод 10: Ажурирајте го Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Притиснете го копчето Виндоус + Јас клучеви заедно да се отвори Подесувања На вашиот компјутер.
2. Изберете Ажурирање и безбедност.
3. Изберете Провери за ажурирања.
4A. Click Инсталирај сега to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Ажуриран си порака.
Метод 11: Деинсталирајте ги неодамнешните ажурирања
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Притиснете и задржете Windows + R копчиња заедно да го отвориме Испратена дијалог-кутија.
2. Тип appwiz.cpl и хит Внесете.
3. Кликнете на Види инсталиран надградби.
4. Select the most recent update and click on Избриши.
5. Confirm the prompt, if any, and рестартирајте го компјутерот.
Исто така прочитајте: Како да го поправите Firefox што не се вчитува страници
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Забелешка: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Подесувања потоа Систем За нас. Once you have reset your network, you have to reinstall all networking software како VPN клиенти or Виртуелни прекинувачи.
1. Притиснете и задржете Копчиња Windows + I заедно да се отвори Подесувања на Windows.
2. Кликнете на Мрежа и Интернет.
3. Кликнете на Ресетирање на мрежата под Статус.
4. Потврдете го барањето со кликнување на Ресетирај сега.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Препорачано:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.