Most of the time, you will experience a kernel security check failure error after you have installed new software or hardware. Well, you will get this error when you will upgrade your windows because the drivers of previous versions of Windows will not be compatible with the new one. Hence, leaving with you the Kernel Security Check failure BSOD error.
Causes of kernel security check failure errors:
- Virus or malware infection that has corrupted Windows OS files.
- Device drivers are outdated or not properly configured.
- Corrupted or bad memory.
- Conflicting hardware or software.
- Damaged or corrupted Hard Disk.
First, your need to enable legacy boot, and if you don’t know how to do that, just follow this post to enable your advanced legacy boot option.
Before trying the below technical methods it’s advised that you do the following in order to fix kernel security check failure (KERNEL_SECURITY_CHECK_FAILURE) error:
- Make sure only one antivirus is running if you have purchased another make sure to turn off Windows Defender.
- Run Automatic Repair or use System Restore to try to fix the issue.
- Run a full system virus and malware scan with your antivirus.
- Install any pending updates through Windows update.
- Reinstall drivers from the manufacturer’s website.
- Run malware bytes.
Fix kernel security check failure (KERNEL_SECURITY_CHECK_FAILURE)
Method 1: Uninstall Graphic Card Driver
1. Boot your PC into Safe mode from the advanced boot menu.
2. വിൻഡോസ് കീ + ആർ അമർത്തുക, തുടർന്ന് " എന്ന് ടൈപ്പ് ചെയ്യുകdevmgmt.msc” and hit Enter to Device Manager.
3. In Device Manager, expand the Display adapter.
4. Next, select your എൻവിഡിയ കാർഡ് and then right click then select പ്രോപ്പർട്ടികൾ.
5. ഇപ്പോൾ തിരഞ്ഞെടുക്കുക ഡ്രൈവർ ടാബ് ഒപ്പം ക്ലിക്ക് റോൾ ബാക്ക് ഡ്രൈവർ (If asked for confirmation click Yes to confirm).
6. If the Roll Back option is grayed out then click “അൺഇൻസ്റ്റാൾ ചെയ്യുക” ഈ ഡ്രൈവർ അൺഇൻസ്റ്റാൾ ചെയ്യാൻ.
7. Restart your PC and on the advanced boot, select “Start your PC normally.”
രീതി 2: ഡ്രൈവർ വെരിഫയർ പ്രവർത്തിപ്പിക്കുക
നിങ്ങൾക്ക് സാധാരണയായി വിൻഡോസിലേക്ക് ലോഗിൻ ചെയ്യാൻ കഴിയുമെങ്കിൽ മാത്രമേ ഈ രീതി ഉപയോഗപ്രദമാകൂ, സുരക്ഷിത മോഡിൽ അല്ല. അടുത്തതായി, ഒരു സിസ്റ്റം വീണ്ടെടുക്കൽ പോയിൻ്റ് സൃഷ്ടിക്കുന്നത് ഉറപ്പാക്കുക.
To run Driver Verifier to fix kernel security check failure, go here.
രീതി 3: സിസ്റ്റം ഫയൽ ചെക്കർ പ്രവർത്തിപ്പിച്ച് ഡിസ്ക് പരിശോധിക്കുക
1. Again, Boot your PC into safe mode from the above-advanced boot menu.
2. Once you login into safe mode, press Windows key + X and click on കമാൻഡ് പ്രോംപ്റ്റ് (അഡ്മിൻ).
3. In the command prompt, type the following command and hit enter after each one:
sfc /scannow chkdsk /f C:
4. Once the process is finished, exit the cmd.
5. Now type memory in the Windows search bar and select “വിൻഡോസ് മെമ്മറി ഡയഗ്നോസ്റ്റിക്."
6. In the set of options displayed, select “പ്രശ്നങ്ങൾ പുനരാരംഭിക്കുക, പ്രശ്നങ്ങൾ പരിശോധിക്കുക. "
7. After which Windows will restart to check for possible RAM errors and will hopefully display the possible reasons as for why you get the ബ്ലൂ സ്ക്രീൻ ഓഫ് ഡെത്ത് (BSOD) പിശക് സന്ദേശം.
8. Reboot your PC and check if the problem is resolved or not.
രീതി 4: Memtest86 പ്രവർത്തിപ്പിക്കുക
To be sure, again run the memory test, but this time using Memtest as it eliminates all the possible exceptions, and it’s better than the built-in memory test as it runs outside the Windows environment.
Note: Before starting, make sure you have access to another computer as you will need to download and burn the software to the disc or USB flash drive. It’s best to leave the computer overnight when running Memtest as it sure likely to takes some time.
1. Connect a യുഎസ് ബി ഫ്ളാഷ് ഡ്രെവ് to your working PC.
2. ഡ Download ൺലോഡ് ചെയ്ത് ഇൻസ്റ്റാൾ ചെയ്യുക Windows Memtest86 Auto-installer for USB Key.
3. വലത്-ക്ലിക്കുചെയ്യുക downloaded image file കൂടാതെ "ഇവിടെ എക്സ്ട്രാക്റ്റുചെയ്യുക"ഓപ്ഷൻ.
4. Once extracted, open the ഫോൾഡർ ഒപ്പം പ്രവർത്തിപ്പിക്കുക Memtest86+ USB ഇൻസ്റ്റാളർ.
5. നിങ്ങളുടെ തിരഞ്ഞെടുക്കുക plugged USB drive to burn the MemTest86 software (This will erase all the content from your USB).
6. Once the above process is finished, insert the USB to the PC, giving the KERNEL_SECURITY_CHECK_FAILURE error.
7. Restart your PC and make sure boot from USB flash drive is selected.
8. Memtest86 will begin testing for memory corruption in your system.
9. If you have passed all 8 phases of the test, you can be sure that your memory is working correctly.
10. If some of the steps were unsuccessful, then Memtest86 will find memory corruption which means that your കേർണൽ സുരക്ഷാ പരിശോധന പരാജയം (KERNEL_SECURITY_CHECK_FAILURE) blue screen of death error is because of bad/corrupt memory.
11. ക്രമത്തിൽ fix kernel security check failure error, മോശം മെമ്മറി സെക്ടറുകൾ കണ്ടെത്തിയാൽ നിങ്ങളുടെ റാം മാറ്റിസ്ഥാപിക്കേണ്ടതുണ്ട്.
Method 5: Run Disk Cleanup and Error Checking
1. Again, boot your windows into safe mode and follow the below steps for each hard disk partition you have(example Drive C: or E:).
2. Go to This PC or My PC കൂടാതെ വലത്-ക്ലിക്കുചെയ്യുക ഡ്രൈവ് തിരഞ്ഞെടുക്കാൻ പ്രോപ്പർട്ടികൾ.
3. Now, from the പ്രോപ്പർട്ടീസ് ജാലകം തിരഞ്ഞെടുക്കുക ഡിസ്ക് ക്ലീനപ്പ് and click clean up സിസ്റ്റം ഫയലുകൾ.
4. Again, go to the properties windows തിരഞ്ഞെടുക്കുക ടൂൾസ് ടാബ്.
5. അടുത്തതായി, ക്ലിക്കുചെയ്യുക പരിശോധിക്കുക കീഴെ Error-checking.
6. Follow the on-screen instruction to finish error checking.
7. Restart your PC and boot to windows normally.
അത്രയേയുള്ളൂ, നിങ്ങൾ വിജയിച്ചു Fix kernel security check failure (KERNEL_SECURITY_CHECK_FAILURE), but if you still have any queries regarding this guide, then feel free to ask them in the comments section.