When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- കാലഹരണപ്പെട്ട ഓപ്പറേറ്റിംഗ് സിസ്റ്റം.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ഐക്കൺ.
2. If the status is set to ബന്ധിപ്പിച്ചിട്ടില്ല, ക്ലിക്കുചെയ്യുക Network globe icon, choose your Wi-Fi network and click on ബന്ധിപ്പിക്കുക button. Make sure വിമാന മോഡ് ഓണാക്കിയിട്ടില്ല.
3. If you again face the same network connection error code, then click on the വിച്ഛേദിക്കുക button, wait for some time and reconnect it again.
4. Try connecting to a different വൈഫൈ network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. വലത്-ക്ലിക്കുചെയ്യുക വൈഫൈ ഐക്കൺ തെരഞ്ഞെടുക്കുക Open Network & Internet settings.
6. ക്ലിക്ക് ചെയ്യുക വൈഫൈ.
7. Scroll down the right menu, click on അറിയാവുന്ന നെറ്റ്വർക്കുകൾ നിയന്ത്രിക്കുക.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select മറക്കരുത്.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
രീതി 2: റൂട്ടർ പുനരാരംഭിക്കുക
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
കുറിപ്പ്: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. ഇത് കണ്ടെത്തു പവർ ബട്ടൺ നിങ്ങളുടെ റൂട്ടറിൻ്റെ പിൻഭാഗത്ത്.
2. ബട്ടൺ ഒരിക്കൽ അമർത്തുക അതു നിർത്തൂ.
3. ഇപ്പോൾ, വിച്ഛേദിക്കുക നിങ്ങളുടെ Router power cable കപ്പാസിറ്ററുകളിൽ നിന്ന് വൈദ്യുതി പൂർണ്ണമായും ചോർന്നുപോകുന്നതുവരെ കാത്തിരിക്കുക.
4. പിന്നെ, വീണ്ടും കണക്റ്റുചെയ്യുക The പവർ കേബിൾ ഒരു മിനിറ്റിനു ശേഷം അത് ഓണാക്കുക.
5. നെറ്റ്വർക്ക് കണക്ഷൻ പുനഃസ്ഥാപിക്കുന്നതുവരെ കാത്തിരിക്കുക ഒപ്പം വീണ്ടും സൈൻ ഇൻ ചെയ്യാൻ ശ്രമിക്കുക.
വായിക്കുക: Fix Computers Not Showing Up on Network in Windows 10
രീതി 3: നെറ്റ്വർക്ക് ട്രബിൾഷൂട്ടർ പ്രവർത്തിപ്പിക്കുക
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. ഹിറ്റ് വിൻഡോസ് കീ ടൈപ്പ് ചെയ്യുക ക്രമീകരണങ്ങൾ പരിഹരിക്കുക തിരയൽ ബാറിലും ഒപ്പം തുറക്കുക.
2. ക്ലിക്ക് ചെയ്യുക അധിക ട്രബിൾഷൂട്ടറുകൾ.
3. തിരഞ്ഞെടുക്കുക നെറ്റ്വർക്ക് അഡാപ്റ്റർ ഒപ്പം ക്ലിക്ക് ട്രബിൾഷൂട്ടർ പ്രവർത്തിപ്പിക്കുക.
4. Select the network adapter to diagnose ഒപ്പം ക്ലിക്ക് അടുത്തത്.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, ക്ലിക്ക് ചെയ്യുക ട്രബിൾഷൂട്ടർ അടയ്ക്കുക.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
വായിക്കുക: ഫാമിലി ഷെയറിംഗ് YouTube ടിവി പ്രവർത്തിക്കുന്നില്ലെന്ന് പരിഹരിക്കുക
രീതി 4: സിസ്റ്റം ഫയലുകൾ നന്നാക്കുക
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (സിസ്റ്റം ഫയൽ ചെക്കർ) /DISM (ഡിപ്ലോയ്മെന്റ് ഇമേജ് സെർവറിംഗ് ആന്റ് മാനേജ്മെന്റ്) utilities on your Windows 10 PC.
1. ഹിറ്റ് വിൻഡോസ് കീ, ടൈപ്പ് ചെയ്യുക കമാൻഡ് പ്രോംപ്റ്റ് ഒപ്പം ക്ലിക്ക് നിയന്ത്രണാധികാരിയായി.
2. ക്ലിക്ക് ചെയ്യുക അതെ ലെ ഉപയോക്തൃ അക്കൗണ്ട് നിയന്ത്രണം പ്രോംപ്റ്റ്.
3. ടൈപ്പ് ചെയ്യുക chkdsk C: /f /r /x കമാൻഡ് ആൻഡ് ഹിറ്റ് കീ നൽകുക.
4. നിങ്ങളോട് ഒരു സന്ദേശം ആവശ്യപ്പെട്ടാൽ, Chkdsk പ്രവർത്തിപ്പിക്കാൻ കഴിയില്ല... വോളിയം... ഉപയോഗ പ്രക്രിയയിലാണ്, പിന്നെ, ടൈപ്പ് ചെയ്യുക Y പിന്നെ ഹിറ്റ് ചെയ്യുക കീ നൽകുക.
5. വീണ്ടും, കമാൻഡ് ടൈപ്പ് ചെയ്യുക: sfc / scannow അമർത്തുക കീ നൽകുക പ്രവർത്തിപ്പിക്കാൻ സിസ്റ്റം ഫയൽ ചെക്കർ സ്കാൻ ചെയ്യുക.
കുറിപ്പ്: ഒരു സിസ്റ്റം സ്കാൻ ആരംഭിക്കും, അത് പൂർത്തിയാക്കാൻ കുറച്ച് മിനിറ്റുകൾ എടുക്കും. അതേസമയം, നിങ്ങൾക്ക് മറ്റ് പ്രവർത്തനങ്ങൾ തുടരാം, പക്ഷേ അബദ്ധത്തിൽ വിൻഡോ അടയ്ക്കാതിരിക്കാൻ ശ്രദ്ധിക്കുക.
സ്കാൻ പൂർത്തിയാക്കിയ ശേഷം, ഇത് ഇനിപ്പറയുന്ന ഏതെങ്കിലും സന്ദേശങ്ങൾ കാണിക്കും:
- വിൻഡോസ് റിസോഴ്സ് പ്രൊട്ടക്ഷൻ സമഗ്രത ലംഘനങ്ങളൊന്നും കണ്ടെത്തിയില്ല.
- വിൻഡോസ് റിസോഴ്സ് പ്രൊട്ടക്ഷന് ആവശ്യപ്പെട്ട പ്രവർത്തനം നടത്താൻ കഴിഞ്ഞില്ല.
- വിൻഡോസ് റിസോഴ്സ് പ്രൊട്ടക്ഷൻ കേടായ ഫയലുകൾ കണ്ടെത്തി അവ വിജയകരമായി നന്നാക്കി.
- വിൻഡോസ് റിസോഴ്സ് പ്രൊട്ടക്ഷൻ കേടായ ഫയലുകൾ കണ്ടെത്തിയെങ്കിലും അവയിൽ ചിലത് പരിഹരിക്കാൻ കഴിഞ്ഞില്ല.
6. സ്കാൻ പൂർത്തിയായിക്കഴിഞ്ഞാൽ, പുനരാരംഭിക്കുക നിങ്ങളുടെ പിസി.
7. വീണ്ടും, സമാരംഭിക്കുക അഡ്മിനിസ്ട്രേറ്ററായി കമാൻഡ് പ്രോംപ്റ്റ് നൽകിയിരിക്കുന്ന കമാൻഡുകൾ ഒന്നിനുപുറകെ ഒന്നായി നടപ്പിലാക്കുക:
dism.exe /ഓൺലൈൻ /cleanup-image /scanhealth dism.exe /ഓൺലൈൻ /cleanup-image /restorehealth dism.exe /ഓൺലൈൻ /cleanup-image /startcomponentcleanup
കുറിപ്പ്: DISM കമാൻഡുകൾ ശരിയായി നടപ്പിലാക്കാൻ നിങ്ങൾക്ക് പ്രവർത്തിക്കുന്ന ഒരു ഇൻ്റർനെറ്റ് കണക്ഷൻ ഉണ്ടായിരിക്കണം.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. ഹിറ്റ് വിൻഡോസ് കീ ടൈപ്പ് ചെയ്യുക ഉപകരണ മാനേജർ in the Windows search menu. Click on തുറക്കുക.
2. വികസിപ്പിക്കുക നെറ്റ്വർക്ക് അഡാപ്റ്ററുകൾ വിഭാഗത്തിൽ ഇരട്ട-ക്ലിക്കുചെയ്യുക.
3. നിങ്ങളുടേതിൽ റൈറ്റ് ക്ലിക്ക് ചെയ്യുക നെറ്റ്വർക്ക് ഡ്രൈവർ (ഉദാഹരണത്തിന്, Intel (R) Dual Band Wireless-AC 3168) തിരഞ്ഞെടുക്കുക ഉപകരണം പ്രവർത്തനരഹിതമാക്കുക ഓപ്ഷൻ.
4. Confirm the below prompt by clicking on അതെ.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the ഉപകരണം പ്രവർത്തനക്ഷമമാക്കുക ഓപ്ഷൻ.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
വായിക്കുക: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. ക്ലിക്ക് ചെയ്യുക നിയന്ത്രണാധികാരിയായി.
2. ഇനിപ്പറയുന്നത് ടൈപ്പ് ചെയ്യുക കമാൻഡുകൾ പിന്നെ ഹിറ്റ് ചെയ്യുക കീ നൽകുക.
നെറ്റ്ഷ് വിൻസ്കോക്ക് റീസെറ്റ് netsh int ip റീസെറ്റ് ചെയ്യുക ipconfig / release ipconfig / പുതുക്കുക
3. കമാൻഡുകൾ എക്സിക്യൂട്ട് ചെയ്യുന്നതിനായി കാത്തിരിക്കുക നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക.
രീതി 7: DNS കാഷെ ഫ്ലഷ് ചെയ്യുക
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. സമാരംഭിക്കുക കമാൻഡ് പ്രോംപ്റ്റ് by searching in the വിൻഡോസ് മെനു and click on Run as administrator.
2. ടൈപ്പ് ചെയ്യുക ipconfig / flushdns in the command window and hit നൽകുക.
വായിക്കുക: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. സമാരംഭിക്കുക പ്രവർത്തിപ്പിക്കുക അമർത്തി ഡയലോഗ് ബോക്സ് വിൻഡോസ് + ആർ കീകൾ ഒന്നിച്ചു.
2. ടൈപ്പ് ചെയ്യുക ncpa.cpl ഹിറ്റ് കീ നൽകുക.
3. Right-click on your active നെറ്റ്വർക്ക് അഡാപ്റ്റർ ഒപ്പം ക്ലിക്ക് പ്രോപ്പർട്ടീസ്.
4. അൺചെക്ക് ചെയ്യുക ഇന്റർനെറ്റ് പ്രോട്ടോക്കോൾ പതിപ്പ് 6 (ടിസിപി / ഐപിവി 6) ഓപ്ഷൻ.
5. അവസാനമായി, ക്ലിക്കുചെയ്യുക OK to save the changes and check if the issue is resolved.
കുറിപ്പ്: If you use multiple network connections, navigate to നെറ്റ്വർക്ക്, ഷെയറിംഗ് സെന്റർ ഒപ്പം അഡാപ്റ്റർ മാറ്റുക settings. Right-click on the adapter and select അപ്രാപ്തമാക്കുക. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. ടൈപ്പ് ചെയ്യുക ഉപകരണ മാനേജർ in the Windows search menu and click തുറക്കുക.
2. ഡബിൾ ക്ലിക്ക് ചെയ്യുക നെറ്റ്വർക്ക് അഡാപ്റ്ററുകൾ അത് വിപുലീകരിക്കാൻ.
3. നിങ്ങളുടേതിൽ റൈറ്റ് ക്ലിക്ക് ചെയ്യുക ഡ്രൈവർ (ഉദാ ഇന്റൽ(ആർ) ഡ്യുവൽ ബാൻഡ് വയർലെസ്-എസി 3168) ക്ലിക്കുചെയ്യുക ഡ്രൈവർ പരിഷ്കരിക്കുക.
4. ക്ലിക്ക് ചെയ്യുക ഡ്രൈവറുകൾക്കായി എന്റെ കമ്പ്യൂട്ടർ ബ്ര rowse സുചെയ്യുക to locate and install a driver manually.
5. അതിൽ ക്ലിക്ക് ചെയ്യുക ബ്രൌസർ button to choose any directory and click on അടുത്തത്.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, നിങ്ങളുടെ ഉപകരണത്തിനായുള്ള മികച്ച ഡ്രൈവറുകൾ ഇതിനകം ഇൻസ്റ്റാൾ ചെയ്തിട്ടുണ്ട്.
6. ക്ലിക്ക് ചെയ്യുക അടയ്ക്കുക വിൻഡോയിൽ നിന്ന് പുറത്തുകടക്കാൻ.
7. പുനരാരംഭിക്കുക the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. സമാരംഭിക്കുക ഉപകരണ മാനേജർ from the Windows search menu.
2. വലത്-ക്ലിക്കുചെയ്യുക ഡ്രൈവർ തെരഞ്ഞെടുക്കുക ഉപകരണം അൺഇൻസ്റ്റാളുചെയ്യുക.
3. A warning prompt will be displayed on the screen. Check the box “ഈ ഡിവൈസിനുള്ള ഡ്രൈവർ സോഫ്റ്റ്വെയർ നീക്കം ചെയ്യുക” and confirm the prompt by clicking അൺഇൻസ്റ്റാൾ ചെയ്യുക.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. സന്ദർശിക്കുക നിർമ്മാതാവിന്റെ വെബ്സൈറ്റ്.
2. കണ്ടെത്തുക ഒപ്പം ഇറക്കുമതി the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the ഡൗൺലോഡ് ചെയ്ത ഫയൽ and follow the given instructions to install it.
വായിക്കുക: How to set up a VPN on Windows 10
രീതി 10: വിൻഡോസ് അപ്ഡേറ്റ് ചെയ്യുക
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. അമർത്തുക Windows + I. കീകൾ തുറക്കാൻ ഒരുമിച്ച് ക്രമീകരണങ്ങൾ നിങ്ങളുടെ കമ്പ്യൂട്ടറിൽ.
2. തിരഞ്ഞെടുക്കുക അപ്ഡേറ്റും സുരക്ഷയും.
3. തിരഞ്ഞെടുക്കുക അപ്ഡേറ്റുകൾക്കായി പരിശോധിക്കുക.
4A. Click ഇപ്പോൾ ഇൻസ്റ്റാൾ ചെയ്യുക to download and install the latest update available.
4B. If your system is already up-to-date, then it will show നിങ്ങൾ കാലികമാണ് സന്ദേശം.
രീതി 11: സമീപകാല അപ്ഡേറ്റുകൾ അൺഇൻസ്റ്റാൾ ചെയ്യുക
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. അമർത്തിപ്പിടിക്കുക വിൻഡോസ് + ആർ കീകൾ തുറക്കാൻ ഒരുമിച്ച് പ്രവർത്തിപ്പിക്കുക ഡയലോഗ് ബോക്സ്.
2. ടൈപ്പ് ചെയ്യുക appwiz.cpl ഹിറ്റ് നൽകുക.
3. ക്ലിക്ക് ചെയ്യുക ഇൻസ്റ്റാളുചെയ്ത അപ്ഡേറ്റുകൾ കാണുക.
4. Select the most recent update and click on അൺഇൻസ്റ്റാൾ ചെയ്യുക.
5. Confirm the prompt, if any, and പിസി റീബൂട്ട് ചെയ്യുക.
വായിക്കുക: ഫയർഫോക്സ് പേജുകൾ ലോഡ് ചെയ്യാത്തത് എങ്ങനെ പരിഹരിക്കാം
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
കുറിപ്പ്: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to ക്രമീകരണങ്ങൾ അപ്പോള് സിസ്റ്റം ഒപ്പം കുറിച്ച്. Once you have reset your network, you have to reinstall all networking software പോലെ VPN ക്ലയന്റുകൾ or വെർച്വൽ സ്വിച്ചുകൾ.
1. അമർത്തിപ്പിടിക്കുക വിൻഡോസ് + ഐ കീകൾ തുറക്കാൻ ഒരുമിച്ച് Windows സജ്ജീകരണങ്ങൾ.
2. ക്ലിക്ക് ചെയ്യുക നെറ്റ്വർക്കും ഇന്റർനെറ്റും.
3. ക്ലിക്ക് ചെയ്യുക നെറ്റ്വർക്ക് റീസെറ്റ് ചെയ്യുക കീഴെ പദവി.
4. ക്ലിക്ക് ചെയ്തുകൊണ്ട് നിർദ്ദേശം സ്ഥിരീകരിക്കുക ഇപ്പോൾ പുന et സജ്ജമാക്കുക.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
ശുപാർശ ചെയ്ത:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.