Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
എന്തെങ്കിലും തെറ്റ് സംഭവിച്ചാൽ ഒരു പുനഃസ്ഥാപിക്കൽ പോയിൻ്റ് സൃഷ്ടിക്കുന്നത് ഉറപ്പാക്കുക.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
കുറിപ്പ്: Backup the registry just in case something goes wrong.
1.വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക regedit രജിസ്ട്രി എഡിറ്റർ തുറക്കാൻ എന്റർ അമർത്തുക.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3. തിരഞ്ഞെടുക്കുന്നത് ഉറപ്പാക്കുക {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find അപ്പർ ഫിൽട്ടറുകളും ലോവർ ഫിൽട്ടറുകളും.
4.Right-click on each of them and select ഇല്ലാതാക്കുക.
5. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക.
രീതി 2: സിസ്റ്റം പുനഃസ്ഥാപിക്കൽ പ്രവർത്തിപ്പിക്കുക
1.വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക”sysdm.cpl” എന്നിട്ട് എൻ്റർ അടിക്കുക.
2. തിരഞ്ഞെടുക്കുക സിസ്റ്റം പരിരക്ഷണം ടാബ് ചെയ്ത് തിരഞ്ഞെടുക്കുക സിസ്റ്റം പുനഃസ്ഥാപിക്കുക.
3.അടുത്തത് ക്ലിക്ക് ചെയ്ത് ആവശ്യമുള്ളത് തിരഞ്ഞെടുക്കുക സിസ്റ്റം വീണ്ടെടുക്കൽ പോയിന്റ്.
4.സിസ്റ്റം പുനഃസ്ഥാപിക്കൽ പൂർത്തിയാക്കാൻ ഓൺ-സ്ക്രീൻ നിർദ്ദേശങ്ങൾ പാലിക്കുക. നിങ്ങൾക്ക് കഴിയുമോ എന്ന് നോക്കുക Fix USB Error Code 52 Windows cannot verify the digital signature, ഇല്ലെങ്കിൽ താഴെ ലിസ്റ്റുചെയ്തിരിക്കുന്ന രീതികൾ തുടരുക.
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on പവർ ബട്ടൺ then hold മാറ്റം ഒപ്പം ക്ലിക്ക് പുനരാരംഭിക്കുക (while holding the shift button).
2.നിങ്ങൾ കാണുന്നത് വരെ Shift ബട്ടൺ ഉപേക്ഷിക്കുന്നില്ലെന്ന് ഉറപ്പാക്കുക വിപുലമായ വീണ്ടെടുക്കൽ ഓപ്ഷനുകൾ മെനു.
3.ഇപ്പോൾ അഡ്വാൻസ്ഡ് റിക്കവറി ഓപ്ഷൻസ് മെനുവിലെ ഇനിപ്പറയുന്നതിലേക്ക് നാവിഗേറ്റ് ചെയ്യുക:
ട്രബിൾഷൂട്ട് > വിപുലമായ ഓപ്ഷനുകൾ > സ്റ്റാർട്ടപ്പ് ക്രമീകരണങ്ങൾ > പുനരാരംഭിക്കുക
4. നിങ്ങൾ പുനരാരംഭിക്കുക ക്ലിക്ക് ചെയ്താൽ നിങ്ങളുടെ പിസി പുനരാരംഭിക്കും, കൂടാതെ ഓപ്ഷനുകളുടെ ഒരു ലിസ്റ്റ് ഉള്ള ഒരു നീല സ്ക്രീൻ നിങ്ങൾ കാണും, "" എന്ന ഓപ്ഷന് അടുത്തുള്ള നമ്പർ കീ അമർത്തുന്നത് ഉറപ്പാക്കുക.ഡ്രൈവർ സിഗ്നേച്ചർ എൻഫോഴ്സ്മെന്റ് പ്രവർത്തനരഹിതമാക്കുക."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc ഉപകരണ മാനേജർ തുറക്കാൻ എൻ്റർ അമർത്തുക.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select ഡ്രൈവർ അപ്ഡേറ്റുചെയ്യുക.
7. "തിരഞ്ഞെടുക്കുക"അപ്ഡേറ്റുചെയ്ത ഡ്രൈവർ സോഫ്റ്റ്വെയറിനായി യാന്ത്രികമായി തിരയുക."
8.Repeat the above process for every problematic device listed in Device Manager.
9. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക, നിങ്ങൾക്ക് കഴിയുമോ എന്ന് നോക്കുക Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1.വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക devmgmt.msc Enter അമർത്തുക.
2. റൈറ്റ് ക്ലിക്ക് ചെയ്യുക each of problematic device (yellow exclamation mark next to it) and select അൺഇൻസ്റ്റാൾ ചെയ്യുക.
3.Click Yes/OK to continue with uninstallation.
4. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys ഫയലുകൾ usbehciold.sys & usbhubold.sys.
3.വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക devmgmt.msc Enter അമർത്തുക.
4.വികസിപ്പിക്കുക യൂണിവേഴ്സൽ സീരിയൽ ബസ് കണ്ട്രോളറുകൾ തുടർന്ന് വലത്-ക്ലിക്കുചെയ്യുക Standard Enhanced PCI to USB Host Controller തെരഞ്ഞെടുക്കുക അൺഇൻസ്റ്റാൾ ചെയ്യുക.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2.ഇപ്പോൾ cmd-ൽ താഴെ പറയുന്നവ ടൈപ്പ് ചെയ്ത് എൻ്റർ അമർത്തുക:
Sfc / scannow sfc / scannow /offbootdir=c: /offwindir=c:windows
3. മുകളിലുള്ള പ്രക്രിയ പൂർത്തിയാകുന്നതുവരെ കാത്തിരിക്കുക, ഒരിക്കൽ നിങ്ങളുടെ പിസി പുനരാരംഭിക്കുക.
4.അടുത്തതായി, ഇവിടെ നിന്ന് CHKDSK പ്രവർത്തിപ്പിക്കുക ചെക്ക് ഡിസ്ക് യൂട്ടിലിറ്റി (CHKDSK) ഉപയോഗിച്ച് ഫയൽ സിസ്റ്റം പിശകുകൾ പരിഹരിക്കുക.
5. മുകളിൽ പറഞ്ഞിരിക്കുന്ന പ്രക്രിയ പൂർത്തിയാക്കാൻ അനുവദിക്കുക, മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി വീണ്ടും റീബൂട്ട് ചെയ്യുക.
നിങ്ങൾക്ക് കഴിയുമോ എന്ന് നോക്കൂ Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1.Windows കീ + X അമർത്തുക എന്നിട്ട് തിരഞ്ഞെടുക്കുക കമാൻഡ് പ്രോംപ്റ്റ് (അഡ്മിൻ).
2.Type the following command into cmd and hit Enter after each one:
bcdedit -സെറ്റ് ലോഡ് ഓപ്ഷനുകൾ DDISABLE_INTEGRITY_CHECKS
bcdedit -സെറ്റ് ടെസ്റ്റ് സൈനിംഗ് ഓൺ
3.If the above command doesn’t work then try the following:
bcdedit/deletevalue loadoptions
ബിസിഡിഡിറ്റ് -സെറ്റ് ടെസ്റ്റിംഗ് ഓഫ്
4. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക.
നിങ്ങൾക്കായി ശുപാർശ ചെയ്തത്:
അതാണ് നിങ്ങൾ വിജയകരമായി പൂർത്തിയാക്കിയത് Fix USB Error Code 52 Windows cannot verify the digital signature എന്നാൽ ഈ ഗൈഡിനെക്കുറിച്ച് നിങ്ങൾക്ക് ഇപ്പോഴും എന്തെങ്കിലും ചോദ്യങ്ങളുണ്ടെങ്കിൽ, അഭിപ്രായ വിഭാഗത്തിൽ അവരോട് ചോദിക്കാൻ മടിക്കേണ്ടതില്ല.