If you are facing Windows Update Error 80246008, then this means that there are issues with Background Intelligent Transfer Service or with COM+ Event System. Either of these services cannot start which are important for Windows Update to work and hence the error. While sometimes configuration error with BITS can cause the above issue, as you see, there are different reasons, but they are all associated with BITS. So without wasting any time let’s see how to actually Fix Windows Update Error 80246008 with the below-listed troubleshooting guide.
Fix Windows Update Error 80246008
എന്തെങ്കിലും തെറ്റ് സംഭവിച്ചാൽ ഒരു പുനഃസ്ഥാപിക്കൽ പോയിൻ്റ് സൃഷ്ടിക്കുന്നത് ഉറപ്പാക്കുക.
Method 1: Make Sure BITS and COM+ Event System Services are running
1. Press Windows Keys + R then type സെര്വിചെസ്.മ്സ്ച് Enter അമർത്തുക.
2. Now find BITS and COM+ Event System Services, then double click on each of them.
3. സ്റ്റാർട്ടപ്പ് തരം സജ്ജീകരിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക ഓട്ടോമാറ്റിക്, and each of the above services is running, if not then click on the ആരംഭിക്കുക ബട്ടൺ.
4. പ്രയോഗിക്കുക ക്ലിക്കുചെയ്യുക, തുടർന്ന് ശരി.
5. Reboot your PC and again try to update Windows.
രീതി 2: രജിസ്ട്രി ഫിക്സ്
1. Open Notepad and copy the below content as it is:
വിൻഡോസ് രജിസ്ട്രി എഡിറ്റർ പതിപ്പ് 5.00
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesBITS]
“DisplayName”=”@%SystemRoot%system32qmgr.dll,-1000”
“ImagePath”=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,
74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,
00,76,00,63,00,68,00,6f,00,73,00,74,00,2e,00,65,00,78,00,65,00,20,00,2d,00,
6b,00,20,00,6e,00,65,00,74,00,73,00,76,00,63,00,73,00,00,00
“Description”=”@%SystemRoot%system32qmgr.dll,-1001”
“ObjectName”=”LocalSystem”
“ErrorControl”=dword:00000001
“ആരംഭിക്കുക”=dword:00000002
“DelayedAutoStart”=dword:00000001
“Type”=dword:00000020
“DependOnService”=hex(7):52,00,70,00,63,00,53,00,73,00,00,00,45,00,76,00,65,00,
6e,00,74,00,53,00,79,00,73,00,74,00,65,00,6d,00,00,00,00,00
“ServiceSidType”=dword:00000001
“RequiredPrivileges”=hex(7):53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,47,
00,6c,00,6f,00,62,00,61,00,6c,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,00,
67,00,65,00,00,00,53,00,65,00,49,00,6d,00,70,00,65,00,72,00,73,00,6f,00,6e,
00,61,00,74,00,65,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,00,67,00,65,00,
00,00,53,00,65,00,54,00,63,00,62,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,
00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00,6e,00,50,00,
72,00,69,00,6d,00,61,00,72,00,79,00,54,00,6f,00,6b,00,65,00,6e,00,50,00,72,
00,69,00,76,00,69,00,6c,00,65,00,67,00,65,00,00,00,53,00,65,00,49,00,6e,00,
63,00,72,00,65,00,61,00,73,00,65,00,51,00,75,00,6f,00,74,00,61,00,50,00,72,
00,69,00,76,00,69,00,6c, 00,65,00,67,00,65,00,00,00,00,00
“FailureActions”=hex:80,51,01,00,00,00,00,00,00,00,00,00,03,00,00,00,14,00,00,
00,01,00,00,00,60,ea,00,00,01,00,00,00,c0,d4,01,00,00,00,00,00,00,00,00,00
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesBITSParameters]
“ServiceDll”=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,
00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,
71,00,6d,00,67,00,72,00,2e,00,64,00,6c,00,6c,00,00,00
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesBITSPerformance]
“Library”=”bitsperf.dll”
“Open”=”PerfMon_Open”
“Collect”=”PerfMon_Collect”
“Close”=”PerfMon_Close”
“InstallType”=dword:00000001
“PerfIniFile”=”bitsctrs.ini”
“First Counter”=dword:0000086c
“Last Counter”=dword:0000087c
“First Help”=dword:0000086d
“Last Help”=dword:0000087d
“Object List”=”2156”
“PerfMMFileName”=”GlobalMMF_BITS_s”
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesBITSSecurity]
“Security”=hex:01,00,14,80,94,00,00,00,a4,00,00,00,14,00,00,00,34,00,00,00,02,
00,20,00,01,00,00,00,02,c0,18,00,00,00,0c,00,01,02,00,00,00,00,00,05,20,00,
00,00,20,02,00,00,02,00,60,00,04,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,
00,00,00,00,05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,
20,00,00,00,20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,0b,
00,00,00,00,00,18,00,fd,01,02,00,01,02,00,00,00,00,00,05,20,00,00,00,23,02,
00,00,01,02,00,00,00,00,00,05,20,00,00,00,20,02,00,00,01,02,00,00,00,00,00,
05,20,00,00,00,20,02,00,00
2. Now from നോട്ട്പാഡ് മെനു, ക്ലിക്കുചെയ്യുക ഫയല് തുടർന്ന് ക്ലിക്കുചെയ്യുക ഇതായി സംരക്ഷിക്കുക.
3. Select your desired location (most preferably Desktop) and then name the file as BITS.reg (the .reg extension is important).
4. From the Save as type drop-down select All file തുടർന്ന് ക്ലിക്കുചെയ്യുക രക്ഷിക്കും.
5. Right-click on the file (BITS.reg) and select നിയന്ത്രണാധികാരിയായി.
6. If will give warning, select അതെ തുടരാൻ.
7. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക.
8. തുറക്കുക കമാൻഡ് പ്രോംപ്റ്റ്. തിരയുന്നതിലൂടെ ഉപയോക്താവിന് ഈ ഘട്ടം നിർവഹിക്കാൻ കഴിയും 'cmd' തുടർന്ന് എന്റർ അമർത്തുക.
9. Type the following command into cmd and hit Enter after each one:
NET START BITS
NET START COM+ EVENT SYSTEM
SC QC BITS
SC QUERYEX BITS
SC QC EVENTSYSTEM
10. Again try to Update Windows and see if you’re able to Fix Windows Update Error 80246008.
രീതി 3: വിൻഡോസ് അപ്ഡേറ്റ് ട്രബിൾഷൂട്ടർ പ്രവർത്തിപ്പിക്കുക
1. In control panel search ട്രബിൾഷൂട്ടിംഗ് in the Search Bar on the top right side and then click on ട്രബിൾഷൂട്ടിംഗ്.
2. അടുത്തതായി, ഇടത് വിൻഡോയിൽ നിന്ന്, പാളി തിരഞ്ഞെടുക്കുക എല്ലാം കാണുക.
3. തുടർന്ന് ട്രബിൾഷൂട്ട് കമ്പ്യൂട്ടർ പ്രശ്നങ്ങൾ ലിസ്റ്റിൽ നിന്ന് തിരഞ്ഞെടുക്കുക വിൻഡോസ് പുതുക്കല്.
4. ഓൺ-സ്ക്രീൻ നിർദ്ദേശങ്ങൾ പാലിച്ച് വിൻഡോസ് അപ്ഡേറ്റ് ട്രബിൾഷൂട്ട് പ്രവർത്തിപ്പിക്കാൻ അനുവദിക്കുക.
5. നിങ്ങളുടെ പിസി പുനരാരംഭിച്ച് നിങ്ങൾക്ക് കഴിയുമോ എന്ന് നോക്കുക fix Windows Update Error 80246008.
Method 4: Reset Windows Update Components
1. തുറക്കുക കമാൻഡ് പ്രോംപ്റ്റ്. തിരയുന്നതിലൂടെ ഉപയോക്താവിന് ഈ ഘട്ടം നിർവഹിക്കാൻ കഴിയും 'cmd' തുടർന്ന് എന്റർ അമർത്തുക.
2. Type the following command into cmd and hit Enter after each one:
നെറ്റ് സ്റ്റോപ്പ് ബിറ്റുകൾ
നെറ്റ് സ്റ്റോപ്പ് വൂസർസേ
നെറ്റ് സ്റ്റോപ്പ് appidsvc
നെറ്റ് സ്റ്റോപ്പ് cryptsvc
3. Delete the qmgr*.dat files, to do this again open cmd and type:
Del “%ALLUSERSPROFILE%Application DataMicrosoftNetworkDownloaderqmgr*.dat”
4. Type the following into cmd and hit Enter:
cd /d %windir%system32
5. Reregister the BITS files and the Windows Update files. Type each of the following commands individually in cmd and hit Enter after each one:
regsvr32.exe atl.dll regsvr32.exe urlmon.dll regsvr32.exe mshtml.dll regsvr32.exe shdocvw.dll regsvr32.exe browseui.dll regsvr32.exe jscript.dll regsvr32.exe vbscript.dll regsvr32.exe scrrun.dll regsvr32.exe msxml.dll regsvr32.exe msxml3.dll regsvr32.exe msxml6.dll regsvr32.exe actxprxy.dll regsvr32.exe softpub.dll regsvr32.exe wintrust.dll regsvr32.exe dssenh.dll regsvr32.exe rsaenh.dll regsvr32.exe gpkcsp.dll regsvr32.exe sccbase.dll regsvr32.exe slbcsp.dll regsvr32.exe cryptdlg.dll regsvr32.exe oleaut32.dll regsvr32.exe ole32.dll regsvr32.exe shell32.dll regsvr32.exe initpki.dll regsvr32.exe wuapi.dll regsvr32.exe wuaueng.dll regsvr32.exe wuaueng1.dll regsvr32.exe wucltui.dll regsvr32.exe wups.dll regsvr32.exe wups2.dll regsvr32.exe wuweb.dll regsvr32.exe qmgr.dll regsvr32.exe qmgrprxy.dll regsvr32.exe wucltux.dll regsvr32.exe muweb.dll regsvr32.exe wuwebv.dll
6. To reset Winsock:
നെറ്റ്ഷ് വിൻസ്കോക്ക് റീസെറ്റ്
7. Reset the BITS service and the Windows Update service to the default security descriptor:
sc.exe sdset ബിറ്റുകൾ D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDClCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;;
sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDClCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWLOCRRC;;;;;;
8. Again start the Windows update services:
നെറ്റ് ആരംഭ ബിറ്റുകൾ
നെറ്റ് തുടക്കം wuauserv
നെറ്റ് സ്റ്റാർട്ട് appidsvc
നെറ്റ് സ്റ്റാർട്ട് cryptsvc
9. Install the latest വിൻഡോസ് അപ്ഡേറ്റ് ഏജന്റ്.
10. Reboot your PC and see if you’re able to fix the issue.
ശുപാർശ ചെയ്ത:
അതാണ് നിങ്ങൾ വിജയകരമായി പൂർത്തിയാക്കിയത് Fix Windows Update Error 80246008 എന്നാൽ ഈ ഗൈഡിനെക്കുറിച്ച് നിങ്ങൾക്ക് ഇപ്പോഴും എന്തെങ്കിലും ചോദ്യങ്ങൾ ഉണ്ടെങ്കിൽ, അഭിപ്രായ വിഭാഗത്തിൽ അവരോട് ചോദിക്കാൻ മടിക്കേണ്ടതില്ല.