If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
വിൻഡോസ് 10-ൽ നെറ്റ്വർക്ക് അഡാപ്റ്റർ നഷ്ടമായി പരിഹരിക്കുക
എന്തെങ്കിലും തെറ്റ് സംഭവിച്ചാൽ ഒരു പുനഃസ്ഥാപിക്കൽ പോയിൻ്റ് സൃഷ്ടിക്കുന്നത് ഉറപ്പാക്കുക.
Method 1: Reboot your Computer
Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.
1. അതിൽ ക്ലിക്ക് ചെയ്യുക മെനു ആരംഭിക്കുക തുടർന്ന് അതിൽ ക്ലിക്കുചെയ്യുക പവർ ബട്ടൺ താഴെ ഇടത് മൂലയിൽ ലഭ്യമാണ്.
2. അടുത്തതായി, ക്ലിക്ക് ചെയ്യുക പുനരാരംഭിക്കുക ഓപ്ഷൻ, നിങ്ങളുടെ കമ്പ്യൂട്ടർ സ്വയം പുനരാരംഭിക്കും.
കമ്പ്യൂട്ടർ പുനരാരംഭിച്ച ശേഷം, നിങ്ങളുടെ പ്രശ്നം പരിഹരിച്ചോ ഇല്ലയോ എന്ന് പരിശോധിക്കുക.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. ഇപ്പോൾ താഴെ പറയുന്ന കമാൻഡ് ടൈപ്പ് ചെയ്ത് ഓരോന്നിനും ശേഷം എൻ്റർ അമർത്തുക:
ipconfig / release ipconfig / flushdns ipconfig / പുതുക്കുക
3. Again open Command Prompt and type the following command one by one and hit enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip റീസെറ്റ് netsh winsock റീസെറ്റ്
4. മാറ്റങ്ങൾ പ്രയോഗിക്കാൻ റീബൂട്ട് ചെയ്യുക. DNS ഫ്ലഷ് ചെയ്യുന്നതായി തോന്നുന്നു Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക സെര്വിചെസ്.മ്സ്ച് Enter അമർത്തുക.
2. കണ്ടെത്തുക WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. ഡബിൾ ക്ലിക്ക് ചെയ്യുക WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select ഓട്ടോമാറ്റിക്.
5. Click Apply followed by OK.
6. വലത്-ക്ലിക്കുചെയ്യുക WWAN AutoConfig Service തെരഞ്ഞെടുക്കുക ആരംഭിക്കുക.
രീതി 4: നെറ്റ്വർക്ക് അഡാപ്റ്റർ ഡ്രൈവറുകൾ അപ്ഡേറ്റ് ചെയ്യുക
1. Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open ഉപകരണ മാനേജർ.
2. വികസിപ്പിക്കുക നെറ്റ്വർക്ക് അഡാപ്റ്ററുകൾ, തുടർന്ന് നിങ്ങളുടേതിൽ റൈറ്റ് ക്ലിക്ക് ചെയ്യുക Wi-Fi കൺട്രോളർ (ഉദാഹരണത്തിന് ബ്രോഡ്കോം അല്ലെങ്കിൽ ഇൻ്റൽ) തിരഞ്ഞെടുക്കുക ഡ്രൈവർ സോഫ്റ്റ്വെയർ അപ്ഡേറ്റ് ചെയ്യുക.
3. ഇപ്പോൾ തിരഞ്ഞെടുക്കുക "Search for automatically for updated driver software".
4. ഇപ്പോൾ Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. Once finished, close everything and reboot your PC.
6. If you’re still facing the Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select ഡ്രൈവർ പരിഷ്കരിക്കുക ഉപകരണ മാനേജറിൽ.
7. Now, in the Update Driver Software Windows, select “ഡ്രൈവർ സോഫ്റ്റ്വെയറിനായി എന്റെ കമ്പ്യൂട്ടർ ബ്രൌസ് ചെയ്യുക."
8. ഇപ്പോൾ തിരഞ്ഞെടുക്കുക "എൻ്റെ കമ്പ്യൂട്ടറിൽ ലഭ്യമായ ഡ്രൈവറുകളുടെ ഒരു ലിസ്റ്റിൽ നിന്ന് ഞാൻ തിരഞ്ഞെടുക്കട്ടെ."
9. ശ്രമിക്കുക update drivers from the listed versions (make sure to checkmark compatible hardware).
10. If the above didn’t work then go to നിർമ്മാതാവിൻ്റെ വെബ്സൈറ്റ് ഡ്രൈവറുകൾ അപ്ഡേറ്റുചെയ്യാൻ.
11. Download and install the latest driver from the manufacturer’s website then restart your PC.
Method 5: Uninstall Network Adapter Drivers
1. വിൻഡോസ് കീ + ആർ അമർത്തുക, തുടർന്ന് " എന്ന് ടൈപ്പ് ചെയ്യുകdevmgmt.msc”, ഉപകരണ മാനേജർ തുറക്കാൻ എൻ്റർ അമർത്തുക.
2. Expand Network Adapters and find നിങ്ങളുടെ നെറ്റ്വർക്ക് അഡാപ്റ്ററിൻ്റെ പേര്.
3. നിങ്ങൾ ഉറപ്പാക്കുക അഡാപ്റ്ററിൻ്റെ പേര് ശ്രദ്ധിക്കുക എന്തെങ്കിലും തെറ്റ് സംഭവിച്ചാൽ.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation അതെ തിരഞ്ഞെടുക്കുക.
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on ആക്ഷൻ എന്നിട്ട് " ക്ലിക്ക് ചെയ്യുകഹാർഡ്വെയർ മാറ്റങ്ങൾ സ്കാൻ ചെയ്യുക".
രീതി 6: വിൻഡോസ് കാലികമാണെന്ന് ഉറപ്പാക്കുക
1. അമർത്തുക വിൻഡോസ് കീ + ക്രമീകരണങ്ങൾ തുറക്കാൻ ഞാൻ ക്ലിക്ക് ചെയ്യുക അപ്ഡേറ്റും സുരക്ഷയും.
2. From the left-hand side, menu click on വിൻഡോസ് പുതുക്കല്.
3. ഇപ്പോൾ ക്ലിക്ക് ചെയ്യുക "അപ്ഡേറ്റുകൾക്കായി പരിശോധിക്കുകലഭ്യമായ അപ്ഡേറ്റുകൾ പരിശോധിക്കാൻ ” ബട്ടൺ.
4. If any updates are pending then click on അപ്ഡേറ്റുകൾ ഡൗൺലോഡ് ചെയ്ത് ഇൻസ്റ്റാൾ ചെയ്യുക.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
രീതി 7: നെറ്റ്വർക്ക് അഡാപ്റ്റർ ട്രബിൾഷൂട്ടർ പ്രവർത്തിപ്പിക്കുക
1. ക്രമീകരണങ്ങൾ തുറക്കാൻ വിൻഡോസ് കീ + I അമർത്തുക, തുടർന്ന് ക്ലിക്കുചെയ്യുക അപ്ഡേറ്റും സുരക്ഷയും.
2. From the left-hand menu select ട്രബിൾഷൂട്ട് ചെയ്യുക.
3. Under Troubleshoot click on ഇന്റർനെറ്റ് കണക്ഷനുകൾ തുടർന്ന് ക്ലിക്കുചെയ്യുക ട്രബിൾഷൂട്ടർ പ്രവർത്തിപ്പിക്കുക.
4. Follow further on-screen instructions to run the troubleshooter.
5. If the above didn’t fix the issue then from the Troubleshoot window, click on നെറ്റ്വർക്ക് അഡാപ്റ്റർ തുടർന്ന് ക്ലിക്കുചെയ്യുക ട്രബിൾഷൂട്ടർ പ്രവർത്തിപ്പിക്കുക.
5. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക, നിങ്ങൾക്ക് കഴിയുമോ എന്ന് നോക്കുക fix the Network Adapter Missing issue.
രീതി 8: Intel PROSet/Wireless Software ഇൻസ്റ്റാൾ ചെയ്യുക
കാലഹരണപ്പെട്ട ഇൻ്റൽ പ്രോസെറ്റ് സോഫ്റ്റ്വെയർ മൂലമാണ് ചിലപ്പോൾ പ്രശ്നം ഉണ്ടാകുന്നത്, അതിനാൽ ഇത് അപ്ഡേറ്റ് ചെയ്യുന്നത് fix Network Adapter Missing in Windows 10 issue. അതുകൊണ്ടു, ഇവിടെ വരൂ കൂടാതെ PROSet/Wireless Software-ൻ്റെ ഏറ്റവും പുതിയ പതിപ്പ് ഡൗൺലോഡ് ചെയ്ത് ഇൻസ്റ്റാൾ ചെയ്യുക. വിൻഡോസിന് പകരം നിങ്ങളുടെ വൈഫൈ കണക്ഷൻ നിയന്ത്രിക്കുന്ന ഒരു മൂന്നാം കക്ഷി സോഫ്റ്റ്വെയറാണിത്, പ്രോസെറ്റ്/വയർലെസ് സോഫ്റ്റ്വെയർ കാലഹരണപ്പെട്ടതാണെങ്കിൽ ഡ്രൈവർ പ്രശ്നങ്ങൾ ഉണ്ടാക്കാം വയർലെസ് നെറ്റ്വർക്ക് അഡാപ്റ്റർ. Hence, read How to Update Network Adapter Drivers on Windows 10.
രീതി 9: നെറ്റ്വർക്ക് കണക്ഷൻ പുനഃസജ്ജമാക്കുക
1. ക്രമീകരണങ്ങൾ തുറക്കാൻ വിൻഡോസ് കീ + I അമർത്തുക, തുടർന്ന് ക്ലിക്കുചെയ്യുക നെറ്റ്വർക്കും ഇന്റർനെറ്റും.
2. From the left-hand menu select പദവി.
3. Now scroll down and click on നെറ്റ്വർക്ക് റീസെറ്റ് ചെയ്യുക താഴെ.
4. വീണ്ടും “ഇപ്പോൾ പുന et സജ്ജമാക്കുക” under Network reset section.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
രീതി 10: ഒരു സിസ്റ്റം വീണ്ടെടുക്കൽ നടത്തുക
System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. വിൻഡോസ് കീ + X അമർത്തുക, തുടർന്ന് തിരഞ്ഞെടുക്കുക കമാൻഡ് പ്രോംപ്റ്റ് (അഡ്മിൻ).
2. താഴെ പറയുന്ന കമാൻഡ് cmd-ൽ ടൈപ്പ് ചെയ്ത് എൻ്റർ അമർത്തുക:
netcfg -sn
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg HKCRCLSID ഇല്ലാതാക്കുക {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u dni_dne
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക regedit Enter അമർത്തുക.
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u dni_dne command in cmd.
10. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക.
നിങ്ങൾക്കായി ശുപാർശ ചെയ്തത്:
അതാണ് നിങ്ങൾ വിജയകരമായി പൂർത്തിയാക്കിയത് വിൻഡോസ് 10-ൽ നെറ്റ്വർക്ക് അഡാപ്റ്റർ നഷ്ടമായി പരിഹരിക്കുക എന്നാൽ ഈ പോസ്റ്റിനെക്കുറിച്ച് നിങ്ങൾക്ക് ഇപ്പോഴും എന്തെങ്കിലും ചോദ്യങ്ങളുണ്ടെങ്കിൽ, അഭിപ്രായ വിഭാഗത്തിൽ അവരോട് ചോദിക്കാൻ മടിക്കേണ്ടതില്ല.