When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Хуучирсан үйлдлийн систем.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe дүрс.
2. If the status is set to Холбогдоогүйдээр дарна уу Network globe icon, choose your Wi-Fi network and click on холбоно button. Make sure Нислэгийн горим асаагүй байна.
3. If you again face the same network connection error code, then click on the Таслах button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. дээр хулганы баруун товчийг дарна уу Wi-Fi дүрс сонгох Open Network & Internet settings.
6. Дээр товшино уу Wi-Fi.
7. Scroll down the right menu, click on Мэдэгдэж буй сүлжээг удирдах.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Март.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Арга 2: Чиглүүлэгчийг дахин эхлүүлнэ үү
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Тайлбар: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1 дугаартай. Хайх Асаах товч at the back of your router.
2. Press the button once to унтраа.
3. Одоо, салгах Таны Router power cable ба конденсаторуудаас хүчийг бүрэн шавхах хүртэл хүлээнэ үү.
4. Дараа нь, дахин холбох олон тоо цахилгаан кабель минутын дараа асаана уу.
5. Wait until the network connection is re-established and try signing in again.
Мөн уншина уу: Fix Computers Not Showing Up on Network in Windows 10
Арга 3: Сүлжээний алдааг олж засварлах хэрэгслийг ажиллуулна уу
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. дарна уу Windows түлхүүр болон бичнэ үү Тохиргоог олж засварлаж засварлана уу хайлтын мөрөнд ба Нээлттэй байна.
2. Дээр товшино уу Алдааг олж засварлах нэмэлт хэрэгсэл.
3. Сонгох Сүлжээний адаптер дээр дарна уу Аюулгүй байдлыг ажиллуулна уу.
4. Select the network adapter to diagnose дээр дарна уу Дараа нь.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, дээр товшино уу Асуудал шийдвэрлэгчийг хаах.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Мөн уншина уу: Гэр бүлээрээ хуваалцах YouTube ТВ ажиллахгүй байгааг засна уу
Арга 4: Системийн файлуудыг засах
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Системийн файлын шалгагч) /DISM (Хөдөлгөөнт зураглал ба менежмент) utilities on your Windows 10 PC.
1. дарна уу Windows түлхүүр, төрөл Коммандын шугам дээр дарна уу Администратороор ажиллуул.
2. Дээр товшино уу Тийм дахь Хэрэглэгчийн дансны хяналт түр хүлээх.
3. Төрөл chkdsk C: / f / r / x тушаал өгөөд цохино Түлхүүрийг оруулна уу.
4. Хэрэв танд мессеж ирэх бол, Chkdsk ажиллаж чадахгүй байна ... эзлэхүүн нь ... ашиглаж байна, дараа нь бичнэ үү Y болон Түлхүүрийг оруулна уу.
5. Дахин тушаалыг бичнэ үү: sfc / scannow болон дар Түлхүүрийг оруулна уу нь ажиллуулах Системийн файлын шалгагч скан хийх.
Тайлбар: Системийн хайлтыг эхлүүлэх бөгөөд дуусгахад хэдэн минут болно. Үүний зэрэгцээ та бусад үйлдлүүдийг үргэлжлүүлэн хийж болно, гэхдээ цонхыг санамсаргүйгээр хааж болохгүй.
Скан хийж дууссаны дараа эдгээр мессежүүдийн аль нэгийг харуулах болно:
- Windows нөөцийн хамгаалалт нь бүрэн бүтэн байдлыг зөрчөөгүй.
- Windows нөөцийн хамгаалалт хүссэн үйлдлийг гүйцэтгэж чадсангүй.
- Windows нөөцийн хамгаалалт нь эвдэрсэн файлуудыг олж, амжилттай зассан.
- Windows нөөцийн хамгаалалт нь эвдэрсэн файлуудыг олсон боловч заримыг нь засч чадаагүй.
6. Скан хийж дууссаны дараа, дахин ачааллах таны компьютер.
7. Дахин хэлэхэд эхлүүлэх Администратор гэж Command Prompt өгөгдсөн тушаалуудыг ар араас нь гүйцэтгэнэ:
dism.exe /Онлайн /цэвэрлэх зураг /scanhealth dism.exe /Онлайн /цэвэрлэх дүрс /эрүүл мэндийг сэргээх dism.exe /Онлайн /cleanup-image /startcomponentcleanup
Тайлбар: DISM тушаалуудыг зөв гүйцэтгэхийн тулд та интернетийн холболттой байх ёстой.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. дарна уу Windows түлхүүр болон бичнэ үү Төхөөрөмжийн менежер in the Windows search menu. Click on Нээлттэй.
2. -г өргөжүүлнэ үү Сүлжээний хувиргагчид хэсэг дээр давхар товшино уу.
3. Өөрийн гэсэн дээр хулганы баруун товчийг дарна уу Сүлжээний драйвер (Жишээлбэл, Intel (R) Dual Band Wireless-AC 3168) Гэж сонгоод Төхөөрөмжийг идэвхгүй болгох сонголт.
4. Confirm the below prompt by clicking on Тийм.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Төхөөрөмжийг идэвхжүүл сонголт.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Мөн уншина уу: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Хайлтын цэс рүү ороод бичнэ үү cmd. Дээр товшино уу Администратороор ажиллуул.
2. Дараахыг бичнэ үү тушаалууд болон Түлхүүрийг оруулна уу.
netsh winsock дахин эхлүүлэх netsh int ip reset ipconfig / release ipconfig / шинэчлэх
3. Командуудыг гүйцэтгэхийг хүлээнэ үү компьютерээ дахин ачаална уу.
Арга 7: DNS кэшийг цэвэрлэх
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Эхлэх Коммандын шугам by searching in the Windows цэс and click on Run as administrator.
2. Төрөл ipconfig / flushdns командын цонхонд дарна уу оруулна уу.
Мөн уншина уу: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. -г ажиллуулна уу Run дарж харилцах цонх Windows + R товчлуурууд Хамтдаа.
2. Төрөл ncpa.cpl болон цохих Түлхүүрийг оруулна уу.
3. Right-click on your active сүлжээний адаптер дээр дарна уу Үл хөдлөх хөрөнгө.
4. Сонголтыг арилга Интернет протоколын хувилбар 6 (TCP / IPv6) сонголт.
5. Эцэст нь дээр дарна уу OK to save the changes and check if the issue is resolved.
Тайлбар: If you use multiple network connections, navigate to Сүлжээ ба Хуваалцах төв болон Тохируулагчийг өөрчлөх settings. Right-click on the adapter and select Идэвхгүй болгох. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Төрөл Төхөөрөмжийн менежер in the Windows search menu and click Нээлттэй.
2. дээр давхар товш Сүлжээний хувиргагчид өргөжүүлэх.
3. Өөрийн гэсэн дээр хулганы баруун товчийг дарна уу Драйвер (жишээ нь Intel(R) хос зурвасын утасгүй-AC 3168) товшино уу Драйверийг шинэчлэх.
4. Дээр товшино уу Жолооч нарт зориулж миний компьютерийг үзэх драйверийг гараар олж суулгах.
5. Дээр дарна уу Хөтөч button to choose any directory and click on Дараа нь.
5A. The drivers will be updated to the latest version if they are not updated.
5Б. Хэрэв тэд аль хэдийн шинэчлэгдсэн шатанд байгаа бол дэлгэцэн дээр дараах мессеж гарч ирнэ. Таны төхөөрөмжийн хамгийн сайн драйверуудыг аль хэдийн суулгасан байна.
6. Дээр товшино уу Хаах цонхноос гарах.
7. Дахин ачааллах the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Эхлэх Төхөөрөмжийн менежер from the Windows search menu.
2. дээр хулганы баруун товчийг дарна уу Драйвер сонгох Төхөөрөмжийг устгах.
3. A warning prompt will be displayed on the screen. Check the box “Энэ төхөөрөмжийн драйвер програмыг устгах” and confirm the prompt by clicking Устгах.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. зочилно уу үйлдвэрлэгчийн вэбсайт.
2. хай болон Татаж авах таны компьютер дээрх Windows хувилбарт тохирох драйверууд.
3. Татаж авсны дараа дээр давхар товшино уу татаж авсан файл өгөгдсөн зааврыг дагаж суулгана уу.
Мөн уншина уу: Windows 10 дээр VPN хэрхэн тохируулах талаар
Арга 10: Windows-г шинэчлэх
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1 дугаартай. Дар Windows + би түлхүүрүүд хамтдаа нээх Тохиргоо таны компьютер дээр.
2. Сонгох Шинэчлэлт ба аюулгүй байдал.
3. Сонгох Шинэчлэлтүүдийг шалгах.
4A. Click Одоо суулгах to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Та шинэчлэгдсэн байна Захиа.
Арга 11: Сүүлийн үеийн шинэчлэлтүүдийг устгах
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Дарна уу Windows + R товчлуурууд нээхийн тулд хамтдаа Run харилцах цонх.
2. Төрөл appwiz.cpl болон цохих оруулна уу.
3. Дээр товшино уу Суулгасан шинэчлэлтүүдийг харах.
4. Select the most recent update and click on Устгах.
5. Confirm the prompt, if any, and компьютерээ дахин ачаална уу.
Мөн уншина уу: Firefox хуудас ачаалахгүй байгааг хэрхэн засах вэ
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Тайлбар: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Тохиргоо дараа нь систем болон Тухай. Once you have reset your network, you have to reinstall all networking software шиг VPN үйлчлүүлэгчид or Виртуал шилжүүлэгч.
1. Дарна уу Windows + I товчлуурууд хамтдаа нээх Windows тохиргоо.
2. Дээр товшино уу Сүлжээ ба интернет.
3. Дээр товшино уу Сүлжээг дахин тохируулах дор байдал.
4. дээр дарж хүсэлтийг баталгаажуулна уу Одоо дахин тохируулна уу.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Зөвлөмж:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.