Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Дахин ачаалж, зөв ачаалах төхөөрөмжийг сонгоно уу [ШИЙДСЭН]
Method 1: Set Correct Boot Order
Та алдааг харж байж магадгүй "Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Таны компьютер эхлэхэд (Ачаалах дэлгэц эсвэл алдаа гарахын өмнө) Устгах эсвэл F1 эсвэл F2 товчийг (таны компьютерийн үйлдвэрлэгчээс хамаарч) дахин дахин дарна уу. BIOS тохиргоог оруулна уу.
2. BIOS тохиргоонд орсны дараа сонголтуудын жагсаалтаас Boot tab-г сонгоно уу.
3.Одоо компьютер байгаа эсэхийг шалгаарай Хатуу диск эсвэл SSD Ачаалах дараалалд тэргүүлэх ач холбогдол өгдөг. Хэрэв тийм биш бол хатуу дискийг дээд талд нь суулгахын тулд дээш эсвэл доош сумыг ашиглана уу, энэ нь компьютер өөр эх үүсвэрээс бус эхлээд түүнээс ачаалах болно гэсэн үг юм.
4. Эцэст нь F10 товчийг дарж энэхүү өөрчлөлтийг хадгалаад гарна. Энэ байх ёстой Fix Reboot and Select Proper Boot Device Issue, үгүй бол үргэлжлүүлнэ үү.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Оношлогоог ажиллуулахын тулд компьютераа дахин эхлүүлж, компьютер асах үед (ачаалах дэлгэц гарч ирэхээс өмнө) F12 товчийг дарж, Ачаалах цэс гарч ирэхэд Boot to Utility Partition буюу Оношилгооны сонголтыг сонгоод enter дарж оношилгоог эхлүүлнэ. Энэ нь таны системийн бүх техник хангамжийг автоматаар шалгаж, ямар нэгэн асуудал илэрсэн тохиолдолд эргэн мэдээлэх болно.
Зөвлөмж: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Анхаарах зүйл: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Windows 10 ачаалах боломжтой суулгах DVD-г оруулаад компьютерээ дахин эхлүүлнэ үү.
2. CD эсвэл DVD-ээс ачаалахын тулд дурын товчлуур дээр дарж үргэлжлүүлэхийн тулд дурын товчлуурыг дарна уу.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Дахин эхлүүлснээр амжилттай боллоо Fix Reboot and Select Proper Boot Device issue, if not, continue.
Мөн автомат засвар нь таны компьютерийг засч чадаагүйг хэрхэн засах талаар уншина уу.
Method 5: Enable UEFI Boot
1. Компьютерээ дахин асаагаад компьютерээсээ хамааран F2 эсвэл DEL дээр дарж ачаалах тохиргоог нээнэ үү.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Тайлбар: Системийн нөөцлөгдсөн хуваалтыг (ерөнхийдөө 100mb) идэвхтэй гэж тэмдэглээрэй, хэрэв танд Системийн нөөцлөгдсөн хуваалт байхгүй бол C: Drive-ыг идэвхтэй хуваалт гэж тэмдэглээрэй.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Арга 7: Windows 10-г засах
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Ингэснээр та амжилттай байна Үзнэ үү Reboot and Select proper Boot device issue гэхдээ танд энэ нийтлэлийн талаар асуух зүйл байвал коммент хэсэгт асуугаарай.