Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Betulkan kod Ralat 0x80070035 Laluan rangkaian tidak ditemui
Pastikan anda membuat titik pemulihan sekiranya berlaku masalah.
Kaedah 1: Lumpuhkan Antivirus dan Firewall buat sementara waktu
1.Klik kanan pada Ikon Program Antivirus daripada dulang sistem dan pilih Lumpuhkan.
2.Seterusnya, pilih rangka masa yang Antivirus akan kekal dilumpuhkan.
Nota: Pilih jumlah masa terkecil yang mungkin contohnya 15 minit atau 30 minit.
3.Once done, again check if the error resolves or not.
4.Tekan Windows Key + I kemudian pilih Panel Kawalan.
5.Seterusnya, klik pada Sistem dan keselamatan.
6. Kemudian klik pada Windows Firewall.
7. Sekarang dari anak tetingkap kiri klik pada Hidupkan atau matikan Windows Firewall.
8.Pilih Matikan Windows Firewall dan mulakan semula PC anda. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Jika kaedah di atas tidak berfungsi pastikan anda mengikuti langkah yang sama untuk menghidupkan Firewall anda semula.
Method 2: Delete Hidden Network Adapters
1.Tekan Windows Key + R kemudian taip devmgmt.msc dan tekan Enter untuk membuka Pengurus peranti.
2. Sekarang pilih Adapter Rangkaian Dan kemudian klik Lihat> Tunjukkan peranti tersembunyi.
3.Right-click on each of the hidden devices and select Nyahpasang peranti.
4.Do this for all the hidden devices listed under Network Adapters.
5.But semula PC anda untuk menyimpan perubahan.
Method 3: Turn ON Network Discovery
1.Tekan Windows Key + X kemudian pilih Panel Kawalan.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings daripada menu sebelah kiri.
4.Check mark Hidupkan penemuan rangkaian and click Save changes.
5.But semula PC anda untuk menyimpan perubahan dan lihat jika anda mampu Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1.Tekan Windows Key + R kemudian taip ncpa.cpl dan tekan Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select Sifat.
3.Select Versi Protokol Internet 4 (TCP / IPv4) dan klik Properties.
4. Sekarang klik Maju in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Dayakan NetBIOS melalui TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1.Tekan Windows Key + X kemudian pilih Panel Kawalan.
2.Jenis Tauliah in the control panel search and click on Pengurus kelayakan.
3.Select Bukti kelayakan Windows dan kemudian klik Add a Windows credential.
4.One by one type the nama pengguna dan kata laluan of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Sifat.
2.Tukar kepada Tab Perkongsian and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “Kongsi folder ini” and make sure the Share name is correct.
4.Klik Apply diikuti dengan OK.
Method 7: Change Network Security settings
1.Tekan Windows Key + R kemudian taip secpol.msc dan tekan Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3.Klik dua kali pada Keselamatan rangkaian: Tahap pengesahan Pengurus LAN in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5.Klik Apply diikuti dengan OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Kaedah 8: Tetapkan semula TCP / IP
1.Klik kanan pada Butang Windows dan pilih “Prompt Perintah (Admin)."
2. Sekarang taip arahan berikut dan tekan enter selepas setiap satu:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3. Sekali lagi buka Admin Command Prompt dan taip yang berikut dan tekan enter selepas setiap satu:
- ipconfig / flushdns
- nbtstat –r
- int reset netsh
- reset netsh winsock
4.But semula untuk menggunakan perubahan.
Disyorkan untuk anda:
Itu sahaja yang anda telah berjaya Betulkan kod Ralat 0x80070035 Laluan rangkaian tidak ditemui tetapi jika anda masih mempunyai sebarang soalan mengenai siaran ini, sila tanya mereka di bahagian komen.