When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikon.
2. If the status is set to Tidak bersambung, Klik pada Network globe icon, choose your Wi-Fi network and click on Hubungi button. Make sure Mod kapal terbang tidak dihidupkan.
3. If you again face the same network connection error code, then click on the Putuskan sambungan button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Klik kanan pada Ikon Wi-Fi dan pilih Open Network & Internet settings.
6. Klik pada Wi-Fi.
7. Scroll down the right menu, click on Mengurus rangkaian yang diketahui.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Lupakan.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Kaedah 2: Mulakan semula Penghala
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Catatan: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Cari Butang kuasa at the back of your router.
2. Press the button once to tutupkan.
3. Sekarang, cabut Matlamat Router power cable dan tunggu sehingga kuasa disalirkan sepenuhnya daripada kapasitor.
4. Kemudian, menyambung semula yang kabel kuasa dan hidupkannya selepas seminit.
5. Wait until the network connection is re-established and try signing in again.
Juga Baca: Fix Computers Not Showing Up on Network in Windows 10
Kaedah 3: Jalankan Penyelesai Masalah Rangkaian
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Tekan Kunci Windows dan jenis Selesaikan tetapan di bar carian dan Buka.
2. Klik pada Penyelesai masalah tambahan.
3. Pilih Network Adapter dan klik pada Jalankan penyelesai masalah.
4. Select the network adapter to diagnose dan klik pada Seterusnya.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Klik pada Tutup penyelesai masalah.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Juga Baca: Betulkan Perkongsian Keluarga YouTube TV Tidak Berfungsi
Kaedah 4: Membaiki Fail Sistem
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Pemeriksa Fail Sistem) /DISM (Penempatan Pengurusan dan Pengurusan Imej) utilities on your Windows 10 PC.
1. Tekan Kunci Windows, jenis Command Prompt dan klik pada Jalankan sebagai pentadbir.
2. Klik pada Ya dalam Kawalan Akaun Pengguna segera.
3. Taipkan chkdsk C: / f / r / x arahan dan pukul Masukkan kunci.
4. Jika anda digesa dengan mesej, Chkdsk tidak boleh dijalankan… volum sedang… dalam proses penggunaan, kemudian, taip Y dan memukul Masukkan kunci.
5. Sekali lagi, taip arahan: sfc / scannow dan tekan Masukkan kunci untuk menjalankan Pemeriksa Fail Sistem imbas.
Catatan: Imbasan sistem akan dimulakan dan ia akan mengambil masa beberapa minit untuk diselesaikan. Sementara itu, anda boleh terus melakukan aktiviti lain tetapi berhati-hati untuk tidak menutup tetingkap secara tidak sengaja.
Selepas melengkapkan imbasan, ia akan menunjukkan salah satu daripada mesej ini:
- Perlindungan Sumber Windows tidak menemui pelanggaran integriti.
- Perlindungan Sumber Windows tidak dapat melaksanakan operasi yang diminta.
- Windows Resource Protection menemui fail yang rosak dan berjaya membaikinya.
- Perlindungan Sumber Windows menemui fail yang rosak tetapi tidak dapat membetulkan sebahagian daripadanya.
6. Setelah imbasan selesai, restart PC anda.
7. Sekali lagi, lancarkan Prompt Command sebagai pentadbir dan laksanakan arahan yang diberikan satu demi satu:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Catatan: Anda mesti mempunyai sambungan internet yang berfungsi untuk melaksanakan perintah DISM dengan betul.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Tekan Kunci Windows dan jenis Pengurus peranti in the Windows search menu. Click on Buka.
2. Kembangkan Penyesuai rangkaian bahagian dengan mengklik dua kali padanya.
3. Klik kanan pada anda Pemacu rangkaian (sebagai contoh, Intel (R) Dual Band Wireless-AC 3168) Dan pilih Lumpuhkan peranti pilihan.
4. Confirm the below prompt by clicking on Ya.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Dayakan peranti pilihan.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Juga Baca: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Pergi ke menu carian dan taip cmd. Klik pada Jalankan sebagai pentadbir.
2. Taip yang berikut arahan dan memukul Masukkan kunci.
reset netsh winsock int reset netsh ipconfig / release ipconfig / renew
3. Tunggu arahan untuk dilaksanakan dan but semula PC anda.
Kaedah 7: Siram Cache DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Pelancaran Command Prompt by searching in the Windows menu and click on Run as administrator.
2. Taipkan ipconfig / flushdns in the command window and hit Masukkan.
Juga Baca: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Pelancaran Main kotak dialog dengan menekan Kekunci Windows + R bersama-sama.
2. Taipkan ncpa.cpl dan tekan Masukkan kunci.
3. Right-click on your active penyesuai rangkaian dan klik pada Hartanah.
4. Nyahtanda pada Internet Protocol Version 6 (TCP / IPv6) pilihan.
5. Akhir sekali, klik pada OK to save the changes and check if the issue is resolved.
Catatan: If you use multiple network connections, navigate to Pusat rangkaian dan Perkongsian and Tukar penyesuai settings. Right-click on the adapter and select Lumpuhkan. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Taipkan Pengurus peranti in the Windows search menu and click Buka.
2. Klik dua kali pada Penyesuai rangkaian untuk mengembangkannya.
3. Klik kanan pada anda pemandu (contohnya Intel (R) Dual Band Wireless-AC 3168) dan klik Kemas kini pemandu.
4. Klik pada Layari komputer saya untuk pemacu to locate and install a driver manually.
5. Klik pada pelayar button to choose any directory and click on Seterusnya.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Pemacu terbaik untuk peranti anda sudah dipasang.
6. Klik pada Tutup untuk keluar dari tingkap.
7. restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Pelancaran Pengurus peranti from the Windows search menu.
2. Klik kanan pada pemandu dan pilih Nyahpasang peranti.
3. A warning prompt will be displayed on the screen. Check the box “Padamkan perisian pemacu untuk peranti ini” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Lawati laman web pengeluar.
2. Cari and muat turun pemacu yang sepadan dengan versi Windows pada PC anda.
3. Once downloaded, double click on the fail yang dimuat turun and follow the given instructions to install it.
Juga Baca: How to set up a VPN on Windows 10
Kaedah 10: Kemas kini Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Tekan butang Windows+I kunci bersama untuk membuka Tetapan pada komputer anda.
2. Pilih Kemas kini & Keselamatan.
3. Pilih Menyemak kemas kini.
4A. Click Pasang sekarang untuk memuat turun dan memasang kemas kini terkini yang tersedia.
4B. Jika sistem anda sudah dikemas kini, maka ia akan dipaparkan Anda terkini mesej.
Kaedah 11: Nyahpasang Kemas Kini Terkini
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Tekan dan tahan Kekunci Windows + R bersama-sama membuka Main kotak dialog.
2. Taipkan appwiz.cpl dan tekan Masukkan.
3. Klik pada Lihat dipasang kemas kini.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and but semula PC.
Juga Baca: Cara Membetulkan Firefox Tidak Memuatkan Halaman
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the penyesuai rangkaian installed in your PC along with their settings. All the stored settings are stored to default settings.
Catatan: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Tetapan kemudian sistem and Info. Once you have reset your network, you have to reinstall all networking software seperti Pelanggan VPN or Suis maya.
1. Tekan dan tahan Kekunci Windows + I bersama untuk membuka Tetapan Windows.
2. Klik pada Rangkaian & Internet.
3. Klik pada Rangkaian set semula di bawah status.
4. Sahkan gesaan dengan mengklik pada Tetapkan semula sekarang.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Lawatan:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.