After installing the latest Windows feature update, your PC may be trapped in an automated repair cycle. This article will give you various troubleshooting techniques if you’re attempting to locate a repair approach that will allow you to resolve diagnosing your PC Windows 10 issue. So, continue reading to fix diagnosing your PC stuck issue on Windows 10.
How to Fix Stuck on Diagnosing your PC in Windows 10
We looked into this diagnosing your PC stuck issue by looking at multiple user reports and tried various repair strategies suggested by some impacted users. As it turns out, various conditions make your system trapped inside the diagnosing your PC screen. Here’s a list of circumstances that might lead to this issue on Windows 10.
- System File Corruption: Corrupted system files might also cause the System Diagnostic tool to appear at every system start-up. If this utility is also corrupted, it will be stuck in a loop.
- Inadequate System Space: As it turns out, this problem of this issue can also arise when the system lacks sufficient storage capacity to load all the programs and services required for the starting operation.
- Glitched Automated Repair Utility: This issue has been reported by multiple customers to be caused by mysterious system drive troubles. In this instance, the Automatic Repair program will try to open at every restart in an attempt to fix the problem, but it will be unable to locate the source of the problem.
- Faulty BCD Data: Corrupted booting data might also cause this issue in severe conditions, which prevents the starting process from finishing.
Some afflicted customers have attempted rebooting their computers to get rid of this problem but have claimed that their computers go into a dark screen, show the logo, and then return to the Diagnostic PC page. The operating system indicates that your device has been diagnosed, but there might be no progress made. You can follow the below methods to resolve the issue.
Method 1: Perform Hard Reboot
You can do a hard reboot if your Windows is unable to boot due to the Preparing Automatic Repair or Diagnosing your PC issue.
1. Cabut plag AC penyesuai dan keluarkan bateri dari peranti.
2. Check if it boots up normally by pressing and holding the butang kuasa Untuk 20 saat.
If this technique fails, try one of the following options.
Juga Baca: Bagaimana untuk membetulkan Ralat WDF_VIOLATION dalam Windows 10
Kaedah 2: But dalam Mod Selamat dan Kosongkan Ruang
As some users have discovered, this issue can also occur when the system does not have enough capacity to start. Several individuals in a similar position have overcome the problem by running their machines in Safe Mode and freeing up some space. Follow our guide on How to Boot to Safe Mode in Windows 10.
Then, perform Disk cleanup by following our guide to run Disk Cleanup.
If diagnosing your PC Windows 10 problem persists, follow the next procedure below.
Kaedah 3: Membaiki Fail Sistem
It’s also possible that this problem is caused by System File corruption. These corrupted files might prevent the booting procedure from finishing. You’ll have to run the scans before the Booting phase since you can’t go beyond the Diagnostics page. Read our guide on How to Repair System Files on Windows 10.
Juga Baca: Betulkan Komputer Tidak Disegerakkan Semula Kerana Tiada Data Masa Tersedia
Method 4: Run System Restore Utility
You may be dealing with a serious corruption problem that can’t be treated traditionally. When faced with a circumstance like this, the best action is to take a damage-control strategy. Most start-up troubles caused by system file corruption can be resolved by returning the machine to a healthy condition in which all components are working properly. Follow the below steps.
1. Masukkan cakera pemasangan and mulakan semula PC anda.
2. Press any utama to start up the installation media when you see the booting screen.
3. When Windows Setup has finished loading, click on Pembaikan komputer anda.
4. Akses ke Selesaikan masalah menu from the first repair menu.
5. Klik pada Pilihan Lanjutan from the Troubleshoot menu.
6. Kemudian klik pada Command Prompt from the list of available utilities.
7. Untuk membuka Pulihkan Sistem program, type the rstrui.exe perintah ke dalam Command Prompt tetingkap dan tekan butang Masukkan kunci.
8. Klik pada Seterusnya once you’ve reached the first screen.
9. Sekarang, semak the option labeled Tunjukkan lagi titik pemulihan.
10. Once you’ve done so, go through each restoration gambar and pick one taken before the Diagnostics problem.
11. To go on to the next option, choose the suitable foto dan klik pada Seterusnya.
12. Sekarang, klik pada Selesai.
Your system will restart automatically after restoring, and the old machine will be fixed at the next system starting.
Method 5: Rebuild BCD
In Windows 10, you’ll get the Preparing Automatic Repair error if the boot files are missing or damaged. As a result, some users will re-build the boot record using the procedures below.
1. Insert the Windows bootable installation CD into the PC displaying the error message Preparing Automatic Repair or Diagnosing your PC.
2. Start your computer by booting from the CD pemasangan.
3. To continue, choose your bahasa tetapan dan klik pada Seterusnya .
4. Pilih pembaikan komputer anda.
5. Pilih Selesaikan masalah.
6. Pilih Command Prompt.
7. Enter the instructions below into the prompt, and press the Masukkan kunci selepas setiap satu.
bootrec / fixmbr bootrec / fixboot bootrec / scanos bootrec / rebuildbcd
8. Then, type the command keluar dan tekan Masukkan kunci.
9. Akhirnya, but semula PC.
Juga Baca: Bagaimana untuk Membetulkan Ralat Kemas Kini Windows 80072ee2
Kaedah 6: Lumpuhkan Pembaikan Permulaan Automatik
If this happens, the Automatic Start-up Repair software will launch at every system start-up. However, if the utility is broken, you might not be able to go past the start-up screen. Therefore, disabling this software would prevent the Diagnosing your PC screen from appearing.
1. As soon as you see the introductory screen, press the F8 key repeatedly to get to the Pilihan Boot Lanjutan menu.
2. Pilih Safe Mode with Networking from the Advanced Boot Options menu by pressing the Kekunci F5 or using the arrow keys.
3. When the booting routine is complete, press Kekunci Windows + I untuk melancarkan Jalankan kotak dialog.
4. Taipkan cmd dan tekan Kekunci Ctrl + Shift + Enter to open an Promosi Perintah yang ditinggikan.
5. Klik pada Ya dalam gesaan.
6. Masukkan perkara berikut arahan dan tekan Masukkan kunci.
bcdedit /set recoveryenabled NO
7. Setelah proses selesai, restart peranti anda.
If diagnosing your PC Windows 10 problem persists or you don’t get a different error, continue the next procedure.
Method 7: Uninstall Updates
If the update fails to install properly on your device, you might face this issue. Follow the below steps to resolve the discussed issue.
1. Tekan Kunci Windows dan jenis Panel Kawalan, kemudian, klik pada Buka.
2. Sekarang, klik pada Nyahpasang program pilihan di bawah Program menu seperti yang digambarkan.
3. Sekarang, klik pada Lihat dipasang kemas kini dalam anak tetingkap kiri seperti yang ditunjukkan.
4. Sekarang, cari dan pilih kemas kini terbaharu dengan merujuk kepada Dipasang Pada tarikh dan klik pada Uninstall pilihan seperti yang ditunjukkan di bawah.
5. Finally, confirm any prompt and mulakan semula PC.
Check if diagnosing your PC stuck issue persists or not.
Juga Baca: 7 Cara untuk Membetulkan Ralat BSOD iaStorA.sys pada Windows 10
Method 8: Perform Repair Install
If none of the above-mentioned repair methods have worked, you’re probably dealing with a serious case of system corruption that can’t be fixed using normal methods. In this case, the only way to repair the problem is to reset every Windows component, including any booting-related tasks causing the Automatic Repair loop. You may always perform a clean installation but bear in mind that doing so will lose any saved data within your Windows system. If you choose a clean install, all your personal data, applications, games, documents, and other media will disappear. Read our guide on How to do a Clean Install of Windows 10 and implement the same.
Lawatan:
We hope you found this information useful and that you were able to resolve stuck on diagnosing your PC in Windows 10 problem. Please let us know which technique was the most beneficial for you. Please use the form below if you have any queries or comments. Also, let us know what you want to learn next.