Fix Windows Cannot Be Installed to Drive 0: If you are trying to install Windows 10 or Windows 8 on your PC chances are you may receive the error message “Windows cannot be installed to disk # partition #”. Also, if you continue further and click Next, you will again receive another error message “Windows was unable to install to the selected location” and the installation will exit. In short, you won’t be able to install Windows because of this error message.
Now the hard drive has two different partitioning system namely MBR (Master Boot Record) and GPT (GUID Partition Table ). In order to install your Windows on the hard disk, the correct partition system must be selected beforehand, for example, if your computer boots into Legacy BIOS then the MBR partition system should be used and if it boots into UEFI mode then the GPT partition system should be used. So without wasting any time let’s see how to actually Fix Windows Cannot Be Installed to Drive 0 error with help of below-listed troubleshooting guide.
SOLVED: Windows Cannot Be Installed to Drive 0
Method 1: Change the Boot option
1.Turn off your laptop, then turn it on and simultaneously tekan F2, DEL atau F12 (bergantung pada pengilang anda) untuk memasukinya Persediaan BIOS.
2.Under BIOS setup search for Boot options and then look for UEFI/BIOS Boot mode.
3.Now select either Legacy or UEFI depending on your hard drive. If you have a GPT partition pilih UEFI and if you have MBR partition pilih BIOS warisan.
4.Save changes and then exit BIOS.
Method 2: Convert GPT to MBR
Catatan: This will erase all the data on your hard drive, backup your data before continuing with this step.
1.Boot from installation media and then klik Pasang.
2.Now on the next screen press Shift + F10 untuk membuka Arahan prompt.
3.Taip arahan berikut ke dalam cmd dan tekan Enter selepas setiap satu:
diskpart list disk select disk 0 (Note: Change the number 0 according to the disk you want to convert) convert mbr exit
4.Now the disk will be converted to MBR partition and you can continue with the installation.
Method 3: Completely Easre the partition
Catatan: Make sure to backup all your data before continuing as this will completely erase all your data.
1.Boot from installation media and then click Pasang.
2.Now on the next screen press Shift + F10 to open Command Prompt.
3.Type the following command and hit Enter after each one:
diskpart list disk select disk 0 (Note: Change the number 0 according to the disk you want to convert) clean exit
4.This will erase all the data and then you can continue with the installation.
Disyorkan untuk anda:
Itu sahaja yang anda telah berjaya Fix Windows Cannot Be Installed to Drive 0 tetapi jika anda masih mempunyai sebarang soalan mengenai panduan ini, sila tanya mereka di bahagian komen.