When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistema Operattiva skaduta.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Mhux imqabbad, ikklikkja fuq il-buttuna Network globe icon, choose your Wi-Fi network and click on Għamel button. Make sure Modalità ta 'l-ajruplan is not turned on.
3. If you again face the same network connection error code, then click on the Skonnettja button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Ikklikkja bil-lemin fuq il- Ikona Wi-Fi u agħżel Open Network & Internet settings.
6. Ikklikkja fuq Wi-Fi.
7. Scroll down the right menu, click on Immaniġġja netwerks magħrufa.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Tinsa.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metodu 2: Ibda mill-ġdid Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nota: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Sib il-paġna Buttuna ta 'l-enerġija fuq wara tar-router tiegħek.
2. Agħfas il-buttuna darba biex itfiha.
3. Issa, skonnettja tiegħek Router power cable u stenna sakemm il-qawwa tkun kompletament imsaffija mill-capacitors.
4. Imbagħad, jerġgħu jingħaqdu l- kejbil l-enerġija u ixgħelha wara minuta.
5. Stenna sakemm il-konnessjoni tan-netwerk tiġi stabbilita mill-ġdid u ipprova erġa' idħol.
Ukoll Aqra: Fix Computers Not Showing Up on Network in Windows 10
Metodu 3: Ħaddem in-Netwerk Troubleshooter
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Agħfas il- Windows key u t-tip Issolvi l-issettjar tal-problemi fil-bar tat-tfittxija u Open.
2. Ikklikkja fuq Issolvi l-problemi addizzjonali.
3. Agħżel Adapter tan-Netwerk u kklikkja fuq Mexxi l-troubleshooter.
4. Select the network adapter to diagnose u kklikkja fuq Li jmiss.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, ikklikkja fuq Agħlaq is-soluzzjoni tal-problemi.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Ukoll Aqra: Waħħal Family Sharing YouTube TV Mhux Taħdim
Metodu 4: Tiswija Fajls tas-Sistema
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Kontrollur tal-fajl tas-sistema) /DISM (Deployment Image Servicing u l-Immaniġġjar) utilities on your Windows 10 PC.
1. Agħfas il- Windows key, it-tip Kmand Prompt u kklikkja fuq Mexxe bħala amministratur.
2. Ikklikkja fuq Iva ġol Utenti Kont Kontroll fil-pront.
3. Tip chkdsk C: / f / r / x kmand u hit Ikteb iċ-ċavetta.
4. Jekk tintalab b'messaġġ, Chkdsk ma jistax jaħdem... il-volum huwa... proċess ta' użu, imbagħad, ittajpja Y u laqat Ikteb iċ-ċavetta.
5. Għal darb'oħra, ittajpja l-kmand: sfc / scannow u l-istampa Ikteb iċ-ċavetta biex tmexxi Kontrollur tal-fajl tas-sistema skennja.
Nota: Se jinbeda skan tas-sistema u se jieħu ftit minuti biex jintemm. Sadanittant, tista 'tkompli twettaq attivitajiet oħra imma kun konxju li ma tagħlaqx aċċidentalment it-tieqa.
Wara li tlesti l-iskannjar, se turi wieħed minn dawn il-messaġġi:
- Il-Ħarsien tar-Riżorsi tal-Windows ma sab l-ebda ksur tal-integrità.
- Windows Resource Protection ma setgħetx twettaq l-operazzjoni mitluba.
- Windows Resource Protection sabet fajls korrotti u ssewwihom b'suċċess.
- Windows Resource Protection sabet fajls korrotti iżda ma setgħetx tirranġa xi wħud minnhom.
6. Ladarba l-iskan ikun lest, erġa ibda il-PC tiegħek.
7. Għal darb'oħra, tnedija Kmand Prompt bħala amministratur u tesegwixxi l-kmandi mogħtija waħda wara l-oħra:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Nota: Irid ikollok konnessjoni tal-internet li taħdem biex tesegwixxi l-kmandi DISM kif suppost.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Agħfas il- Windows key u t-tip Apparat Manager in the Windows search menu. Click on miftuħa.
2. Espandi l- Adapters tan-netwerk sezzjoni billi tikklikkja darbtejn fuqha.
3. Ikklikkja bil-lemin fuq tiegħek Sewwieq tan-netwerk (pereżempju, Intel (R) Dual Band Wireless-AC 3168) u agħżel il- Itfi l-apparat għażla.
4. Confirm the below prompt by clicking on Iva.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Jattiva l-apparat għażla.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Ukoll Aqra: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type CMD. Ikklikkja fuq Mexxe bħala amministratur.
2. Ittajpja dan li ġej jikkmanda u laqat Ikteb iċ-ċavetta.
netsh winsock reset netsh int ip reset ipconfig / rilaxx ipconfig / ġġedded
3. Stenna li l-kmandi jiġu esegwiti u erġa 'ibda l-PC tiegħek.
Metodu 7: Aħsel il-Cache tad-DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Tnedija Kmand Prompt by searching in the twieqi menu and click on Run as administrator.
2. Tip ipconfig / flushdns in the command window and hit Ikteb.
Ukoll Aqra: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Niedi l- Mexxi dialog box billi tagħfas Ċwievet Windows + R flimkien.
2. Tip ncpa.cpl u hit Ikteb iċ-ċavetta.
3. Right-click on your active adapter tan-netwerk u kklikkja fuq Properties.
4. Neħħi l-marka Protokoll tal-Internet Verżjoni 6 (TCP / IPv6) għażla.
5. Fl-aħħarnett, ikklikkja fuq OK to save the changes and check if the issue is resolved.
Nota: If you use multiple network connections, navigate to Ċentru għan-Netwerk u l-Qsim u, Ibdel l-adapter settings. Right-click on the adapter and select Itfi. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tip Apparat Manager in the Windows search menu and click miftuħa.
2. Ikklikkja darbtejn fuq il- Adapters tan-netwerk biex tespandiha.
3. Ikklikkja bil-lemin fuq tiegħek sewwieq (eż Intel (R) Dual Band Wireless-AC 3168) u kklikkja Aġġorna s-sewwieq.
4. Ikklikkja fuq Ibbrawżja l-kompjuter tiegħi għas-sewwieqa to locate and install a driver manually.
5. Ikklikkja fuq il - Browser button to choose any directory and click on Li jmiss.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, The best drivers for your device are already installed.
6. Ikklikkja fuq Agħlaq biex toħroġ mit-tieqa.
7. Erġa ibda the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Tnedija Apparat Manager from the Windows search menu.
2. Ikklikkja bil-lemin fuq il- sewwieq u agħżel Uninstall device.
3. A warning prompt will be displayed on the screen. Check the box “Ħassar is-software tas-sewwieq għal dan l-apparat” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Żur il- websajt tal-manifattur.
2. Sib u, download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the fajl imniżżel and follow the given instructions to install it.
Ukoll Aqra: How to set up a VPN on Windows 10
Metodu 10: Aġġorna l-Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Agħfas il-buttuna Windows+I ċwievet flimkien biex tiftaħ Settings Fuq il-kompjuter tiegħek.
2. Agħżel Aġġornament u Sigurtà.
3. Agħżel Iċċekkja għal Aġġornamenti.
4A. Click Installa issa to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Int aġġornat messaġġ.
Metodu 11: Iddiżinstalla Aġġornamenti Riċenti
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Agħfas u żomm Ċwievet Windows + R flimkien biex tiftaħ il- Mexxi kaxxa ta 'dialog.
2. Tip appwiz.cpl u hit Ikteb.
3. Ikklikkja fuq Ara l-aġġornamenti installati.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and reboot il-PC.
Ukoll Aqra: Kif Waħħal Firefox Mhux Tagħbija Paġni
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the adapters tan-netwerk installed in your PC along with their settings. All the stored settings are stored to default settings.
Nota: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Settings allura sistema u, dwar. Once you have reset your network, you have to reinstall all networking software bħal Klijenti VPN or Swiċċijiet virtwali.
1. Agħfas u żomm Ċwievet Windows + I flimkien biex tiftaħ Settings tal-Windows.
2. Ikklikkja fuq Netwerk u Internet.
3. Ikklikkja fuq Irrisettja n-Netwerk taħt Status.
4. Ikkonferma l-pront billi tikklikkja fuq Irrisettja issa.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Rakkomandata:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.