Most of the time, you will experience a kernel security check failure error after you have installed new software or hardware. Well, you will get this error when you will upgrade your windows because the drivers of previous versions of Windows will not be compatible with the new one. Hence, leaving with you the Kernel Security Check failure BSOD error.
Causes of kernel security check failure errors:
- Virus or malware infection that has corrupted Windows OS files.
- Device drivers are outdated or not properly configured.
- Corrupted or bad memory.
- Conflicting hardware or software.
- Damaged or corrupted Hard Disk.
First, your need to enable legacy boot, and if you don’t know how to do that, just follow this post to enable your advanced legacy boot option.
Before trying the below technical methods it’s advised that you do the following in order to fix kernel security check failure (KERNEL_SECURITY_CHECK_FAILURE) error:
- Make sure only one antivirus is running if you have purchased another make sure to turn off Windows Defender.
- Run Automatic Repair or use System Restore to try to fix the issue.
- Run a full system virus and malware scan with your antivirus.
- Install any pending updates through Windows update.
- Reinstall drivers from the manufacturer’s website.
- Run malware bytes.
kernel လုံခြုံရေးစစ်ဆေးမှု ပျက်ကွက်မှုကို ပြင်ဆင်ပါ (KERNEL_SECURITY_CHECK_FAILURE)
Method 1: Uninstall Graphic Card Driver
1. Boot your PC into Safe mode from the advanced boot menu.
2. Windows Key + R ကို နှိပ်ပြီး “ရိုက်ထည့်ပါ။devmgmt.msc” and hit Enter to Device Manager.
3. In Device Manager, expand the Display adapter.
4. Next, select your Nvidia ကဒ် and then right click then select Properties ကို။
5. ယခု ရွေးချယ်ပါ။ Drivers tab နှင့်အပေါ်ကိုကလစ်နှိပ်ပါ ယာဉ်မောင်းသို့ပြန်သွားရန်လှိမ့်ပုံ (If asked for confirmation click Yes to confirm).
6. If the Roll Back option is grayed out then click “Uninstall ကို"ဤ driver ကို uninstall လုပ်ရန်။
7. Restart your PC and on the advanced boot, select “Start your PC normally.”
နည်းလမ်း 2- Driver Verifier ကိုဖွင့်ပါ။
Safe Mode တွင်မဟုတ်ဘဲ ပုံမှန်အားဖြင့် သင့် Windows သို့ ဝင်ရောက်နိုင်မှသာ ဤနည်းလမ်းသည် အသုံးဝင်ပါသည်။ ထို့နောက် System Restore point ကိုဖန်တီးရန်သေချာပါစေ။
To run Driver Verifier to fix kernel security check failure, go here.
နည်းလမ်း 3- System File Checker ကိုဖွင့်ပြီး Disk ကိုစစ်ဆေးပါ။
1. Again, Boot your PC into safe mode from the above-advanced boot menu.
2. Once you login into safe mode, press Windows key + X and click on Command Prompt(Admin)။
3. In the command prompt, type the following command and hit enter after each one:
sfc /scannow chkdsk /f C:
4. Once the process is finished, exit the cmd.
5. Now type memory in the Windows search bar and select “Windows Memory Diagnostic ။"
6. ပြသထားသော ရွေးချယ်စရာအစုံတွင် “ကိုရွေးချယ်ပါယခုပြန်လည်စတင်ပြီးပြforနာများကိုစစ်ဆေးပါ။ "
7. After which Windows will restart to check for possible RAM errors and will hopefully display the possible reasons as for why you get the မရဏ၏အပြာရောင်ဖန်သားပြင် (BSOD) အမှားပြစာ။
8. Reboot your PC and check if the problem is resolved or not.
နည်းလမ်း 4: Memtest86 ကို run
To be sure, again run the memory test, but this time using Memtest as it eliminates all the possible exceptions, and it’s better than the built-in memory test as it runs outside the Windows environment.
Note: Before starting, make sure you have access to another computer as you will need to download and burn the software to the disc or USB flash drive. It’s best to leave the computer overnight when running Memtest as it sure likely to takes some time.
1. Connect a USB flash drive ကို to your working PC.
2 ။ Download လုပ်ပြီးအင်စတောလုပ်ပါ Windows Memtest86 Auto-installer for USB Key.
၄ downloaded image file နှင့်ကိုရွေးပါဒီမှာထုတ်ယူပါ"option ကို။
4. Once extracted, open the ဖိုငျတှဲ နှင့်ပြေး Memtest86+ USB တပ်ဆင်မှု.
5. သင်၏ရွေးချယ်ပါ။ plugged USB drive to burn the MemTest86 software (This will erase all the content from your USB).
6. Once the above process is finished, insert the USB to the PC, giving the KERNEL_SECURITY_CHECK_FAILURE error.
7. Restart your PC and make sure boot from USB flash drive is selected.
8. Memtest86 will begin testing for memory corruption in your system.
9. If you have passed all 8 phases of the test, you can be sure that your memory is working correctly.
10. If some of the steps were unsuccessful, then Memtest86 will find memory corruption which means that your kernel security check failure (KERNEL_SECURITY_CHECK_FAILURE) blue screen of death error is because of bad/corrupt memory.
၁၁။အလို့ငှာ fix kernel security check failure errorမမ်မိုရီကဏ္ဍများ မကောင်းပါက သင်၏ RAM ကို အစားထိုးရန် လိုအပ်မည်ဖြစ်သည်။
Method 5: Run Disk Cleanup and Error Checking
1. Again, boot your windows into safe mode and follow the below steps for each hard disk partition you have(example Drive C: or E:).
2. Go to This PC or My PC နှင့်အပေါ် right-click လုပ်ပါ မောင်း ရွေးချယ်ရန် Properties ကို။
3. အခု အနေနဲ My Properties ဝင်းဒိုးကို, ကို select disk Cleanup and click clean up စနစ်ဖိုင်များ။
4. Again, go to the properties windows နှင့်ကို select ကိရိယာများ တက်ဘ်.
၂၊ နောက်ကိုနှိပ်ပါ စစ်ဆေးခြင်း အောက် Error-checking.
6. Follow the on-screen instruction to finish error checking.
7. Restart your PC and boot to windows normally.
ဒါပဲ၊ မင်းအောင်မြင်ပြီ။ Fix kernel security check failure (KERNEL_SECURITY_CHECK_FAILURE), but if you still have any queries regarding this guide, then feel free to ask them in the comments section.