When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
Zorg ervoor dat u een herstelpunt maakt voor het geval er iets misgaat.
Method 1: Uninstall Graphic Card Driver
1. Klik met de rechtermuisknop op uw NVIDIA grafische kaart onder apparaatbeheer en selecteer Verwijderen.
2. Als u om bevestiging wordt gevraagd, selecteert u Ja.
3. Druk op Windows-toets + X en selecteer vervolgens Control Panel.
4. Klik in het Configuratiescherm op Een programma verwijderen.
5. next, verwijder alles wat met Nvidia te maken heeft.
6. Start uw systeem opnieuw op om wijzigingen op te slaan en download opnieuw de installatie van de website van de fabrikant.
5. Als je zeker weet dat je alles hebt verwijderd, probeer de stuurprogramma's opnieuw te installeren. De setup zou zonder problemen moeten werken.
Methode 2: stuurprogramma's voor grafische kaarten bijwerken
1. Druk op Windows-toets + R en typ vervolgens devmgmt.msc en druk op Enter om Apparaatbeheer te openen.
2. Vouw vervolgens uit Beeldschermadapters and right-click on your Nvidia Graphic Card and select Inschakelen.
3. Once, you have done this again, right-click on your graphic card and select “Update de stuurprogrammasoftware."
4. Selecteer "Zoek automatisch naar bijgewerkte stuurprogramma's” and let it finish the process.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Driver Update Software” but this time on the next screen select “Blader op mijn computer naar stuurprogramma's."
7. Now. select "Laat me kiezen uit een lijst met apparaatstuurprogramma's op mijn computer. '
8. Finally, select the compatible driver from your Nvidia grafische kaart list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Eigenschappen.
2. Dan klikken Geavanceerde systeeminstellingen uit het linkermenu.
Opmerking: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl en druk op Enter.
3. Schakel over naar Tabblad Geavanceerd if not already there and click Settings under Prestatie.
4. Now select the checkbox which says “Pas aan voor de beste prestaties."
5. Klik op Toepassen, gevolgd door OK.
6. Start uw pc opnieuw op om wijzigingen op te slaan.
Method 4: Increase GPU processing time (Registry Fix)
1. Druk op Windows-toets + R en typ vervolgens regedit en druk op Enter om de Register-editor te openen.
2. Navigeer naar de volgende registersleutel:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click New and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
Voor 32-bits Windows:
een. Selecteer DWORD (32-bits)-waarde en het type TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
Voor 64-bits Windows:
een. Selecteer QWORD (64-bit) Value en het type TdrDelay as the Name.
b. Double click on TdrDelay and voer 8 in in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
Aanbevolen:
Dat heb je met succes Fix Display driver stopped responding and has recovered error [SOLVED] maar als je nog vragen hebt over dit bericht, stel ze dan gerust in het commentaargedeelte.