When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus- of malware-aanval.
- Verouderd besturingssysteem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icoon.
2. If the status is set to Niet verbonden, Klik op de Network globe icon, choose your Wi-Fi network and click on Verbinden button. Make sure Vliegtuigmodus is niet ingeschakeld.
3. If you again face the same network connection error code, then click on the Koppel button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Klik met de rechtermuisknop op de Wi-Fi-pictogram en selecteer Open Netwerk- en internetinstellingen.
6. Klik op Wi-Fi.
7. Scroll down the right menu, click on Beheer bekende netwerken.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Vergeten.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Methode 2: herstart de router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Opmerking: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Vind de uitknop aan de achterkant van uw router.
2. Druk één keer op de knop zet het uit.
3. Nu, loskoppelen jouw Voedingskabel van de router en wacht totdat de stroom volledig uit de condensatoren is verdwenen.
4. Dan, Reconnect de Stroomkabel en zet hem na een minuut aan.
5. Wacht tot de netwerkverbinding opnieuw tot stand is gebracht en Probeer opnieuw in te loggen.
Lees ook: Computers repareren die niet verschijnen op het netwerk in Windows 10
Methode 3: Voer de netwerkprobleemoplosser uit
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Druk op de Windows-toets en het type Problemen met instellingen oplossen in de zoekbalk en Open.
2. Klik op Extra probleemoplossers.
3. kiezen Network Adapter en klik op Voer de probleemoplosser uit.
4. Select the network adapter to diagnose en klik op Volgende.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Klik op Sluit de probleemoplosser.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Lees ook: Fix Familie delen YouTube TV werkt niet
Methode 4: Systeembestanden repareren
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Implementatiebeeldservice en -beheer) utilities on your Windows 10 PC.
1. Druk op de Windows-toetstype Command Prompt en klik op Als administrator uitvoeren.
2. Klik op Ja in de User Account Control prompt.
3. Type chkdsk C: / f / r / x commando en hit Enter toets.
4. Als u een bericht krijgt, Chkdsk kan niet worden uitgevoerd... het volume is... in gebruik procesen typ vervolgens Y en druk op de Enter toets.
5. Typ nogmaals de opdracht: sfc / scannow en druk op Enter toets om de System File Checker scannen.
Opmerking: Er wordt een systeemscan gestart, die enkele minuten duurt. Ondertussen kunt u doorgaan met het uitvoeren van andere activiteiten, maar let erop dat u het raam niet per ongeluk sluit.
Nadat de scan is voltooid, wordt een van deze berichten weergegeven:
- Windows Resource Protection heeft geen integriteitsschendingen geconstateerd.
- Windows Resource Protection kan de gevraagde bewerking niet uitvoeren.
- Windows Resource Protection heeft corrupte bestanden gevonden en deze met succes gerepareerd.
- Windows Resource Protection vond corrupte bestanden, maar kon sommige ervan niet repareren.
6. Zodra de scan is voltooid, restart uw pc.
7. Nogmaals, start Opdrachtprompt als beheerder en voer de gegeven commando's één voor één uit:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Opmerking: U moet een werkende internetverbinding hebben om DISM-opdrachten correct uit te voeren.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Druk op de Windows-toets en het type Device Manager in the Windows search menu. Click on Openen.
2. Vouw het netwerkadapters sectie door erop te dubbelklikken.
3. Klik met de rechtermuisknop op uw Netwerkstuurprogramma (bijvoorbeeld, Intel (R) Dual Band Wireless-AC 3168) in en selecteer het Schakel het apparaat uit optie.
4. Confirm the below prompt by clicking on Ja.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Schakel apparaat in optie.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Lees ook: Fix Windows could not automatically detect this Network’s Proxy settings
Methode 6: IPconfig opnieuw instellen
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Ga naar het zoekmenu en typ cmd. Klik op Als administrator uitvoeren.
2. Typ het volgende: commando's en druk op de Enter toets.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Wacht tot de opdrachten zijn uitgevoerd en herstart je pc.
Methode 7: DNS-cache leegmaken
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lancering Command Prompt by searching in the Dakramen en raamkozijnen MENU and click on Run as administrator.
2. Type ipconfig / flushdns in het opdrachtvenster en druk op Enter.
Lees ook: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lanceer de lopen dialoogvenster door op te drukken Windows + R-toetsen samen.
2. Type ncpa.cpl en druk op Enter toets.
3. Right-click on your active netwerkadapter en klik op Properties.
4. Schakel het Internet Protocol versie 6 (TCP / IPv6) optie.
5. Klik ten slotte op OK om de wijzigingen op te slaan en te controleren of het probleem is opgelost.
Opmerking: If you use multiple network connections, navigate to Netwerkcentrum en Adapter wijzigen settings. Right-click on the adapter and select onbruikbaar maken. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Type Device Manager in the Windows search menu and click Openen.
2. Dubbelklik op de netwerkadapters om het uit te breiden.
3. Klik met de rechtermuisknop op uw bestuurder (bv Intel (R) Dual Band Wireless-AC 3168) en klik op Stuurprogramma bijwerken.
4. Klik op Zoek op mijn computer naar stuurprogramma's handmatig een stuurprogramma zoeken en installeren.
5. Klik op het browser button to choose any directory and click on Volgende.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Als ze zich al in een bijgewerkte fase bevinden, wordt op het scherm het volgende bericht weergegeven: De beste stuurprogramma's voor uw apparaat zijn al geïnstalleerd.
6. Klik op Sluiten om het venster te verlaten.
7. Herstart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lancering Device Manager from the Windows search menu.
2. Klik met de rechtermuisknop op de bestuurder en selecteer Apparaat verwijderen.
3. A warning prompt will be displayed on the screen. Check the box “Verwijder de stuurprogramma's voor dit apparaat' en bevestig de vraag door op te klikken Installatie ongedaan maken.
4. Download en installeer de stuurprogramma's op uw apparaat via een handmatige update of automatische update.
5. Bezoek de fabrikant's website.
2. VIND DE PLEK DIE PERFECT VOOR JOU IS en Downloaden de stuurprogramma's die overeenkomen met de Windows-versie op uw pc.
3. Dubbelklik na het downloaden op het gedownload bestand en volg de gegeven instructies om het te installeren.
Lees ook: Hoe u een VPN instelt op Windows 10
Methode 10: Windows bijwerken
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. druk de Windows + I toetsen samen te openen Instellingen op jouw computer.
2. kiezen Update en beveiliging.
3. kiezen Controleren op updates.
4A. Click Nu installeren om de nieuwste beschikbare update te downloaden en te installeren.
4B. Als uw systeem al up-to-date is, wordt dit weergegeven Je bent op de hoogte bericht.
Methode 11: Recente updates verwijderen
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Houd ingedrukt Windows + R-toetsen samen om de lopen dialoog venster.
2. Type appwiz.cpl en druk op Enter.
3. Klik op Geïnstalleerde updates.
4. Select the most recent update and click on Installatie ongedaan maken.
5. Confirm the prompt, if any, and start de pc opnieuw op.
Lees ook: Hoe u kunt oplossen dat Firefox pagina's niet laadt
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the Netwerkadapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Opmerking: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Instellingen harte Systeem en Over. Once you have reset your network, you have to reinstall all netwerksoftware als VPN-clients or Virtuele schakelaars.
1. Houd ingedrukt Windows + I-toetsen samen te openen Windows-instellingen.
2. Klik op Netwerk en internet.
3. Klik op Netwerk reset voor Status.
4. Bevestig de vraag door op te klikken Reset nu.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Aanbevolen:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.