Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Start opnieuw op en selecteer het juiste opstartapparaat
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Start opnieuw op en selecteer het juiste opstartapparaatprobleem [OPGELOST]
Method 1: Set Correct Boot Order
Mogelijk ziet u de fout "Start opnieuw op en selecteer het juiste opstartapparaat” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Wanneer uw computer opstart (vóór het opstartscherm of het foutscherm), drukt u herhaaldelijk op de Delete- of F1- of F2-toets (afhankelijk van de fabrikant van uw computer) om enter BIOS setup.
2.Zodra u zich in de BIOS-setup bevindt, selecteert u het tabblad Opstarten in de lijst met opties.
3. Zorg er nu voor dat de computer Harde schijf of SSD is ingesteld als een topprioriteit in de opstartvolgorde. Als dat niet het geval is, gebruik dan de pijltoetsen omhoog of omlaag om de harde schijf bovenaan in te stellen, wat betekent dat de computer er eerst vanaf zal opstarten in plaats van een andere bron.
4. Druk ten slotte op F10 om deze wijziging op te slaan en af te sluiten. Dit moet hebben Fix Reboot and Select Proper Boot Device Issue, zo niet, ga dan verder.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Om Diagnostics uit te voeren, start u uw pc opnieuw op en terwijl de computer start (vóór het opstartscherm), drukt u op de F12-toets en wanneer het opstartmenu verschijnt, markeert u de optie Boot to Utility Partition of de Diagnostics-optie en drukt u op enter om de Diagnostics te starten. Hiermee wordt automatisch alle hardware van uw systeem gecontroleerd en wordt er gerapporteerd als er een probleem wordt gevonden.
Aanbevolen: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Belangrijk: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Plaats de opstartbare installatie-dvd van Windows 10 en start uw pc opnieuw op.
2.Wanneer u wordt gevraagd om op een willekeurige toets te drukken om op te starten vanaf cd of dvd, drukt u op een willekeurige toets om door te gaan.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Herstart en je hebt met succes Fix Reboot and Select Proper Boot Device issue, if not, continue.
Lees ook Hoe u kunt verhelpen dat Automatische reparatie uw pc niet kan repareren.
Method 5: Enable UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Opmerking: Markeer altijd de door het systeem gereserveerde partitie (meestal 100 MB) als actief en als u geen door het systeem gereserveerde partitie hebt, markeer dan C: Drive als de actieve partitie.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Methode 7: Repareren Installeer Windows 10
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Dat heb je met succes Bepalen Reboot and Select proper Boot device issue maar als je nog vragen hebt over dit bericht, stel ze dan gerust in het commentaargedeelte.