Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix feilkode 0x80070035 Nettverksbanen ble ikke funnet
Sørg for å opprette et gjenopprettingspunkt i tilfelle noe går galt.
Metode 1: Deaktiver antivirus og brannmur midlertidig
1. Høyreklikk på Antivirusprogramikon fra systemstatusfeltet og velg Deaktiver.
2. Deretter velger du tidsrammen som Antivirus forblir deaktivert.
Merk: Velg minst mulig tid, for eksempel 15 minutter eller 30 minutter.
3.Once done, again check if the error resolves or not.
4. Trykk på Windows-tasten + I og velg deretter Kontrollpanel.
5. Deretter klikker du på System og sikkerhet.
6. Klikk deretter på Windows brannmur.
7. Fra venstre vindusrute klikker du på Slå Windows-brannmur på eller av.
8.Velg Slå av Windows-brannmuren og start PC-en på nytt. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Hvis metoden ovenfor ikke fungerer, må du følge nøyaktig samme trinn for å slå på brannmuren igjen.
Method 2: Delete Hidden Network Adapters
1. Trykk på Windows-tasten + R og skriv deretter devmgmt.msc og trykk Enter for å åpne Enhetsbehandling.
2. Velg nå Nettverksadaptere og klikk deretter Vis> Vis skjulte enheter.
3.Right-click on each of the hidden devices and select Avinstaller enheten.
4.Do this for all the hidden devices listed under Network Adapters.
5. Start PC-en på nytt for å lagre endringene.
Method 3: Turn ON Network Discovery
1. Trykk på Windows-tasten + X og velg deretter Kontrollpanel.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings fra menyen til venstre.
4.Check mark Slå på nettverksfunn and click Save changes.
5. Start PC-en på nytt for å lagre endringer og se om du er i stand til det Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. Trykk på Windows-tasten + R og skriv deretter ncpa.cpl og trykk Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select Egenskaper.
3.Velg 4 Internet Protocol versjon (TCP / IPv4) og klikk Egenskaper.
4. Klikk nå Avansert in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Aktiver NetBIOS over TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. Trykk på Windows-tasten + X og velg deretter Kontrollpanel.
2.Type legitimasjons~~POS=TRUNC in the control panel search and click on Legitimasjonsansvarlig.
3.Velg Windows-legitimasjon og klikk deretter på Add a Windows credential.
4.One by one type the brukernavn og passord of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Egenskaper.
2.Bytt til Delingsfanen and if under Network Path it says Not Shared then click on Advanced Sharing button.
3. Hake "Del denne mappen” and make sure the Share name is correct.
4. Klikk på Bruk etterfulgt av OK.
Method 7: Change Network Security settings
1. Trykk på Windows-tasten + R og skriv deretter secpol.msc og trykk Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3.Dobbeltklikk på Nettverkssikkerhet: LAN Manager autentiseringsnivå in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. Klikk på Bruk etterfulgt av OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Metode 8: Tilbakestill TCP / IP
1. Høyreklikk på Windows-knappen og velg "Ledetekst (Admin)."
2. Skriv inn følgende kommando og trykk enter etter hver kommando:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3. Åpne Admin Ledetekst igjen og skriv inn følgende og trykk enter etter hver av dem:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip reset
- netsh winsock reset
4. Start på nytt for å bruke endringer.
Anbefalt for deg:
Det er det du har lykkes med Fix feilkode 0x80070035 Nettverksbanen ble ikke funnet men hvis du fortsatt har spørsmål angående dette innlegget, kan du gjerne stille dem i kommentarfeltet.