When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus eller malware-angrep.
- Utdatert operativsystem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikonet.
2. If the status is set to Ikke tilkoblet, Klikk på Network globe icon, choose your Wi-Fi network and click on Koble button. Make sure Flymodus er ikke slått på.
3. If you again face the same network connection error code, then click on the Koble button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Høyreklikk på Wi-Fi-ikon og velg Open Network & Internet settings.
6. Klikk på Wi-Fi.
7. Scroll down the right menu, click on Administrer kjente nettverk.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Glemme.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metode 2: Start ruteren på nytt
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
OBS: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Finn Power-knappen på baksiden av ruteren.
2. Trykk én gang på knappen for å skru det av.
3. Nå, koble din Ruter strømkabel og vent til strømmen er helt tappet fra kondensatorene.
4. Deretter, koble de strømkabel og slå den på etter et minutt.
5. Vent til nettverkstilkoblingen er gjenopprettet og prøv å logge på igjen.
Les også: Reparer datamaskiner som ikke vises på nettverket i Windows 10
Metode 3: Kjør feilsøkingsverktøy for nettverk
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Trykk på Windows-tasten og type Feilsøk innstillinger i søkefeltet og Åpne.
2. Klikk på Flere feilsøkere.
3. velg Network Adapter og klikk på Kjør feilsøkingsprogrammet.
4. Select the network adapter to diagnose og klikk på neste.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, klikk på Lukk feilsøkeren.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Les også: Rett opp familiedeling YouTube TV fungerer ikke
Metode 4: Reparer systemfiler
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Deployment Image Servicing og Management) utilities on your Windows 10 PC.
1. Trykk på Windows-tasten, Type Ledetekst og klikk på Kjør som administrator.
2. Klikk på Ja i Brukerkontokontroll teksten.
3. Type chkdsk C: / f / r / x kommando og treff Skriv inn tasten.
4. Hvis du blir bedt om en melding, Chkdsk kan ikke kjøre ... volumet er ... i bruk, så skriv Y og traff Skriv inn tasten.
5. Skriv inn kommandoen igjen: sfc / scannow og trykk Skriv inn tasten å kjøre System File Checker skanne.
OBS: En systemskanning vil bli initiert og det vil ta et par minutter å fullføre. I mellomtiden kan du fortsette å utføre andre aktiviteter, men vær oppmerksom på ikke å lukke vinduet ved et uhell.
Etter å ha fullført skanningen, vil den vise en av disse meldingene:
- Windows Resource Protection fant ingen brudd på integriteten.
- Windows Resource Protection kunne ikke utføre den forespurte operasjonen.
- Windows Resource Protection fant korrupte filer og reparerte dem.
- Windows Resource Protection fant korrupte filer, men klarte ikke å fikse noen av dem.
6. Når skanningen er fullført, restart din PC.
7. Igjen, start Kommandoprompt som administrator og utfør de gitte kommandoene etter hverandre:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
OBS: Du må ha en fungerende internettforbindelse for å utføre DISM-kommandoer riktig.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Trykk på Windows-tasten og type Enhetsbehandling in the Windows search menu. Click on Åpen.
2. Utvid nettverkskort section by double-clicking on it.
3. Høyreklikk på din Nettverksdriver (for eksempel, Intel (R) Dual Band Wireless-AC 3168) og velg Deaktiver enheten alternativet.
4. Confirm the below prompt by clicking on Ja.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Aktiver enheten alternativet.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Les også: Fix Windows kunne ikke automatisk oppdage dette nettverkets proxy-innstillinger
Metode 6: Tilbakestill ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Klikk på Kjør som administrator.
2. Skriv inn følgende kommandoer og traff Skriv inn tasten.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Wait for the commands to be executed and start datamaskinen på nytt.
Metode 7: Tøm DNS-bufferen
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Launch Ledetekst by searching in the Windows meny and click on Run as administrator.
2. Type ipconfig / flushdns in the command window and hit Enter.
Les også: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Start Kjør dialogboksen ved å trykke Windows + R-taster sammen.
2. Type ncpa.cpl og treffer Skriv inn tasten.
3. Right-click on your active nettverksadapter og klikk på Eiendommer.
4. Fjern merket for Internettprotokoll versjon 6 (TCP / IPv6) alternativet.
5. Klikk til slutt på OK for å lagre endringene og sjekke om problemet er løst.
OBS: If you use multiple network connections, navigate to Nettverks- og delingssenter og Bytt adapter settings. Right-click on the adapter and select Deaktiver. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Type Enhetsbehandling in the Windows search menu and click Åpen.
2. Dobbeltklikk på nettverkskort for å utvide den.
3. Høyreklikk på din sjåfør (f.eks Intel (R) Dual Band Wireless-AC 3168) og klikk Oppdater driveren.
4. Klikk på Bla gjennom datamaskinen min for drivere to locate and install a driver manually.
5. Klikk på nett~~POS=TRUNC leseren~~POS=HEADCOMP button to choose any directory and click on neste.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, De beste driverne for enheten din er allerede installert.
6. Klikk på Lukke å gå ut av vinduet.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Launch Enhetsbehandling from the Windows search menu.
2. Høyreklikk på sjåfør og velg Avinstaller enheten.
3. A warning prompt will be displayed on the screen. Check the box “Slett driverprogramvaren for denne enheten" og bekreft forespørselen ved å klikke Avinstaller.
4. Last ned og installer driverne på enheten din enten ved manuell oppdatering eller automatisk oppdatering.
5. Besøk produsentens nettsted.
2. Finn og Last ned the drivers corresponding to the Windows version on your PC.
3. Når du har lastet ned, dobbeltklikker du på nedlastet fil and follow the given instructions to install it.
Les også: How to set up a VPN on Windows 10
Metode 10: Oppdater Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. trykk Windows + I nøkler sammen for å åpne innstillinger På datamaskinen din.
2. velg Oppdatering og sikkerhet.
3. velg Se etter oppdateringer.
4A. Click Installer nå for å laste ned og installere den siste tilgjengelige oppdateringen.
4B. Hvis systemet ditt allerede er oppdatert, vises det Du er oppdatert budskap.
Metode 11: Avinstaller nylige oppdateringer
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. trykk og hold Windows + R-taster sammen for å åpne Kjør dialogboks.
2. Type appwiz.cpl og treffer Enter.
3. Klikk på Vis installerte oppdateringer.
4. Select the most recent update and click on Avinstaller.
5. Confirm the prompt, if any, and start PC-en på nytt.
Les også: Hvordan fikse Firefox som ikke laster sider
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the nettverksadaptere installed in your PC along with their settings. All the stored settings are stored to default settings.
OBS: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to innstillinger deretter System og Om oss. Once you have reset your network, you have to reinstall all networking software i likhet med VPN -klienter or Virtuelle brytere.
1. trykk og hold Windows + I-nøkler sammen for å åpne Windows-innstillinger.
2. Klikk på Nettverk og Internett.
3. Klikk på Nettverks tilbakestilling etter status.
4. Bekreft forespørselen ved å klikke på Tilbakestill nå.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Anbefalt:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Fortell oss hvilken metode som fungerte best for deg. Også, hvis du har spørsmål/forslag angående denne artikkelen, kan du gjerne slippe dem i kommentarfeltet.