Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on Windows 10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Outdated network drivers.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
OBS: Sørg alltid for at du oppretter et systemgjenopprettingspunkt for å gjenopprette PC-en hvis noe går galt.
Grunnleggende feilsøkingsmetoder
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. Start PCen på nytt
1. trykk Alt + F4-tastene sammen for å åpne Slå av Windows vinduet.
2. Velg Restart og trykk på Skriv inn tasten.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. Flytt ruteren to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. Avoid too many devices koblet til samme nettverk.
4. Unngå trådløs forstyrrelse from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3. Start ruteren på nytt
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
Les også: Fiks Ingen WiFi-nettverk funnet i Windows 10
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. Koble nettverkstilkoblingen din, vent en stund og koble den til igjen.
2. Dersom Ethernet-kabel er koblet til, fjern den fra PC-en. Koble den deretter til igjen eller koble den til et Wi-Fi-nettverk. Dette vil sikre at det ikke er flimring mellom kablede og trådløse tilkoblinger.
5. Deaktiver flymodus
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
1. trykk og hold Windows + A-taster sammen for å åpne Action Center. Sjekk om Flymodus er slått på.
2A. If Flymodus is turned on, click on the setting to turn it off.
2B. If the Flymodus is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
1. Naviger til Kjør dialogboksen ved å trykke Windows + R-taster sammen.
2. Type ncpa.cpl og treffer Skriv inn tasten.
3. Now, right-click on your active nettverksadapter and check whether it is enabled or disabled.
3A. Klikk på aktiver if the status is disabled.
3B. If the status is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
Les også: How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1. Trykk på Ctrl + Shift + Esc-tastene sammen for å åpne Task manager.
2. I prosesser kategorien, klikk på Windows Explorer og velg Restart knapp.
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
Metode 2: Kjør feilsøkingsverktøy for nettverk
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
Les også: Slik tilbakestiller du nettverksinnstillinger på Windows 10
Metode 3: Avslutt alle bakgrunnsprosesser
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
Metode 4: Reparer systemfiler
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Les også: Reparer Windows 10 Netwtw04.sys Blue Screen Error
Metode 5: Kjør Malware Scan
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
Hvis du vil fjerne skadelig programvare på datamaskinen din, kan du også sjekke guiden vår Slik fjerner du skadelig programvare fra PC-en din i Windows 10.
Metode 6: Oppdater Windows
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
Etter å ha oppdatert Windows-operativsystemet, sjekk om du kan koble til nettverket.
Les også: Reparer datamaskiner som ikke vises på nettverket i Windows 10
Metode 7: Deaktiver VPN og proxy-server
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a mobil hotspot.
Method 8: Reset TCP or IP Protocol
TCP (Transmission Control Protocol) er en viktig nettverkstilkoblingsprotokoll som tildeler og identifiserer regler og Standard prosedyrer over internett. TCP/IP-protokoller er ansvarlige for overføring av datapakker fra avsender og mottaker. Hvis det er en konflikt i prosessen, vil tilbakestilling av protokollen sammen med IP-adressen hjelpe deg med å løse det diskuterte problemet. Følg guiden vår om hvordan du feilsøker nettverkstilkoblingsproblemer på Windows 10 for å tilbakestille TCP/IP.
After implementing the steps, check if you can fix network keeps dropping or not.
Metode 9: Bruk Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
Les også: Slik endrer du DNS-serverinnstillinger på Windows 11
Metode 10: Deaktiver strømsparingsmodus
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. Trykk på Windows-tasten, Type Enhetsbehandling og klikk på Åpen.
2. Dobbeltklikk nå på nettverkskort seksjon.
3. Høyreklikk deretter på din Nettverksadapter og velg Eiendommer alternativ som vist.
4. Bytt deretter til Power Management vindu i Egenskaper for nettverkskort window and uncheck the box next to Tillat at datamaskinen slår av denne enheten for å spare strøm.
5. Klikk til slutt på OK for å lagre endringene.
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1. Type Tjenester i søkefeltet og klikk på Åpen.
2. Now, scroll down and search for the Windows EventLog service.
3. Undersøk status av tjenesten.
3A. If the status er satt til kjører, right-click on the service and select the Stopp option. Wait for a while and then click on Start en gang til.
3B. If the status is ikke satt til kjører, right-click on the service and select the Start alternativet.
4. Repeat the above steps for the below tjenester også.
- Remote Procedure Call (RPC)
- Windows Update
- DHCP Client
- Automatisk oppsett av nettverkstilkoblede enheter
- Nettverkstilkoblingsmegler
- Nettverkstilkoblinger
- Nettverkstilkoblingsassistent
- Nettverkslistetjeneste
- Network Location Awareness
- Nettverksoppsetttjeneste
- Network Store Interface Service
Finally, check if you have fixed the discussed issue.
Les også: Fix Windows kunne ikke automatisk oppdage dette nettverkets proxy-innstillinger
Metode 12: Deaktiver antivirus midlertidig (hvis aktuelt)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
Metode 13: Deaktiver Windows Defender-brannmur (anbefales ikke)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
Metode 14: Oppdater nettverksdriveren
Sørg alltid for at hvis du bruker oppdaterte nettverksdrivere og hvis det er noen oppdateringer som venter i aksjon, anbefales det å laste ned og installere det samme. Følg guiden vår om hvordan du oppdaterer nettverksadapterdrivere på Windows 10 for å gjøre det. Når du har oppdatert nettverksdriveren, omstart your computer and test the network connection. You will not 0x00028001 error code again.
Les også: Fix Ethernet har ikke en gyldig IP-konfigurasjonsfeil
Metode 15: Installer nettverksdriveren på nytt
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
Etter å ha installert nettverksdrivere på nytt, sjekk om du kan koble til nettverket uten problemer.
Metode 16: Tilbakestill nettverksdrivere
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
Etter at din Windows 10-datamaskin har installert den forrige versjonen av drivere, sjekk om du kan koble til nettverket uten avbrudd.
Metode 17: Tilbakestill nettverksinnstillinger
Flere brukere har erklært at tilbakestilling av nettverksinnstillinger vil løse merkelige nettverkstilkoblingsproblemer. Denne metoden vil glemme alle nettverkskonfigurasjonsinnstillingene, lagret legitimasjon og mye mer sikkerhetsprogramvare som VPN og antivirusprogrammer. For å gjøre det, følg guiden vår om hvordan du tilbakestiller nettverksinnstillinger på Windows 10
Les også: Slik konfigurerer du deling av nettverksfiler på Windows 10
Metode 18: Utfør systemgjenoppretting
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
Metode 19: Tilbakestill PC
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Metode 20: Kontakt Internett-leverandøren
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
Anbefalt:
Vi håper at denne veiledningen var nyttig og at du kunne fikse network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.