Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Starte på nytt og velg riktig oppstartsenhet
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Start på nytt og velg riktig oppstartsenhetsproblem [LØST]
Metode 1: Angi riktig oppstartsrekkefølge
You may be seeing the error “Starte på nytt og velg riktig oppstartsenhet” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Når datamaskinen starter (før oppstartsskjermen eller feilskjermbildet), trykker du flere ganger på Delete eller F1- eller F2-tasten (avhengig av datamaskinens produsent) for å gå inn i BIOS-oppsettet.
2. Når du er i BIOS-oppsettet, velg Boot-fanen fra listen over alternativer.
3. Kontroller nå at datamaskinen Harddisk eller SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, hvis ikke, fortsett.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
For å kjøre Diagnostics, start PC-en på nytt og når datamaskinen starter (før oppstartsskjermen), trykk på F12-tasten og når Boot-menyen vises, marker Boot to Utility Partition-alternativet eller Diagnostics-alternativet og trykk enter for å starte Diagnostics. Dette vil automatisk sjekke all maskinvaren til systemet ditt og vil rapportere tilbake hvis noe problem blir funnet.
Anbefalt: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Viktig: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Sett inn den oppstartbare installasjons-DVDen for Windows 10 og start PC-en på nytt.
2. Når du blir bedt om å trykke på en tast for å starte opp fra CD eller DVD, trykk på en tast for å fortsette.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Start på nytt og du har lykkes Fix Reboot and Select Proper Boot Device issue, hvis ikke, fortsett.
Les også Hvordan fikse Automatisk reparasjon kunne ikke reparere PC-en din.
Metode 5: Aktiver UEFI Boot
1. Start PC-en på nytt og trykk på F2 eller DEL avhengig av PC-en for å åpne Boot Setup.
2.The make the following changes:
Endre Boot list alternativet til UEFI Disable Load Legacy alternativ ROM Aktiver sikker oppstart
3. Deretter trykker du på F10 for å lagre og avslutte oppstartsoppsettet.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
OBS: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metode 7: Reparer Installer Windows 10
Hvis ingen av løsningene ovenfor fungerer for deg, kan du være sikker på at harddisken din er i orden, men du kan se feilen "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” fordi operativsystemet eller BCD-informasjonen på harddisken på en eller annen måte ble slettet. Vel, i dette tilfellet kan du prøve å reparere installer Windows, men hvis dette også mislykkes, er den eneste løsningen som gjenstår å installere en ny kopi av Windows (Ren installasjon).
Det er det du har lykkes med Fix Reboot and Select proper Boot device issue men hvis du fortsatt har spørsmål angående dette innlegget, spør dem gjerne i kommentarfeltet.