When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
Onetsetsani kuti mwapanga malo obwezeretsa ngati china chake chalakwika.
Method 1: Uninstall Graphic Card Driver
1. Right-click on your NVIDIA graphic card under device manager and select Yambani.
2. If asked for confirmation, select Yes.
3. Dinani Windows Key + X ndiye sankhani Gawo lowongolera.
4. From Control Panel, click on Chotsani Pulogalamu.
5. Ena, Chotsani zonse zokhudzana ndi Nvidia.
6. Reboot your system to save changes and tsitsaninso khwekhwe kuchokera patsamba la wopanga.
5. Once you are sure that you have removed everything, yesani kukhazikitsanso madalaivala. The setup should work without any problems.
Method 2: Update Graphic Card Drivers
1. Dinani Windows Key + R ndiye lembani devmgmt.msc ndikugunda Enter kuti mutsegule Chipangizo Choyang'anira.
2. Kenako, onjezerani Onetsani adapters ndikudina kumanja pa Nvidia Graphic Card yanu ndikusankha Yambitsani.
3. Once, you have done this again, right-click on your graphic card and select “Sinthani Pulogalamu Yoyendetsa."
4. Sankhani "Fufuzani pokhapokha kuti musinthidwe pulogalamu yamakondomu” ndipo mulole kuti amalize ndondomekoyi.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Sinthani Pulogalamu Yopalasita” koma nthawi ino pa zenera lotsatira sankhani “Sakanizani kompyuta yanga kwa pulogalamu ya dalaivala."
7. Now. select "Ndiroleni ine ndichotse pa mndandanda wa madalaivala apakompyuta yanga. "
8. Finally, select the compatible driver from your Nvidia Graphic Card list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Katundu.
2. Then click Makonda azotsogola kuchokera kumanzere kwa menyu.
Zindikirani: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl ndi kumenyana ndi Enter.
3. Pitani ku Zamkatimu tab if not already there and click Settings under Kuchita.
4. Now select the checkbox which says “Sinthani kuti muchite bwino."
5. Dinani Ikani, kenako CHABWINO.
6. Yambitsaninso PC yanu kuti musunge zosintha.
Method 4: Increase GPU processing time (Registry Fix)
1. Dinani Windows Key + R ndiye lembani regedit ndikugunda Enter kuti mutsegule Registry Editor.
2. Pitani ku kiyi yolembetsa ili pansipa:
HKEY_LOCAL_MACHINESYSTEMCongerControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click yatsopano and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
For 32-bit Windows:
a. Sankhani Phindu la DWORD (32-bit) ndi kujambula KumtMam as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
For 64-bit Windows:
a. Sankhani QWORD (64-bit) Value ndi kujambula KumtMam as the Name.
b. Double click on TdrDelay and lowetsani 8 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer kuchokera patsamba lovomerezeka la Microsoft.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
anati:
Ndi zomwe mwachita bwino Fix Display driver stopped responding and has recovered error [SOLVED] koma ngati muli ndi mafunso okhuza positiyi ndiye omasuka kuwafunsa mu gawo la ndemanga.