After installing the latest Windows feature update, your PC may be trapped in an automated repair cycle. This article will give you various troubleshooting techniques if you’re attempting to locate a repair approach that will allow you to resolve diagnosing your PC Windows 10 issue. So, continue reading to fix diagnosing your PC stuck issue on Windows 10.
How to Fix Stuck on Diagnosing your PC in Windows 10
We looked into this diagnosing your PC stuck issue by looking at multiple user reports and tried various repair strategies suggested by some impacted users. As it turns out, various conditions make your system trapped inside the diagnosing your PC screen. Here’s a list of circumstances that might lead to this issue on Windows 10.
- System File Corruption: Corrupted system files might also cause the System Diagnostic tool to appear at every system start-up. If this utility is also corrupted, it will be stuck in a loop.
- Inadequate System Space: As it turns out, this problem of this issue can also arise when the system lacks sufficient storage capacity to load all the programs and services required for the starting operation.
- Glitched Automated Repair Utility: This issue has been reported by multiple customers to be caused by mysterious system drive troubles. In this instance, the Automatic Repair program will try to open at every restart in an attempt to fix the problem, but it will be unable to locate the source of the problem.
- Faulty BCD Data: Corrupted booting data might also cause this issue in severe conditions, which prevents the starting process from finishing.
Some afflicted customers have attempted rebooting their computers to get rid of this problem but have claimed that their computers go into a dark screen, show the logo, and then return to the Diagnostic PC page. The operating system indicates that your device has been diagnosed, but there might be no progress made. You can follow the below methods to resolve the issue.
Method 1: Perform Hard Reboot
You can do a hard reboot if your Windows is unable to boot due to the Preparing Automatic Repair or Diagnosing your PC issue.
1. Chotsani AC Adapita ndi kuchotsa batire kuchokera ku chipangizo.
2. Check if it boots up normally by pressing and holding the batani la mphamvu chifukwa masekondi 20.
If this technique fails, try one of the following options.
Komanso Werengani: Momwe mungakonzere cholakwika cha WDF_VIOLATION mkati Windows 10
Njira 2: Yambani mu Safe Mode ndi Clear Space
As some users have discovered, this issue can also occur when the system does not have enough capacity to start. Several individuals in a similar position have overcome the problem by running their machines in Safe Mode and freeing up some space. Follow our guide on How to Boot to Safe Mode in Windows 10.
Then, perform Disk cleanup by following our guide to run Disk Cleanup.
If diagnosing your PC Windows 10 problem persists, follow the next procedure below.
Njira 3: Konzani Mafayilo Adongosolo
It’s also possible that this problem is caused by System File corruption. These corrupted files might prevent the booting procedure from finishing. You’ll have to run the scans before the Booting phase since you can’t go beyond the Diagnostics page. Read our guide on How to Repair System Files on Windows 10.
Komanso Werengani: Konzani Makompyuta Sanagwirizanenso Chifukwa Palibe Data Yanthawi Yopezeka
Method 4: Run System Restore Utility
You may be dealing with a serious corruption problem that can’t be treated traditionally. When faced with a circumstance like this, the best action is to take a damage-control strategy. Most start-up troubles caused by system file corruption can be resolved by returning the machine to a healthy condition in which all components are working properly. Follow the below steps.
1. Ikani fayilo ya unsembe chimbale ndi ayambanso PC yanu.
2. Dinani iliyonse chinsinsi to start up the installation media when you see the booting screen.
3. When Windows Setup has finished loading, click on Konzani kompyuta yanu.
4. Pezani mawonekedwe a Kusokoneza menu from the first repair menu.
5. Dinani zotsogola Mungasankhe from the Troubleshoot menu.
6. Kenako dinani Lamuzani mwamsanga from the list of available utilities.
7. Kutsegula Tswezeretsani program, type the rstrui.exe command into the Lamuzani mwamsanga zenera ndikusindikiza batani Lowani kiyi.
8. Dinani Ena once you’ve reached the first screen.
9. Tsopano, chongani the option labeled Onetsani zina zowonzanso.
10. Once you’ve done so, go through each restoration chithunzi and pick one taken before the Diagnostics problem.
11. To go on to the next option, choose the suitable chithunzi ndipo dinani Ena.
12. Tsopano, alemba pa chitsiriziro.
Your system will restart automatically after restoring, and the old machine will be fixed at the next system starting.
Method 5: Rebuild BCD
In Windows 10, you’ll get the Preparing Automatic Repair error if the boot files are missing or damaged. As a result, some users will re-build the boot record using the procedures below.
1. Insert the Windows bootable installation CD into the PC displaying the error message Preparing Automatic Repair or Diagnosing your PC.
2. Start your computer by booting from the kukhazikitsa CD.
3. To continue, choose your chilankhulo zoikamo ndi kumadula pa Ena batani.
4. Sankhani kukonza kompyuta yanu.
5. Sankhani Kusokoneza.
6. Sankhani Lamuzani mwamsanga.
7. Enter the instructions below into the prompt, and press the Lowani kiyi pambuyo pa wina aliyense.
bootrec / fixmbr bootrec / fixboot bootrec / scanos bootrec / rebuildbcd
8. Then, type the command Potulukira ndi kukanikiza Lowani kiyi.
9. Pomaliza, yambitsaninso PC.
Komanso Werengani: Momwe Mungakonzere Vuto la Kusintha kwa Windows 80072ee2
Njira 6: Lemekezani Kukonzekera Koyamba Kwadzidzidzi
If this happens, the Automatic Start-up Repair software will launch at every system start-up. However, if the utility is broken, you might not be able to go past the start-up screen. Therefore, disabling this software would prevent the Diagnosing your PC screen from appearing.
1. As soon as you see the introductory screen, press the F8 key repeatedly to get to the Zosankha za Boot Zapamwamba menu.
2. Sankhani Njira yotetezeka with Networking from the Advanced Boot Options menu by pressing the F5 kiyi or using the arrow keys.
3. When the booting routine is complete, press Makiyi a Windows + I kuti muyambe Kuthamanga bokosi lazokambirana.
4. Lembani cmd ndi kugunda Ctrl + Shift + Lowani makiyi to open an Lamulo Lalikulu lapamwamba.
5. Dinani inde posachedwa.
6. Lowetsani zotsatirazi lamulo Ndi kukanikiza Lowani kiyi.
bcdedit / set recoveryabled NO
7. Once the process is complete, yambitsaninso chipangizo chanu.
If diagnosing your PC Windows 10 problem persists or you don’t get a different error, continue the next procedure.
Njira 7: Chotsani Zosintha
If the update fails to install properly on your device, you might face this issue. Follow the below steps to resolve the discussed issue.
1. Menyani Chipangizo cha Windows ndi kujambula Gawo lowongolera, ndiye, dinani Open.
2. Tsopano, alemba pa Sulani pulogalamu Njira pansi pa mapulogalamu menyu monga zikuwonekera.
3. Tsopano, alemba pa Onani zosintha zowonjezera pagawo lakumanzere monga momwe zasonyezedwera.
4. Tsopano, fufuzani ndikusankha zosintha zaposachedwa kwambiri potengera Anaika Pa tsiku ndikudina Yambani njira monga pansipa.
5. Pomaliza, tsimikizirani mwamsanga ndi kuyambitsanso PC.
Check if diagnosing your PC stuck issue persists or not.
Komanso Werengani: Njira 7 Zokonzera Vuto la iaStorA.sys BSOD Windows 10
Method 8: Perform Repair Install
If none of the above-mentioned repair methods have worked, you’re probably dealing with a serious case of system corruption that can’t be fixed using normal methods. In this case, the only way to repair the problem is to reset every Windows component, including any booting-related tasks causing the Automatic Repair loop. You may always perform a clean installation but bear in mind that doing so will lose any saved data within your Windows system. If you choose a clean install, all your personal data, applications, games, documents, and other media will disappear. Read our guide on How to do a Clean Install of Windows 10 and implement the same.
anati:
We hope you found this information useful and that you were able to resolve stuck on diagnosing your PC in Windows 10 problem. Please let us know which technique was the most beneficial for you. Please use the form below if you have any queries or comments. Also, let us know what you want to learn next.