When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- ਪੁਰਾਣਾ ਓਪਰੇਟਿੰਗ ਸਿਸਟਮ।
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ਆਈਕੋਨ
2. If the status is set to ਜੁੜਿਆ ਨਹੀਂ, ਤੇ ਕਲਿੱਕ ਕਰੋ Network globe icon, choose your Wi-Fi network and click on ਜੁੜੋ button. Make sure ਏਅਰਪਲੇਨ ਮੋਡ ਚਾਲੂ ਨਹੀਂ ਹੈ.
3. If you again face the same network connection error code, then click on the ਡਿਸਕਨੈਕਟ ਕਰੋ button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi ਦੀ network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. 'ਤੇ ਸੱਜਾ ਬਟਨ ਦਬਾਓ Wi-Fi ਆਈਕਨ ਅਤੇ ਚੁਣੋ Open Network & Internet settings.
6. 'ਤੇ ਕਲਿੱਕ ਕਰੋ Wi-Fi ਦੀ.
7. Scroll down the right menu, click on ਜਾਣਿਆ ਨੈਟਵਰਕ ਵਿਵਸਥਿਤ ਕਰੋ.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select ਭੁੱਲਣਾ.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
ਢੰਗ 2: ਰਾਊਟਰ ਨੂੰ ਰੀਸਟਾਰਟ ਕਰੋ
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
ਨੋਟ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. ਲੱਭੋ ਪਾਵਰ ਬਟਨ ਤੁਹਾਡੇ ਰਾਊਟਰ ਦੇ ਪਿਛਲੇ ਪਾਸੇ.
2. ਬਟਨ ਨੂੰ ਇੱਕ ਵਾਰ ਦਬਾਓ ਇਸਨੂੰ ਬੰਦ ਕਰ ਦਿਓ.
3. ਹੁਣ, ਡਿਸਕਨੈਕਟ ਕਰੋ ਆਪਣੇ Router power cable ਅਤੇ ਉਦੋਂ ਤੱਕ ਇੰਤਜ਼ਾਰ ਕਰੋ ਜਦੋਂ ਤੱਕ ਕੈਪਸੀਟਰਾਂ ਤੋਂ ਪਾਵਰ ਪੂਰੀ ਤਰ੍ਹਾਂ ਖਤਮ ਨਹੀਂ ਹੋ ਜਾਂਦੀ।
4. ਫਿਰ, ਦੁਬਾਰਾ ਕੁਨੈਕਟ ਕਰੋ The ਪਾਵਰ ਕੇਬਲ ਅਤੇ ਇੱਕ ਮਿੰਟ ਬਾਅਦ ਇਸਨੂੰ ਚਾਲੂ ਕਰੋ।
5. ਨੈੱਟਵਰਕ ਕਨੈਕਸ਼ਨ ਮੁੜ-ਸਥਾਪਿਤ ਹੋਣ ਤੱਕ ਉਡੀਕ ਕਰੋ ਅਤੇ ਦੁਬਾਰਾ ਸਾਈਨ ਇਨ ਕਰਨ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰੋ.
ਇਹ ਵੀ ਪੜ੍ਹੋ: ਵਿੰਡੋਜ਼ 10 ਵਿੱਚ ਨੈੱਟਵਰਕ 'ਤੇ ਦਿਖਾਈ ਨਾ ਦੇਣ ਵਾਲੇ ਕੰਪਿਊਟਰਾਂ ਨੂੰ ਠੀਕ ਕਰੋ
3ੰਗ XNUMX: ਨੈਟਵਰਕ ਟ੍ਰਬਲਸ਼ੂਟਰ ਚਲਾਓ
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. ਨੂੰ ਮਾਰੋ ਵਿੰਡੋਜ਼ ਕੁੰਜੀ ਅਤੇ ਟਾਈਪ ਕਰੋ ਸਮੱਸਿਆ ਨਿਪਟਾਰਾ ਸੈਟਿੰਗਜ਼ ਸਰਚ ਬਾਰ ਵਿੱਚ ਅਤੇ ਖੋਲ੍ਹੋ।
2. 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਅਤਿਰਿਕਤ ਸਮੱਸਿਆ-ਨਿਵਾਰਕ.
3. ਚੁਣੋ ਨੈੱਟਵਰਕ ਅਡਾਪਟਰ ਅਤੇ 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਸਮੱਸਿਆ ਨਿਵਾਰਕ ਚਲਾਓ.
4. Select the network adapter to diagnose ਅਤੇ 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਅਗਲਾ.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, ਤੇ ਕਲਿੱਕ ਕਰੋ ਟ੍ਰੱਬਲਸ਼ੂਟਰ ਬੰਦ ਕਰੋ.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
ਇਹ ਵੀ ਪੜ੍ਹੋ: ਫੈਮਿਲੀ ਸ਼ੇਅਰਿੰਗ YouTube ਟੀਵੀ ਕੰਮ ਨਹੀਂ ਕਰ ਰਹੀ ਨੂੰ ਠੀਕ ਕਰੋ
ਢੰਗ 4: ਸਿਸਟਮ ਫਾਈਲਾਂ ਦੀ ਮੁਰੰਮਤ ਕਰੋ
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (ਸਿਸਟਮ ਫਾਈਲ ਚੈਕਰ) /DISM (ਡਿਪਲੋਮੇਮੈਂਟ ਚਿੱਤਰ ਸਰਵਿਸਿੰਗ ਅਤੇ ਮੈਨੇਜਮੈਂਟ) utilities on your Windows 10 PC.
1. ਨੂੰ ਮਾਰੋ ਵਿੰਡੋਜ਼ ਕੁੰਜੀਦੀ ਕਿਸਮ ਕਮਾਂਡ ਪੁੱਛੋ ਅਤੇ 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਪ੍ਰਬੰਧਕ ਦੇ ਰੂਪ ਵਿੱਚ ਚਲਾਓ.
2. 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਜੀ ਵਿੱਚ ਉਪਭੋਗਤਾ ਖਾਤਾ ਨਿਯੰਤਰਣ ਪ੍ਰਾਉਟ
3. ਟਾਈਪ ਕਰੋ chkdsk C: / f / r / x ਹੁਕਮ ਅਤੇ ਹਿੱਟ ਕੁੰਜੀ ਦਿਓ.
4. ਜੇਕਰ ਤੁਹਾਨੂੰ ਇੱਕ ਸੰਦੇਸ਼ ਨਾਲ ਪੁੱਛਿਆ ਜਾਂਦਾ ਹੈ, Chkdsk ਨਹੀਂ ਚੱਲ ਸਕਦਾ... ਵਾਲੀਅਮ ਹੈ... ਵਰਤੋਂ ਦੀ ਪ੍ਰਕਿਰਿਆ ਵਿੱਚ ਹੈ, ਫਿਰ, ਟਾਈਪ ਕਰੋ Y ਅਤੇ ਮਾਰਿਆ ਕੁੰਜੀ ਦਿਓ.
5. ਦੁਬਾਰਾ, ਕਮਾਂਡ ਟਾਈਪ ਕਰੋ: sfc / scannow ਅਤੇ ਦਬਾਓ ਕੁੰਜੀ ਦਿਓ ਨੂੰ ਚਲਾਉਣ ਲਈ ਸਿਸਟਮ ਫਾਈਲ ਚੈਕਰ ਸਕੈਨ.
ਨੋਟ: ਇੱਕ ਸਿਸਟਮ ਸਕੈਨ ਸ਼ੁਰੂ ਕੀਤਾ ਜਾਵੇਗਾ ਅਤੇ ਇਸਨੂੰ ਪੂਰਾ ਕਰਨ ਵਿੱਚ ਕੁਝ ਮਿੰਟ ਲੱਗਣਗੇ। ਇਸ ਦੌਰਾਨ, ਤੁਸੀਂ ਹੋਰ ਗਤੀਵਿਧੀਆਂ ਕਰਨਾ ਜਾਰੀ ਰੱਖ ਸਕਦੇ ਹੋ ਪਰ ਖਿੜਕੀ ਨੂੰ ਅਚਾਨਕ ਬੰਦ ਨਾ ਕਰਨ ਦਾ ਧਿਆਨ ਰੱਖੋ।
ਸਕੈਨ ਨੂੰ ਪੂਰਾ ਕਰਨ ਤੋਂ ਬਾਅਦ, ਇਹ ਇਹਨਾਂ ਵਿੱਚੋਂ ਕੋਈ ਵੀ ਸੁਨੇਹਾ ਦਿਖਾਏਗਾ:
- ਵਿੰਡੋਜ਼ ਰਿਸੋਰਸ ਪ੍ਰੋਟੈਕਸ਼ਨ ਨੂੰ ਇਕਸਾਰਤਾ ਦੀ ਉਲੰਘਣਾ ਨਹੀਂ ਮਿਲੀ.
- ਵਿੰਡੋਜ਼ ਰਿਸੋਰਸ ਪ੍ਰੋਟੈਕਸ਼ਨ ਬੇਨਤੀ ਕੀਤੀ ਕਾਰਵਾਈ ਨਹੀਂ ਕਰ ਸਕਿਆ।
- ਵਿੰਡੋਜ਼ ਰਿਸੋਰਸ ਪ੍ਰੋਟੈਕਸ਼ਨ ਨੇ ਖਰਾਬ ਫਾਈਲਾਂ ਲੱਭੀਆਂ ਅਤੇ ਉਹਨਾਂ ਦੀ ਸਫਲਤਾਪੂਰਵਕ ਮੁਰੰਮਤ ਕੀਤੀ।
- ਵਿੰਡੋਜ਼ ਰਿਸੋਰਸ ਪ੍ਰੋਟੈਕਸ਼ਨ ਨੂੰ ਖਰਾਬ ਫਾਈਲਾਂ ਮਿਲੀਆਂ ਪਰ ਉਹਨਾਂ ਵਿੱਚੋਂ ਕੁਝ ਨੂੰ ਠੀਕ ਕਰਨ ਵਿੱਚ ਅਸਮਰੱਥ ਸੀ।
6. ਸਕੈਨ ਪੂਰਾ ਹੋਣ ਤੋਂ ਬਾਅਦ, ਮੁੜ ਚਾਲੂ ਕਰੋ ਤੁਹਾਡਾ ਕੰਪਿਟਰ.
7. ਦੁਬਾਰਾ, ਲਾਂਚ ਕਰੋ ਪ੍ਰਬੰਧਕ ਦੇ ਤੌਰ ਤੇ ਕਮਾਂਡ ਪ੍ਰੋਂਪਟ ਅਤੇ ਦਿੱਤੀਆਂ ਕਮਾਂਡਾਂ ਨੂੰ ਇੱਕ ਤੋਂ ਬਾਅਦ ਇੱਕ ਚਲਾਓ:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
ਨੋਟ: DISM ਕਮਾਂਡਾਂ ਨੂੰ ਸਹੀ ਢੰਗ ਨਾਲ ਚਲਾਉਣ ਲਈ ਤੁਹਾਡੇ ਕੋਲ ਇੱਕ ਕਾਰਜਸ਼ੀਲ ਇੰਟਰਨੈਟ ਕਨੈਕਸ਼ਨ ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ।
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
ਢੰਗ 5: ਨੈੱਟਵਰਕ ਅਡਾਪਟਰ ਨੂੰ ਮੁੜ-ਯੋਗ ਕਰੋ
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. ਨੂੰ ਮਾਰੋ ਵਿੰਡੋਜ਼ ਕੁੰਜੀ ਅਤੇ ਟਾਈਪ ਕਰੋ ਡਿਵਾਇਸ ਪ੍ਰਬੰਧਕ in the Windows search menu. Click on ਓਪਨ.
2. ਦਾ ਵਿਸਤਾਰ ਕਰੋ ਨੈੱਟਵਰਕ ਅਡੈਪਟਰ ਇਸ 'ਤੇ ਡਬਲ-ਕਲਿੱਕ ਕਰਕੇ ਭਾਗ.
3. ਤੁਹਾਡੇ 'ਤੇ ਸੱਜਾ-ਕਲਿੱਕ ਕਰੋ ਨੈੱਟਵਰਕ ਡਰਾਈਵਰ (ਉਦਾਹਰਣ ਲਈ, Intel (R) Dual Band Wireless-AC 3168) ਅਤੇ ਇਸ ਦੀ ਚੋਣ ਕਰੋ ਡਿਵਾਈਸ ਨੂੰ ਅਸਮਰੱਥ ਬਣਾਓ ਚੋਣ ਨੂੰ.
4. Confirm the below prompt by clicking on ਜੀ.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the ਡਿਵਾਈਸ ਨੂੰ ਸਮਰੱਥ ਬਣਾਓ ਚੋਣ ਨੂੰ.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
ਇਹ ਵੀ ਪੜ੍ਹੋ: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. ਖੋਜ ਮੀਨੂ 'ਤੇ ਜਾਓ ਅਤੇ ਟਾਈਪ ਕਰੋ ਸੀ.ਐਮ.ਡੀ.. 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਪ੍ਰਬੰਧਕ ਦੇ ਰੂਪ ਵਿੱਚ ਚਲਾਓ.
2. ਹੇਠ ਲਿਖੇ ਨੂੰ ਟਾਈਪ ਕਰੋ ਕਮਾਂਡਾਂ ਅਤੇ ਮਾਰਿਆ ਕੁੰਜੀ ਦਿਓ.
netsh winsock ਰੀਸੈਟ netsh int ip ਰੀਸੈਟ ipconfig / ਰੀਲੀਜ਼ ipconfig / ਰੀਨਿਊ
3. ਕਮਾਂਡਾਂ ਦੇ ਚੱਲਣ ਦੀ ਉਡੀਕ ਕਰੋ ਅਤੇ ਆਪਣੇ ਕੰਪਿ rebਟਰ ਨੂੰ ਮੁੜ ਚਾਲੂ ਕਰੋ.
ਢੰਗ 7: DNS ਕੈਸ਼ ਫਲੱਸ਼ ਕਰੋ
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1 ਚਲਾਓ ਕਮਾਂਡ ਪੁੱਛੋ by searching in the Windows ਨੂੰ ਮੇਨੂ and click on Run as administrator.
2. ਟਾਈਪ ਕਰੋ ipconfig / flushdns in the command window and hit ਦਿਓ.
ਇਹ ਵੀ ਪੜ੍ਹੋ: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. ਚਲਾਓ ਚਲਾਓ ਦਬਾ ਕੇ ਡਾਇਲਾਗ ਬਾਕਸ ਵਿੰਡੋਜ਼ + ਆਰ ਕੁੰਜੀਆਂ ਇਕੱਠੇ.
2. ਟਾਈਪ ਕਰੋ ncpa.cpl ਅਤੇ ਹਿੱਟ ਕਰੋ ਕੁੰਜੀ ਦਿਓ.
3. Right-click on your active ਨੈੱਟਵਰਕ ਅਡੈਪਟਰ ਅਤੇ 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਵਿਸ਼ੇਸ਼ਤਾ.
4. ਦਾ ਨਿਸ਼ਾਨ ਹਟਾਓ ਇੰਟਰਨੈਟ ਪ੍ਰੋਟੋਕੋਲ ਵਰਜਨ 6 (ਟੀਸੀਪੀ / ਆਈਪੀਵੀ 6) ਚੋਣ ਨੂੰ.
5. ਅੰਤ ਵਿੱਚ, 'ਤੇ ਕਲਿੱਕ ਕਰੋ OK to save the changes and check if the issue is resolved.
ਨੋਟ: If you use multiple network connections, navigate to ਨੈਟਵਰਕ ਅਤੇ ਸ਼ੇਅਰਿੰਗ ਸੈਂਟਰ ਅਤੇ ਅਡੈਪਟਰ ਬਦਲੋ settings. Right-click on the adapter and select ਅਸਮਰੱਥ ਕਰੋ. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. ਟਾਈਪ ਕਰੋ ਡਿਵਾਇਸ ਪ੍ਰਬੰਧਕ in the Windows search menu and click ਓਪਨ.
2. 'ਤੇ ਡਬਲ ਕਲਿੱਕ ਕਰੋ ਨੈੱਟਵਰਕ ਅਡੈਪਟਰ ਇਸ ਨੂੰ ਵਧਾਉਣ ਲਈ.
3. ਤੁਹਾਡੇ 'ਤੇ ਸੱਜਾ-ਕਲਿੱਕ ਕਰੋ ਡਰਾਈਵਰ (ਉਦਾਹਰਣ ਵਜੋਂ Intel(R) ਡਿਊਲ ਬੈਂਡ ਵਾਇਰਲੈੱਸ-AC 3168) ਅਤੇ ਕਲਿੱਕ ਕਰੋ ਅੱਪਡੇਟ ਡਰਾਈਵਰ.
4. 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਮੇਰੇ ਕੰਪਿ computerਟਰ ਨੂੰ ਡਰਾਈਵਰਾਂ ਲਈ ਬਰਾ Browseਜ਼ ਕਰੋ to locate and install a driver manually.
5 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਬਰਾਊਜ਼ਰ button to choose any directory and click on ਅਗਲਾ.
5A. The drivers will be updated to the latest version if they are not updated.
5ਬੀ. ਜੇ ਉਹ ਪਹਿਲਾਂ ਤੋਂ ਹੀ ਇੱਕ ਅੱਪਡੇਟ ਪੜਾਅ ਵਿੱਚ ਹਨ, ਤਾਂ ਸਕ੍ਰੀਨ ਹੇਠਾਂ ਦਿੱਤੇ ਸੰਦੇਸ਼ ਨੂੰ ਪ੍ਰਦਰਸ਼ਿਤ ਕਰਦੀ ਹੈ, ਤੁਹਾਡੀ ਡਿਵਾਈਸ ਲਈ ਸਭ ਤੋਂ ਵਧੀਆ ਡਰਾਈਵਰ ਪਹਿਲਾਂ ਹੀ ਸਥਾਪਿਤ ਹਨ.
6. 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਬੰਦ ਕਰੋ ਵਿੰਡੋ ਨੂੰ ਬੰਦ ਕਰਨ ਲਈ.
7. ਰੀਸਟਾਰਟ ਕਰੋ the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1 ਚਲਾਓ ਡਿਵਾਇਸ ਪ੍ਰਬੰਧਕ from the Windows search menu.
2. 'ਤੇ ਸੱਜਾ ਬਟਨ ਦਬਾਓ ਡਰਾਈਵਰ ਅਤੇ ਚੁਣੋ ਅਣਇੰਸਟੌਲ ਯੰਤਰ.
3. A warning prompt will be displayed on the screen. Check the box “ਇਸ ਡਿਵਾਈਸ ਲਈ ਡ੍ਰਾਈਵਰ ਸੌਫਟਵੇਅਰ ਨੂੰ ਮਿਟਾਓ” and confirm the prompt by clicking ਅਣਇੰਸਟੌਲ ਕਰੋ.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. ਆਓ ਨਿਰਮਾਤਾ ਦੀ ਵੈਬਸਾਈਟ.
2. ਲੱਭੋ ਅਤੇ ਡਾਊਨਲੋਡ the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the ਡਾਊਨਲੋਡ ਕੀਤੀ ਫਾਈਲ ਅਤੇ ਇਸ ਨੂੰ ਇੰਸਟਾਲ ਕਰਨ ਲਈ ਦਿੱਤੀਆਂ ਹਦਾਇਤਾਂ ਦੀ ਪਾਲਣਾ ਕਰੋ।
ਇਹ ਵੀ ਪੜ੍ਹੋ: ਵਿੰਡੋਜ਼ 10 'ਤੇ ਵੀਪੀਐਨ ਨੂੰ ਕਿਵੇਂ ਸੈਟ ਅਪ ਕਰਨਾ ਹੈ
ਢੰਗ 10: ਵਿੰਡੋਜ਼ ਨੂੰ ਅੱਪਡੇਟ ਕਰੋ
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. ਦਬਾਓ ਵਿੰਡੋਜ਼ + ਆਈ ਕੁੰਜੀ ਖੋਲ੍ਹਣ ਲਈ ਇਕੱਠੇ ਸੈਟਿੰਗ ਤੁਹਾਡੇ ਕੰਪਿਊਟਰ ਤੇ.
2. ਚੁਣੋ ਅਪਡੇਟ ਅਤੇ ਸੁਰੱਖਿਆ.
3. ਚੁਣੋ ਅੱਪਡੇਟ ਲਈ ਚੈੱਕ ਕਰੋ.
4A. Click ਹੁਣ ਇੰਸਟਾਲ ਕਰੋ to download and install the latest update available.
4B. If your system is already up-to-date, then it will show ਤੁਸੀਂ ਅੱਪ ਟੂ ਡੇਟ ਹੋ ਸੁਨੇਹਾ
ਢੰਗ 11: ਹਾਲੀਆ ਅੱਪਡੇਟਾਂ ਨੂੰ ਅਣਇੰਸਟੌਲ ਕਰੋ
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. ਦਬਾਓ ਅਤੇ ਹੋਲਡ ਕਰੋ ਵਿੰਡੋਜ਼ + ਆਰ ਕੁੰਜੀਆਂ ਨੂੰ ਖੋਲ੍ਹਣ ਲਈ ਇਕੱਠੇ ਚਲਾਓ ਡਾਇਲੌਗ ਬੌਕਸ.
2. ਟਾਈਪ ਕਰੋ appwiz.cpl ਅਤੇ ਹਿੱਟ ਕਰੋ ਦਿਓ.
3. 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਇੰਸਟਾਲ ਕੀਤੇ ਅੱਪਡੇਟ ਵੇਖੋ.
4. Select the most recent update and click on ਅਣਇੰਸਟੌਲ ਕਰੋ.
5. Confirm the prompt, if any, and ਪੀਸੀ ਨੂੰ ਰੀਬੂਟ ਕਰੋ.
ਇਹ ਵੀ ਪੜ੍ਹੋ: ਫਾਇਰਫਾਕਸ ਲੋਡ ਨਾ ਹੋ ਰਹੇ ਪੰਨਿਆਂ ਨੂੰ ਕਿਵੇਂ ਠੀਕ ਕੀਤਾ ਜਾਵੇ
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the ਨੈੱਟਵਰਕ ਅਡਾਪਟਰ installed in your PC along with their settings. All the stored settings are stored to default settings.
ਨੋਟ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to ਸੈਟਿੰਗ ਫਿਰ ਸਿਸਟਮ ਅਤੇ ਬਾਰੇ. Once you have reset your network, you have to reinstall all networking software ਵਰਗੇ VPN ਕਲਾਇੰਟਸ or ਵਰਚੁਅਲ ਸਵਿੱਚ.
1. ਦਬਾਓ ਅਤੇ ਹੋਲਡ ਕਰੋ ਵਿੰਡੋਜ਼ + ਆਈ ਖੋਲ੍ਹਣ ਲਈ ਇਕੱਠੇ ਵਿੰਡੋਜ਼ ਸੈਟਿੰਗਜ਼.
2. 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਨੈੱਟਵਰਕ ਅਤੇ ਇੰਟਰਨੈੱਟ.
3. 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਨੈਟਵਰਕ ਰੀਸੈਟ ਅਧੀਨ ਸਥਿਤੀ.
4. Confirm the prompt by clicking on ਹੁਣ ਰੀਸੈਟ ਕਰੋ.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
ਸਿਫਾਰਸ਼ੀ:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. ਸਾਨੂੰ ਦੱਸੋ ਕਿ ਕਿਹੜਾ ਤਰੀਕਾ ਤੁਹਾਡੇ ਲਈ ਸਭ ਤੋਂ ਵਧੀਆ ਕੰਮ ਕਰਦਾ ਹੈ। ਨਾਲ ਹੀ, ਜੇਕਰ ਤੁਹਾਡੇ ਕੋਲ ਇਸ ਲੇਖ ਬਾਰੇ ਕੋਈ ਸਵਾਲ/ਸੁਝਾਅ ਹਨ, ਤਾਂ ਉਹਨਾਂ ਨੂੰ ਟਿੱਪਣੀ ਭਾਗ ਵਿੱਚ ਛੱਡਣ ਲਈ ਸੁਤੰਤਰ ਮਹਿਸੂਸ ਕਰੋ।