If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
Fix Network Adapter Missing in Windows 10
ਕੁਝ ਗਲਤ ਹੋਣ ਦੀ ਸਥਿਤੀ ਵਿੱਚ ਇੱਕ ਰੀਸਟੋਰ ਪੁਆਇੰਟ ਬਣਾਉਣਾ ਯਕੀਨੀ ਬਣਾਓ।
Method 1: Reboot your Computer
Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.
1 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਸਟਾਰਟ ਮੀਨੂ ਅਤੇ ਫਿਰ 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਪਾਵਰ ਬਟਨ available at the bottom left corner.
2. ਅੱਗੇ, 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਰੀਸਟਾਰਟ ਕਰੋ option and your computer will restart itself.
After the computer restarts, check if your problem is resolved or not.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. Now type the following command and press Enter after each one:
ipconfig / ਰੀਲੀਜ਼ ipconfig / flushdns ipconfig / ਰੀਨਿਊ
3. Again open Command Prompt and type the following command one by one and hit enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip reset netsh winsock reset
4. Reboot to apply changes. Flushing DNS seems to Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. ਵਿੰਡੋਜ਼ ਕੀ + ਆਰ ਦਬਾਓ ਫਿਰ ਟਾਈਪ ਕਰੋ services.msc ਅਤੇ Enter ਦਬਾਓ
2. ਲੱਭੋ WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. 'ਤੇ ਡਬਲ ਕਲਿਕ ਕਰੋ WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select ਆਟੋਮੈਟਿਕ.
5. Click Apply followed by OK.
6. 'ਤੇ ਸੱਜਾ ਬਟਨ ਦਬਾਓ WWAN AutoConfig Service ਅਤੇ ਚੁਣੋ ਸ਼ੁਰੂ ਕਰੋ
Method 4: Update Network Adapter Drivers
1. Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open ਡਿਵਾਇਸ ਪ੍ਰਬੰਧਕ.
2. ਫੈਲਾਓ ਨੈੱਟਵਰਕ ਅਡੈਪਟਰ, ਫਿਰ ਤੁਹਾਡੇ 'ਤੇ ਸੱਜਾ-ਕਲਿੱਕ ਕਰੋ ਵਾਈ-ਫਾਈ ਕੰਟਰੋਲਰ (ਉਦਾਹਰਨ ਲਈ Broadcom ਜਾਂ Intel) ਅਤੇ ਚੁਣੋ ਡਰਾਈਵਰ ਸਾਫਟਵੇਅਰ ਨੂੰ ਅਪਡੇਟ ਕਰੋ.
3. ਹੁਣ ਚੁਣੋ "Search for automatically for updated driver software".
4. ਹੁਣ Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. Once finished, close everything and reboot your PC.
6. If you’re still facing the Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select ਅੱਪਡੇਟ ਡਰਾਈਵਰ ਡਿਵਾਈਸ ਮੈਨੇਜਰ ਵਿੱਚ.
7. Now, in the Update Driver Software Windows, select “ਡਰਾਈਵਰ ਸੌਫਟਵੇਅਰ ਲਈ ਮੇਰੇ ਕੰਪਿਊਟਰ ਨੂੰ ਬ੍ਰਾਊਜ਼ ਕਰੋ."
8. ਹੁਣ ਚੁਣੋ "ਮੈਨੂੰ ਮੇਰੇ ਕੰਪਿਊਟਰ 'ਤੇ ਉਪਲਬਧ ਡਰਾਈਵਰਾਂ ਦੀ ਸੂਚੀ ਵਿੱਚੋਂ ਚੁਣਨ ਦਿਓ।"
9. ਕੋਸ਼ਿਸ਼ ਕਰੋ update drivers from the listed versions (make sure to checkmark compatible hardware).
10. If the above didn’t work then go to ਨਿਰਮਾਤਾ ਦੀ ਵੈੱਬਸਾਈਟ ਡਰਾਈਵਰ ਨੂੰ ਅਪਡੇਟ ਕਰਨ ਲਈ.
11. Download and install the latest driver from the manufacturer’s website then restart your PC.
Method 5: Uninstall Network Adapter Drivers
1. ਵਿੰਡੋਜ਼ ਕੀ + ਆਰ ਦਬਾਓ ਫਿਰ ਟਾਈਪ ਕਰੋ “devmgmt.msc” ਅਤੇ ਡਿਵਾਈਸ ਮੈਨੇਜਰ ਨੂੰ ਖੋਲ੍ਹਣ ਲਈ ਐਂਟਰ ਦਬਾਓ।
2. ਨੈੱਟਵਰਕ ਅਡਾਪਟਰਾਂ ਦਾ ਵਿਸਤਾਰ ਕਰੋ ਅਤੇ ਲੱਭੋ ਤੁਹਾਡੇ ਨੈੱਟਵਰਕ ਅਡਾਪਟਰ ਦਾ ਨਾਮ।
3. ਯਕੀਨੀ ਬਣਾਓ ਕਿ ਤੁਸੀਂ ਅਡਾਪਟਰ ਦਾ ਨਾਮ ਨੋਟ ਕਰੋ ਬੱਸ ਜੇ ਕੁਝ ਗਲਤ ਹੋ ਜਾਂਦਾ ਹੈ.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation ਹਾਂ ਚੁਣੋ.
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on ਐਕਸ਼ਨ ਫਿਰ "ਤੇ ਕਲਿੱਕ ਕਰੋਹਾਰਡਵੇਅਰ ਬਦਲਾਵਾਂ ਲਈ ਸਕੈਨ ਕਰੋ".
ਢੰਗ 6: ਯਕੀਨੀ ਬਣਾਓ ਕਿ ਵਿੰਡੋਜ਼ ਅੱਪ ਟੂ ਡੇਟ ਹੈ
1 ਪ੍ਰੈਸ ਵਿੰਡੋਜ਼ ਕੁੰਜੀ + I to open Settings then click on ਅਪਡੇਟ ਅਤੇ ਸੁਰੱਖਿਆ.
2. From the left-hand side, menu click on ਵਿੰਡੋਜ਼ ਅਪਡੇਟ.
3. Now click on the “ਅਪਡੇਟਾਂ ਲਈ ਚੈੱਕ ਕਰੋ” button to check for any available updates.
4. If any updates are pending then click on Download & Install updates.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
ਢੰਗ 7: ਨੈੱਟਵਰਕ ਅਡਾਪਟਰ ਟ੍ਰਬਲਸ਼ੂਟਰ ਚਲਾਓ
1. ਸੈਟਿੰਗਾਂ ਖੋਲ੍ਹਣ ਲਈ ਵਿੰਡੋਜ਼ ਕੁੰਜੀ + I ਦਬਾਓ ਅਤੇ ਫਿਰ ਕਲਿੱਕ ਕਰੋ ਅਪਡੇਟ ਅਤੇ ਸੁਰੱਖਿਆ.
2. From the left-hand menu select ਟ੍ਰਬਲਸ਼ੂਟ
3. Under Troubleshoot click on ਇੰਟਰਨੈੱਟ ਕੁਨੈਕਸ਼ਨ ਅਤੇ ਫਿਰ ਕਲਿੱਕ ਕਰੋ ਟ੍ਰੱਬਲਸ਼ੂਟਰ ਚਲਾਓ.
4. ਸਮੱਸਿਆ ਨਿਵਾਰਕ ਨੂੰ ਚਲਾਉਣ ਲਈ ਹੋਰ ਔਨ-ਸਕ੍ਰੀਨ ਨਿਰਦੇਸ਼ਾਂ ਦੀ ਪਾਲਣਾ ਕਰੋ।
5. If the above didn’t fix the issue then from the Troubleshoot window, click on ਨੈੱਟਵਰਕ ਅਡਾਪਟਰ ਅਤੇ ਫਿਰ 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਟ੍ਰੱਬਲਸ਼ੂਟਰ ਚਲਾਓ.
5. ਤਬਦੀਲੀਆਂ ਨੂੰ ਸੁਰੱਖਿਅਤ ਕਰਨ ਲਈ ਆਪਣੇ ਪੀਸੀ ਨੂੰ ਰੀਬੂਟ ਕਰੋ ਅਤੇ ਦੇਖੋ ਕਿ ਕੀ ਤੁਸੀਂ ਇਸ ਦੇ ਯੋਗ ਹੋ fix the Network Adapter Missing issue.
Method 8: Install Intel PROSet/Wireless Software
Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to fix Network Adapter Missing in Windows 10 issue. ਇਸ ਲਈ, ਇੱਥੇ ਜਾਓ and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Hence, read How to Update Network Adapter Drivers on Windows 10.
ਢੰਗ 9: ਨੈੱਟਵਰਕ ਕਨੈਕਸ਼ਨ ਰੀਸੈਟ ਕਰੋ
1. ਸੈਟਿੰਗਾਂ ਖੋਲ੍ਹਣ ਲਈ ਵਿੰਡੋਜ਼ ਕੁੰਜੀ + I ਦਬਾਓ ਅਤੇ ਫਿਰ ਕਲਿੱਕ ਕਰੋ ਨੈੱਟਵਰਕ ਅਤੇ ਇੰਟਰਨੈੱਟ।
2. From the left-hand menu select ਸਥਿਤੀ.
3. Now scroll down and click on ਨੈਟਵਰਕ ਰੀਸੈਟ ਹੇਠਾਂ.
4. ਫੇਰ ਕਲਿੱਕ ਕਰੋ “ਹੁਣ ਰੀਸੈਟ ਕਰੋ” under Network reset section.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
ਢੰਗ 10: ਸਿਸਟਮ ਰੀਸਟੋਰ ਕਰੋ
System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. ਵਿੰਡੋਜ਼ ਕੀ + ਐਕਸ ਦਬਾਓ ਫਿਰ ਚੁਣੋ ਕਮਾਂਡ ਪ੍ਰੋਂਪਟ (ਐਡਮਿਨ).
2. ਹੇਠ ਦਿੱਤੀ ਕਮਾਂਡ ਨੂੰ cmd ਵਿੱਚ ਟਾਈਪ ਕਰੋ ਅਤੇ ਐਂਟਰ ਦਬਾਓ:
netcfg –s n
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg ਮਿਟਾਓ HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u day_day
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. ਵਿੰਡੋਜ਼ ਕੀ + ਆਰ ਦਬਾਓ ਫਿਰ ਟਾਈਪ ਕਰੋ regedit ਅਤੇ Enter ਦਬਾਓ
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u day_day command in cmd.
10. ਤਬਦੀਲੀਆਂ ਨੂੰ ਬਚਾਉਣ ਲਈ ਆਪਣੇ ਪੀਸੀ ਨੂੰ ਰੀਬੂਟ ਕਰੋ।
ਤੁਹਾਡੇ ਲਈ ਸਿਫਾਰਸ਼ ਕੀਤੀ ਗਈ:
ਇਹ ਉਹ ਹੈ ਜੋ ਤੁਸੀਂ ਸਫਲਤਾਪੂਰਵਕ ਕੀਤਾ ਹੈ Fix Network Adapter Missing in Windows 10 ਪਰ ਜੇਕਰ ਤੁਹਾਡੇ ਕੋਲ ਅਜੇ ਵੀ ਇਸ ਪੋਸਟ ਬਾਰੇ ਕੋਈ ਸਵਾਲ ਹਨ ਤਾਂ ਟਿੱਪਣੀ ਦੇ ਭਾਗ ਵਿੱਚ ਉਹਨਾਂ ਨੂੰ ਪੁੱਛਣ ਲਈ ਬੇਝਿਜਕ ਮਹਿਸੂਸ ਕਰੋ।