When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
Pamiętaj, aby utworzyć punkt przywracania na wypadek, gdyby coś poszło nie tak.
Method 1: Uninstall Graphic Card Driver
1. Right-click on your NVIDIA graphic card under device manager and select Odinstaluj.
2. If asked for confirmation, select Yes.
3. Naciśnij klawisz Windows + X, a następnie wybierz Panel sterowania.
4. From Control Panel, click on Odinstaluj program.
5. Kolejny, uninstall everything related to Nvidia.
6. Reboot your system to save changes and again download the setup ze strony producenta.
5. Once you are sure that you have removed everything, try installing the drivers again. The setup should work without any problems.
Metoda 2: Zaktualizuj sterowniki karty graficznej
1. Naciśnij klawisz Windows + R, a następnie wpisz devmgmt.msc i naciśnij Enter, aby otworzyć Menedżera urządzeń.
2. Następnie rozwiń Karty graficzne and right-click on your Nvidia Graphic Card and select Włączyć.
3. Once, you have done this again, right-click on your graphic card and select “Zaktualizuj oprogramowanie sterownika."
4. Wybierz "Wyszukaj automatycznie zaktualizowane oprogramowanie sterownika” and let it finish the process.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Aktualizuj oprogramowanie sterownika” but this time on the next screen select “Przeglądaj mój komputer w poszukiwaniu oprogramowania sterownika."
7. Now. select "Pozwól mi wybrać z listy sterowników urządzeń na moim komputerze".
8. Finally, select the compatible driver from your Nvidia Graphic Card list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Nieruchomości.
2. Następnie kliknij Zaawansowane ustawienia systemu z menu po lewej stronie.
Uwaga: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl i naciśnij Enter.
3. Przełącz na Zakładka Zaawansowane if not already there and click Settings under Wydajność.
4. Now select the checkbox which says “Dostosuj do najlepszej wydajności."
5. Kliknij Zastosuj, a następnie OK.
6. Uruchom ponownie komputer, aby zapisać zmiany.
Method 4: Increase GPU processing time (Registry Fix)
1. Naciśnij klawisz Windows + R, a następnie wpisz regedit i naciśnij Enter, aby otworzyć Edytor rejestru.
2. Przejdź do następującego klucza rejestru:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click Nowości and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
Dla 32-bitowego systemu Windows:
za. Wybierz DWORD (32-bit) Value i typ TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
Dla 64-bitowego systemu Windows:
za. Wybierz QWORD (64-bit) Value i typ TdrDelay as the Name.
b. Double click on TdrDelay and wprowadź 8 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
Polecamy:
To wszystko, co udało Ci się pomyślnie Fix Display driver stopped responding and has recovered error [SOLVED] ale jeśli nadal masz jakieś pytania dotyczące tego posta, możesz je zadać w sekcji komentarzy.