Fix Error 1962: No Operating System Found: If you are facing this error then it may be because of corrupt boot sequence or the boot order priority might be not configured correctly. In any case, you when you try to boot your PC you won’t be able to boot your operating system instead you will be faced with the Error 1962 No Operating System Found message and you won’t have any option but to restart your PC which will again land you on the same error message screen.
Error 1962: No operating system found. Boot sequence will automatically repeat.
The strange thing with the error 1962 is that user might be able to successfully boot to Windows after waiting for few hours but that might not be the case with everyone. So you can check if you can access your system after waiting for few hours. Whereas some affected users can’t even get into BIOS setup as the Error 1962 No Operating System Found message is displayed immediately after the computer boots up.
Well, now you know enough about error 1962 let’s see how to actually fix this error. The good thing about this error it can also be caused simply because of faulty SATA cable which connects your Hard disk to the motherboard. So you need to perform various checks in order to determine the cause of Error 1962 No Operating System Found message on boot. Without wasting any time let’s see how to actually fix this issue with the below-listed troubleshooting methods.
Błąd 1962: Nie znaleziono systemu operacyjnego [ROZWIĄZANE]
Before trying any advanced steps we need to check whether it’s a case of faulty Hard disk or the SATA cable. In order to check if the hard disk is working or not, connect it to another computer and verify if you’re able to access it, if you’re able to then it’s not the case of the faulty Hard disk. But if you’re still not able to access the hard disk on another PC then you need to replace your Hard disk.
Now check if the SATA cable is at fault, just use another PC cable in order to check if the cable is faulty. If this is the case then simply buying another SATA cable might fix the issue for you. Now that you have verified if it’s not the case of faulty HDD or SATA cable then you can continue to the below-listed steps.
Uwaga: In order to try below fixes you need to use Windows Installation or Recovery disc, so make sure you are ready with any one of them before hand.
Metoda 1: Uruchom automatyczną/naprawę startową
1. Włóż startową instalacyjną płytę DVD systemu Windows 10 i uruchom ponownie komputer.
2. Po wyświetleniu monitu Naciśnij dowolny klawisz, aby uruchomić komputer z dysku CD lub DVD, naciśnij dowolny klawisz, aby kontynuować.
3. Wybierz preferencje językowe i kliknij Dalej. Kliknij Napraw komputer w lewym dolnym rogu.
4. Na ekranie wyboru opcji kliknij Rozwiązywanie.
5. Na ekranie Rozwiązywanie problemów kliknij Zaawansowana opcja.
6. Na ekranie Opcje zaawansowane kliknij Naprawa automatyczna lub naprawa przy rozruchu.
7. Poczekaj, aż Automatyczne naprawy systemu Windows/uruchamianie kompletny.
8. Uruchom ponownie i pomyślnie Fix Error 1962 No Operating System Found.
Przeczytaj także Jak naprawić błąd Automatyczna naprawa nie mogła naprawić komputera.
Method 2: Run Diagnostic Test
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Aby uruchomić diagnostykę, uruchom ponownie komputer i podczas uruchamiania komputera (przed ekranem rozruchowym), naciśnij klawisz F12, a gdy pojawi się menu rozruchu, zaznacz opcję Uruchom do partycji narzędziowej lub opcję Diagnostyka i naciśnij klawisz Enter, aby uruchomić diagnostykę. Spowoduje to automatyczne sprawdzenie całego sprzętu w systemie i zwróci raport, jeśli zostanie znaleziony jakiś problem.
Method 3: Set correct boot order
You may be seeing the “Error 1962 No Operating System Found” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Po uruchomieniu komputera (przed wyświetleniem ekranu rozruchowego lub ekranem błędu) kilkakrotnie naciśnij klawisz Delete lub klawisz F1 lub F2 (w zależności od producenta komputera), aby wejdź do konfiguracji BIOS-u.
2. Po przejściu do konfiguracji BIOS wybierz zakładkę Boot z listy opcji.
3. Teraz upewnij się, że komputer Hard disk or SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Once above changes are done move to the Startup tab and make the following changes:
Podstawowa sekwencja rozruchowa
CSM: [Włącz]
Boot Mode: [Auto]
Boot Priority: [UEFI First]
Quick Boot: [Enable]
Boot up Num-lock Status: [On]
5.Press F10 to save and exit changes in the BIOS setup.
Metoda 4: Włącz rozruch UEFI
Most UEFI firmware (Unified Extensible firmware Interface) either contains bugs or are misleading. This is because of the frequent evolution of the firmware which has made UEFI too complicated. The Error 1962 No Operating System Found seems to be caused by UEFI firmware and when you reset or set the default value of UEFI it seems to fix the issue.
You have to configure CSM (Compatibility Support Module) to enable if you want to boot to a legacy Operating System (OS). If you have recently upgraded your Windows installation then this setting is disabled by default which disables the support for the older Operating System’s which in turn won’t let you boot to OS. Now be careful to set the UEFI as the first or only boot method (which is already the default value).
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Go to the Startup tab and make the following changes:
Zmień opcję listy rozruchowej na UEFI Wyłącz opcję ładowania starszej wersji ROM Włącz bezpieczny rozruch
3. Następnie dotknij F10, aby zapisać i wyjść z konfiguracji rozruchu.
Method 5: Restore your PC using Recovery Disc
1.Put in the Windows installation media or Recovery Drive/System Repair Disc and select your language preferences, and click Next
2.Click Naprawa Twój komputer na dole.
3.Now choose Rozwiązywanie , a następnie Zaawansowane opcje.
4..Finally, click on “Przywracanie systemu” and follow onscreen instructions to complete the restore.
5.Restart your PC and this step may have Fix Error 1962 No Operating System Found.
Metoda 6: Napraw instalację systemu Windows 10
Jeśli żadne z powyższych rozwiązań nie zadziała, możesz być pewien, że Twój dysk twardy jest w porządku, ale może pojawić się błąd „Error 1962 No Operating System Found”, ponieważ system operacyjny lub informacje BCD na dysku twardym zostały w jakiś sposób usunięte. Cóż, w tym przypadku możesz spróbować naprawić instalację systemu Windows, ale jeśli to również się nie powiedzie, jedynym rozwiązaniem jest zainstalowanie nowej kopii systemu Windows (czysta instalacja).
Polecany dla Ciebie:
To wszystko, co udało Ci się pomyślnie Fix Error 1962: No Operating System Found Jeśli jednak nadal masz jakieś pytania dotyczące tego przewodnika, możesz je zadać w sekcji komentarzy.