When you are enjoying your favorite song via Bluetooth headphones, the sound may sometimes be cut off without any reason. At this moment, you may feel infuriated and you may adjust your Bluetooth positions and angles, yet the Bluetooth audio stuttering continues to happen. Even though your Bluetooth headphones are fully charged, you cannot use them if it has any internal issues or if there are any incompatible audio settings on your Windows 10 computer. Don’t worry! You are not the only one who faces Bluetooth headphones stuttering Windows 10 issues. We have some effective amazing fixes for you that will bring your computer out of the trouble. So, continue reading.
How to Fix Bluetooth Headphones Stuttering on Windows 10
Here are some common reasons that cause Bluetooth audio stuttering issues on Windows 10. Analyze them deeply to find out the exact cause in your case.
- Bluetooth battery is running low.
- Bluetooth device is far away from the signal source.
- Signal mismatch.
- Human body is interfering with the Bluetooth signal.
- One or more Bluetooth devices are on at the same time.
- Outdated firmware.
- Outdated Operating System and incompatible audio drivers.
- Time to upgrade; headphones are age-old!
In this section, we have compiled a list of methods that help you troubleshoot Bluetooth headphones stuttering Windows 10 issues. Firstly check and fix the hardware problems and then move ahead to Windows troubleshooting methods as instructed below.
Method 1: Charge Bluetooth Battery
You may sometimes analyse when Bluetooth headphones lose charge, the audio may turn out choppy. In this case, you have to charge your Bluetooth device and always make sure there is a minimum level of power to avoid any audio problems.
In some latest Bluetooth devices, the battery level can be identified by colour code. For example, in the OnePlus Earbuds,
- Zielony – Indicates battery level is optimum for use.
- Czerwony – Indicates battery level is very low and needs charging.
So, what if the battery level is adequate, but still facing Bluetooth headphones stuttering Windows 10? Check and try the following methods!
Method 2: Maintain Bluetooth Signal Range
Bluetooth devices make use of short wave radio signals and when you are out of range, you cannot hear the audio properly and the audio disconnects later. Your Bluetooth device manufacturer would have mentioned the signal range of your device on the package. Check it out or browse the internet to find out the coverage range. Then, maintain the same distance as mentioned. Check if this works.
Przeczytaj także: How to Install Bluetooth on Windows 10
Method 3: Avoid Cross Body Interference
You may sometimes face Bluetooth headphones stuttering Windows 10 when you are keeping one of the Bluetooth devices on your pant trousers or your palm and the other on your ear.
This may be due to the 70% + water content in your body. Bluetooth radio waves travel very bad over waterlogging substances, if you are in this situation, please change the position of Bluetooth devices.
Method 4: Remove Problematic Obstructions
Similarly, if there are any metallic interruptions, Bluetooth waves bounce out and you may face Bluetooth audio stuttering issue on your Windows 10 PC. Likewise, if there is any wzmocniony beton (such as a wall) substance between your computer and Bluetooth device, you may face audio stuttering issues. You are advised to remove these obstructions and sit near your Bluetooth device and computer.
Method 5: Avoid Placing Devices with High Wi-Fi Range
Several modern wireless devices like smart bulbs, high range routers, cordless phones, Wi-Fi routers, and monitors employ high Wi-Fi range signals, and some may even work with 2.4 GHz – 2.5Ghz.
Also, if you are using a Bluetooth device, avoid Wi-Fi interferences in the transmission paths. In addition to this, remove extra Bluetooth connections connected to your computer and check if you face the problem again.
Method 6: Use USB Cable (For Bluetooth Dongle Users)
In some cases, electrical interference between the module of your motherboard and your Bluetooth device may cause Bluetooth audio stuttering issue. This problem can be resolved by increasing the distance between the USB dongle and the USB port on Windows 10.
Przeczytaj także: How to Rename Bluetooth Devices on Windows 10
Method 7: Reconnect Bluetooth
As of now, you have followed hardware troubleshooting methods to fix Bluetooth headphones stuttering Windows 10 issue. Still, if you did not attain any fix, then the problem is not with your hardware. To troubleshoot temporary problems associated with your Bluetooth device and your computer, turn off the Bluetooth and turn it on again after some time as instructed below.
1. wciśnij Klawisz Windows i typ Ustawienia Bluetooth, then hit Przycisk ENTER.
2. Teraz wyłącz Bluetooth ikona jak pokazano.
3. Wait for a while and toggle ON the same setting again.
Check if you have fixed Bluetooth audio stuttering issue on Windows 10.
Method 8: Select Correct Audio Output
When you are using more than one audio output device, you have to confirm whether Bluetooth device is used up as an output device. To check the audio output in your Windows 10 PC, follow the below-mentioned steps.
1. Kliknij na Speakers icon at the right corner of the Pasek zadań.
2. Teraz kliknij ikona strzałki to expand the list of audio devices connected to the computer.
3. Then, select the audio device (your Bluetooth device) and make sure the audio is playing through the selected device.
If this method doesn’t help you, move ahead to the next one.
Przeczytaj także: How to Fix Bluetooth problems in Windows 10
Metoda 9: Uruchom narzędzie do rozwiązywania problemów z Bluetooth
Your Windows 10 computer has a built-in troubleshooter to fix many common problems arising from it. Likewise, you can fix Bluetooth headphones stuttering Windows 10 issue by running Bluetooth troubleshooter as instructed below.
1. wciśnij Klawisz Windows, rodzaj Rozwiązywanie problemów z ustawieniamii kliknij Otwarte.
2. Przewiń w dół do Znajdź i rozwiąż inne problemy
3. Tutaj wybierz Bluetooth i kliknij Uruchom narzędzie do rozwiązywania problemów opcja.
4. Windows will start Detecting problems. If there are any problems detected then follow on-screen instructions to Zastosuj poprawkę.
Method 10: Change Wi-Fi Bands
As discussed earlier, Bluetooth audio stuttering happens due to interference between two different wireless devices using the same frequency. To confirm this, you can take a simple hack of turning off your Wi-Fi router. After your Wi-Fi router is completely turned off check if you can fix Bluetooth headphones stuttering Windows 10 issue. If so, the problem is due to Wi-Fi and Bluetooth signal interferences. In this case, you can try switching between 2.4GHz and 5GHz Wi-Fi bands on your Windows 10 computer as instructed below.
1. Hit Klawisz Windowstyp menedżer urządzeńi kliknij Otwarte.
2. Kliknij dwukrotnie Adaptery sieciowe to expand the network drivers.
3. Then, right-click on your Wi-Fi adapter and click on Właściwości.
4. Teraz wyszukaj Pasmo or Preferowane pasmo opcja w Nieruchomość menu and click on it.
5. Teraz rozwiń rozwijane menu ukończenia wartość field and set the value as Preferuj pasmo 5GHz as shown. Then, click on OK zapisać zmiany.
Uwaga: If the value is already set to Preferuj pasmo 5GHz, then change the value to Prefer 2.4GHz i kliknij OK.
6. Wreszcie restart twój komputer and check if you have fixed Bluetooth audio stuttering issue.
Przeczytaj także: Napraw Bluetooth nie można wyłączyć w systemie Windows 10
Method 11: Re-enable Bluetooth Sound Card
You can easily resolve Bluetooth headphones stuttering Windows 10 issue by restarting the Bluetooth sound card as instructed below.
1. Hit Klawisz Windows i typ Device Manager, a następnie kliknij Otwarte.
2. Then, expand the Bluetooth sekcję, klikając ją dwukrotnie.
3. Then, right-click on your Bluetooth sound card I wybierz opcję Wyłącz urządzenie opcja.
4. Teraz potwierdź monit, klikając Tak i uruchom ponownie komputer. Then, repeat Kroki 1-2.
5. Next, right-click on your Bluetooth karta dźwiękowa I wybierz opcję Włącz urządzenie opcja.
6. Now, try playing any sound on Bluetooth device and check if the issue is resolved or not.
Metoda 12: Napraw uszkodzone pliki
For perfect audio quality services, a few essential files and programs must be functioning on your PC. But, if they are corrupt or misconfigured, you will face Bluetooth audio stuttering issues. Fortunately, all these corrupt misconfigured files can be repaired by using the inbuilt utilities of your Windows 10 PC namely, Kontroler plików systemowych i Obsługa i zarządzanie obrazem wdrożenia. Przeczytaj nasz przewodnik na temat naprawy plików systemowych w systemie Windows 10 i postępuj zgodnie z instrukcjami, aby naprawić wszystkie uszkodzone pliki.
Wait for the commands to be executed and check if you have fixed bluetooth issue on your PC.
Przeczytaj także: Napraw błąd sterownika Bluetooth w systemie Windows 10
Method 13: Restart Bluetooth Audio Services
A few essential Windows audio services will help you prevent Bluetooth audio stuttering issues in your Windows 10 PC. If in case, if these services are turned off, you may face several conflicts. Hence, you are advised to restart a few essential audio services as instructed below steps.
1. wciśnij Klawisz Windowstyp Usługii kliknij Uruchom jako administrator.
2. Teraz przewiń w dół i kliknij dwukrotnie Usługa wsparcia Bluetooth.
3. Now, in the new pop-up window, select the Typ uruchomienia do automatycznie, jak pokazano.
Uwaga: Jeśli Stan usługi is Zatrzymany, a następnie kliknij przycisk Start przycisk. Jeśli Stan usługi is Bieganie, kliknij Stop i Uruchom ponownie.
4. Kliknij na Zastosuj> OK zapisać zmiany.
Metoda 14: Wyłącz ulepszenia audio
If you find your audio working well for other multimedia resources, but the sound seems to be of low quality or noisy, you are advised to change the sample rate. A low-frequency sample rate will cause Bluetooth audio stuttering issue, yet you can select a higher frequency sample rate by following the below-mentioned steps.
1. Kliknij prawym przyciskiem myszy plik Speakers icon at the bottom right corner of the screen and select the Dźwięki opcja.
2. Następnie przejdź do Odtwarzanie tab and select the default Bluetooth audio device followed by the Właściwości przycisk, jak pokazano.
3. Następnie przejdź do Zaawansowane tab and from the drop-down menu under Domyślny format, make sure you select the highest frequency range (16 bit, 44100 Hz).
4. Teraz przejdź do Udoskonalenia tab and check the box corresponding to Wyłączyć wszystkie rozszerzenia jak pokazano.
5. Kliknij na Aplikuj , a następnie OK to save the changes. Check if you face Bluetooth audio stuttering issue again. If so, adjust different levels of frequency ranges by repeating these steps and confirm which range solves the problem.
Przeczytaj także: Fix Windows 10 Audio Crackling
Method 15: Disable Remote Control and Hands-free Telephony
Hands-free telephony is a Windows service that is used to enable your Bluetooth device to answer phone calls. But, it sometimes reduces the sound quality of your voice signal contributing to Bluetooth audio stuttering issue. Similarly, the Zdalne sterowanie feature also has its own disadvantages. If you wonder how to fix Bluetooth stuttering amidst these features, here are a few troubleshooting instructions.
1. Hit Klawisz Windows i typ Control Panel, then click on Otwarte.
2. Teraz kliknij Wyświetl urządzenia i drukarki link as shown.
3. Teraz kliknij prawym przyciskiem myszy swój Urządzenie Bluetooth i kliknij Właściwości jak pokazano.
4. In the next window, switch to the Usługi tab and uncheck the boxes, Hands-free Telephony i Zdalne sterowanie jak pokazano.
5. Na koniec kliknij Zastosuj> OK zapisać zmiany.
Method 16: Adjust Roaming Aggressiveness Settings
The Roaming Aggressiveness settings in your computer change the signal strength threshold at which Wi-Fi network adapters scan for other Access Point candidates to offer a better signal connection. But, when this setting is fixed to the highest setting, you will face Bluetooth headphones stuttering Windows 10 issue. You are advised to turn off the setting as instructed below.
1. Uruchom program Menadżer urządzeń od Windows Search.
2. Kliknij dwukrotnie Adaptery sieciowe to expand the network drivers.
3. Then, right-click on your Wi-Fi adapter and click on Właściwości.
4. Teraz wyszukaj Roaming Agresywność opcja w Nieruchomość listę i kliknij na nią.
5. Teraz ustaw wartość do Najniższy i kliknij OK.
Check if you have fixed Bluetooth audio stuttering issue.
Przeczytaj także: Napraw opóźnienie myszy Bluetooth w systemie Windows 10
Method 17: Disable Bluetooth Collaboration (If Applicable)
Broadcom Network adapter is software that helps your Bluetooth device to be connected to the internet. But this setting may interfere with your device settings causing the discussed problem. If you want to know how to fix Bluetooth stuttering by turning off this setting, please follow the below-listed instructions.
1. otwarte Device Manager i idź do Adaptery sieciowe, then right-click on your network driver and select Właściwości.
2. Teraz przejdź do Zakładka Zaawansowane i kliknij Bluetooth Collaboration pod Nieruchomość lista.
3. Then, expand the wartość drop-down list and click on Niepełnosprawni.
4. Na koniec kliknij OK to save the changes and check if you have fixed the issue.
Method 18: Update Bluetooth Drivers
Outdated and incompatible Bluetooth drivers will always result in Bluetooth headphones stuttering Windows 10 issue. Always ensure you use an updated version of drivers and if your computer lacks the latest drivers, you are advised to update them as instructed in our guide How to Update Realtek HD Audio Drivers in Windows 10.
Uwaga: Make sure you follow the same steps for Bluetooth Audio drivers jak pokazano poniżej.
Once you have updated your Bluetooth drivers to the latest version.
Przeczytaj także: Co to jest sterownik urządzenia? Jak to działa?
Method 19: Reinstall Bluetooth Drivers
Incompatible drivers must be reinstalled to resolve all audio related problems. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or by implementing the steps manually as instructed in our guide How to Uninstall and Reinstall Drivers on Windows 10. Follow the steps corresponding to Bluetooth drivers as depicted.
After reinstalling the audio drivers, check if you can hear the audio on your Bluetooth device.
Method 20: Roll Back Bluetooth Driver Updates
Sometimes, the current version of audio drivers may cause any audio conflicts and in this case, you have to restore previous versions of installed drivers. This process is called wycofanie sterowników i możesz łatwo przywrócić sterowniki komputera do poprzedniego stanu, postępując zgodnie z naszym przewodnikiem Jak przywrócić sterowniki w systemie Windows 10.
Wait until the previous versions of drivers are installed on your Windows 10 PC. Once done, check if you have fixed the issue.
Metoda 21: Zaktualizuj system Windows
If there are any new Microsoft updates pending to be installed on your PC, a few bugs and problems cannot be resolved on your computer. As suggested by many users, updating Windows 10 computers will help you resolve Bluetooth audio stuttering issue. Follow our guide How to Download and Install Windows 10 Latest Update to update your Windows 10 computer.
After updating your Windows Operating System, check whether you can access audio on Bluetooth device.
Przeczytaj także: How to Boost the Bass of Headphones and Speakers in Windows 10
Method 22: Reset Bluetooth Device
Still, if you are thinking about how to fix Bluetooth stuttering issue even after trying all these troubleshooting steps, then you must try factory resetting your device. The resetting process of many headphones involves pressing the power button for a particular extent of time. The steps to reset your device depends on the model you are using and for detailed instructions, follow the below-mentioned steps.
Uwaga: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
1. Disconnect your Urządzenie Bluetooth from Windows 10 PC.
2. Teraz naciśnij i przytrzymaj przycisk zasilania of your Bluetooth device for about 7 do 10 sekund.
3. A flash occurs (probably blue light) about 4 times.
4. Now all the settings and pairing information will be removed from your device.
5. Pair your device again and check if Bluetooth headphones stuttering Windows 10 issue is fixed now.
Uwaga: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
Method 23: Update Device Firmware
Firmware updates are released to resolve the problems and struggles reported on Bluetooth devices. You can update the firmware via apps and there are so many online platforms to support you in this process. If you have bought your Bluetooth device, seek professional support via email, since that’s the only means you can go for. On the other hand, if you have bought your Bluetooth device from a retail store, take your shoes and run to seek help from the retailer.
Polecamy:
Mamy nadzieję, że ten przewodnik był pomocny i można go naprawić bluetooth headphones stuttering on Windows 10. Feel free to reach out to us with your queries and suggestions via the comments section below.