Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Pamiętaj, aby utworzyć punkt przywracania na wypadek, gdyby coś poszło nie tak.
Metoda 1: Tymczasowo wyłącz program antywirusowy i zaporę ogniową
1. Kliknij prawym przyciskiem myszy Ikona programu antywirusowego z zasobnika systemowego i wybierz Wyłączyć.
2. Następnie wybierz przedział czasowy, dla którego Antywirus pozostanie wyłączony.
Uwaga: Wybierz możliwie najmniejszy czas, na przykład 15 minut lub 30 minut.
3.Once done, again check if the error resolves or not.
4. Naciśnij klawisz Windows + I, a następnie wybierz Panel sterowania.
5. Następnie kliknij System i bezpieczeństwo.
6. Następnie kliknij Zapora systemu Windows.
7. Teraz w lewym okienku kliknij opcję Włącz lub wyłącz Zaporę systemu Windows.
8.Wybierz Wyłącz Zaporę systemu Windows i uruchom ponownie komputer. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Jeśli powyższa metoda nie zadziała, wykonaj dokładnie te same kroki, aby ponownie włączyć zaporę sieciową.
Method 2: Delete Hidden Network Adapters
1. Naciśnij klawisz Windows + R, a następnie wpisz devmgmt.msc i naciśnij Enter, aby otworzyć Menadżer urządzeń.
2. Teraz wybierz Karty sieciowe a następnie kliknij Widok > Pokaż ukryte urządzenia.
3.Right-click on each of the hidden devices and select Odinstaluj urządzenie.
4.Do this for all the hidden devices listed under Network Adapters.
5. Uruchom ponownie komputer, aby zapisać zmiany.
Method 3: Turn ON Network Discovery
1. Naciśnij klawisz Windows + X, a następnie wybierz Panel sterowania.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings z menu po lewej stronie.
4.Check mark Włącz wykrywanie sieci and click Save changes.
5. Uruchom ponownie komputer, aby zapisać zmiany i sprawdzić, czy jesteś w stanie Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. Naciśnij klawisz Windows + R, a następnie wpisz ncpa.cpl i naciśnij Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select Nieruchomości.
3.Select 4 Protokół internetowy w wersji (TCP / IPv4) i kliknij Właściwości.
4.Teraz kliknij Zaawansowane in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Włącz NetBIOS przez TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. Naciśnij klawisz Windows + X, a następnie wybierz Panel sterowania.
2. Wpisz Poświadczenie in the control panel search and click on Menedżer poświadczeń.
3.Select Windows Credentials a następnie kliknij Add a Windows credential.
4.One by one type the Nazwa użytkownika i hasło of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Nieruchomości.
2.Przełącz na Karta udostępniania and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Zaznacz „Udostępnij ten folder” and make sure the Share name is correct.
4. Kliknij Zastosuj, a następnie OK.
Method 7: Change Network Security settings
1. Naciśnij klawisz Windows + R, a następnie wpisz secpol.msc i naciśnij Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. Kliknij dwukrotnie Bezpieczeństwo sieci: poziom uwierzytelniania LAN Manager in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. Kliknij Zastosuj, a następnie OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Metoda 8: Zresetuj protokół TCP/IP
1. Kliknij prawym przyciskiem myszy przycisk Windows i wybierz „Wiersz polecenia (administrator)."
2. Teraz wpisz następujące polecenie i po każdym naciśnij klawisz Enter:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3. Ponownie otwórz wiersz poleceń administratora i wpisz następujące polecenie, a po każdym z nich naciśnij klawisz Enter:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip zresetowane
- netsh winsock reset
4. Uruchom ponownie, aby zastosować zmiany.
Polecany dla Ciebie:
To wszystko, co udało Ci się pomyślnie Fix Error code 0x80070035 The network path was not found ale jeśli nadal masz jakieś pytania dotyczące tego posta, możesz je zadać w sekcji komentarzy.