When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- زوړ عملیاتي سیسټم.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe انځورن.
2. If the status is set to ندی تړلی، په کلیک وکړئ Network globe icon, choose your Wi-Fi network and click on سره نښلوي button. Make sure د الوتکې حالت ندی.
3. If you again face the same network connection error code, then click on the نښلول button, wait for some time and reconnect it again.
4. Try connecting to a different وای فای network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. په ښی کلیک وکړئ وائی فای icon او غوره Open Network & Internet settings.
6. کلیک وکړه وای فای.
7. Scroll down the right menu, click on پیژندل شوې شبکې اداره کړئ.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select هېرول.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
نوټ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. دا ومومئ د چالانېدو تڼۍ ستاسو د روټر شاته.
2. یو ځل تڼۍ فشار کړئ بند یې کړه
3. اوس ، ړنګول ستاسو Router power cable او تر هغه وخته پورې انتظار وکړئ چې بریښنا په بشپړه توګه د کیپسیټرونو څخه وچه شي.
4. بیا ، نښلول د بریښنا کیبل او د یوې دقیقې وروسته یې چالان کړئ.
5. انتظار وکړئ تر هغه چې د شبکې پیوستون بیا جوړ شي او بیا د ننوتلو هڅه وکړئ.
دا هم ولولئ: په وینډوز 10 کې په شبکه کې نه ښودل شوي کمپیوټرونه سم کړئ
3 میتود: د شبکې ټریبیټریټر پرمخ وړئ
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. ووهئ د وینډوز کیلي او ډول د ستونزو د حل تنظیمات د لټون بار کې او پرانیستی.
2. کلیک وکړه اضافي ستونزې حل کونکي.
3. غوره کړه د شبکې اډاپټر او کلیک وکړئ د ستونزې حل کوونکی چل کړئ.
4. Select the network adapter to diagnose او کلیک وکړئ بل.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem، کلیک وکړه ستونزه ټیټ کړئ.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
دا هم ولولئ: د کورنۍ شریکول د یوټیوب تلویزیون کار نه کوي
طریقه 4: د سیسټم فایلونه ترمیم کړئ
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (د سیسټم دوتنه کونکي) /DISM (د کار کولو انځور خدمتونه او مدیریت) utilities on your Windows 10 PC.
1. ووهئ د وینډوز کیليډول ډول د کمانټ پریمټ او کلیک وکړئ د مدیر په توګه چلول.
2. کلیک وکړه هو په کارن ګ Accountون مهار چټک.
3. ډول chkdsk C: / f / r / x امر وکړئ او ووهئ کیلي دننه کړئ.
4. که تاسو د یو پیغام سره هڅول کیږي، Chkdsk نشي چلولی… حجم دی… د کارونې په پروسه کېبیا، ټایپ کړئ Y او د ځپلو د کیلي دننه کړئ.
5. بیا، کمانډ ټایپ کړئ: sfc / scannow او مطبوعات کیلي دننه کړئ د چلولو لپاره د سیسټم دوتنه کونکي سکين.
نوټ: د سیسټم سکین به پیل شي او پای ته به یې څو دقیقې وخت ونیسي. په عین وخت کې، تاسو کولی شئ د نورو فعالیتونو ترسره کولو ته دوام ورکړئ مګر په پام کې ونیسئ چې په ناڅاپي توګه د کړکۍ بند نه کړئ.
د سکین بشپړولو وروسته، دا به د دې پیغامونو څخه یو وښيي:
- د وینډوز سرچینې محافظت هیڅ بشپړتیا سرغړونه ونه موندله.
- د وینډوز سرچینې محافظت نشي کولی غوښتل شوي عملیات ترسره کړي.
- د وینډوز سرچینې محافظت فاسد فایلونه وموندل او په بریالیتوب سره یې ترمیم کړل.
- د وینډوز سرچینې محافظت فاسد فایلونه موندلي مګر د دوی ځینې حل کولو توان نلري.
6. یوځل چې سکین پای ته ورسیږي، بیا روښانه کول ستاسو کمپیوټر.
7. بیا پیل کړئ د مدیر په توګه د مدیر په توګه او ورکړل شوي حکمونه یو له بل وروسته اجرا کړئ:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
نوټ: تاسو باید د DISM کمانډونو په سمه توګه اجرا کولو لپاره کاري انټرنیټ اتصال ولرئ.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. ووهئ د وینډوز کیلي او ډول د ډاټا مدیر in the Windows search menu. Click on د پرانیستې.
2. پراخ کړئ د شبکې اډیپټرې برخه په دوه ځله کلیک کولو سره.
3. په خپل ښي کلیک وکړئ د شبکې چلوونکی (د مثال په توګه، Intel (R) Dual Band Wireless-AC 3168) او غوره کړئ ناپېژانده وسیله انتخاب.
4. Confirm the below prompt by clicking on هو.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the فعال کول انتخاب.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
دا هم ولولئ: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. د لټون مینو ته لاړ شئ او ټایپ کړئ cmd. کلیک وکړه د مدیر په توګه چلول.
2. لاندې ټایپ کړئ حکمونه او د ځپلو د کیلي دننه کړئ.
netsh winsock بیاکتنه netsh int ip ری سیٹ ipconfig / release ipconfig / نوي
3. Wait for the commands to be executed and خپل کمپیوټر مو بیا پیل کړئ.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. پیل د کمانټ پریمټ by searching in the Windows غورنۍ and click on Run as administrator.
2. ډول ipconfig / flushdns in the command window and hit وليکئ.
دا هم ولولئ: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. پیل کړئ د دويم د ډیالوګ بکس په فشارولو سره د وینډوز + R کیلي په ګډه.
2. ډول ncpa.cpl او مار کیلي دننه کړئ.
3. Right-click on your active جال اړوونى او کلیک وکړئ ځانتياوې.
4. غیر چیک کړئ د انټرنیټ پروتوکول نسخه 6 (TCP / IPv6) انتخاب.
5. په پای کې، کلیک وکړئ OK to save the changes and check if the issue is resolved.
نوټ: If you use multiple network connections, navigate to د شبکې او شریکولو مرکز او اډیپټر بدل کړئ settings. Right-click on the adapter and select نافعال. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. ډول د ډاټا مدیر in the Windows search menu and click د پرانیستې.
2. پر دوه ځله کلیک وکړئ د شبکې اډیپټرې د دې پراخول
3. په خپل ښي کلیک وکړئ چلوونکی (د مثال په توګه Intel (R) ډبل بانډ بې سیم AC 3168) او کلیک وکړئ اوسمهال موډل.
4. کلیک وکړه زما کمپیوټر د چلوونکو لپاره براوز کړئ to locate and install a driver manually.
5. په کلیک وکړئ د لټووني button to choose any directory and click on بل.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, ستاسو د وسیلې لپاره غوره چلوونکي لا دمخه نصب شوي.
6. کلیک وکړه نژدې د کړکۍ څخه وتل
7. بیا روښانه کول the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. پیل د ډاټا مدیر from the Windows search menu.
2. په ښی کلیک وکړئ چلوونکی او غوره انسټالولو وسیله.
3. A warning prompt will be displayed on the screen. Check the box “د دې وسیله لپاره د موبایل سافټویر لرې کړئ” and confirm the prompt by clicking لغوه کړه.
4. Download and install the drivers on your device either by a manual update or automatic update.
.5 ته مراجعه وکړئ د تولید کونکي ویب پا .ه.
2. دنده موندل او دانلود the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the ډاونلوډ شوی فایل and follow the given instructions to install it.
دا هم ولولئ: How to set up a VPN on Windows 10
میتود 10: وینډوز تازه کړئ
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. پرانستل وینډوز + زه تڼیو یوځای د خلاصولو لپاره امستنې ستا په کمپیوټر کې.
2. غوره کړه اوسمهالول.
3. غوره کړه د اوسمهالونو لپاره ګوري.
4A. Click اوس نصب کړئ د وروستي تازه معلوماتو ډاونلوډ او نصبولو لپاره.
4B. که ستاسو سیسټم لا دمخه تازه وي ، نو دا به وښیې تاسو د نیټې پورې یاست پیغام.
میتود 11: وروستي تازه معلومات غیر نصب کړئ
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. فشار ورکړئ او ونیسئ د وینډوز + R کیلي د خلاصولو لپاره یوځای د دويم د خبرو اترو بکس.
2. ډول اپلوز او مار وليکئ.
3. کلیک وکړه نصب شوي اوسمهالونه وګورئ.
4. Select the most recent update and click on لغوه کړه.
5. Confirm the prompt, if any, and PC بیا پیل کړئ.
دا هم ولولئ: د فایرفوکس نه پورته کولو پاڼې څنګه حل کړئ
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the د شبکې اډاپټرونه installed in your PC along with their settings. All the stored settings are stored to default settings.
نوټ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to امستنې نو سيستم او په اړه. Once you have reset your network, you have to reinstall all networking software په شان د VPN پیرودونکي or مجازی سویچونه.
1. فشار ورکړئ او ونیسئ وینډوز + I کیلي یوځای د خلاصولو لپاره وینډوز امستنې.
2. کلیک وکړه شبکه او انټرنیټ.
3. کلیک وکړه د شبکې بیا رغونه لاندې وضعیت.
4. په کلیک کولو سره سمدستي تایید کړئ اوس یې تنظیم کړئ.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
سپارښتنه:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.