Fix Error 1962: No Operating System Found: If you are facing this error then it may be because of corrupt boot sequence or the boot order priority might be not configured correctly. In any case, you when you try to boot your PC you won’t be able to boot your operating system instead you will be faced with the Error 1962 No Operating System Found message and you won’t have any option but to restart your PC which will again land you on the same error message screen.
Erro 1962: Nenhum sistema operacional encontrado. A sequência de inicialização será repetida automaticamente.
The strange thing with the error 1962 is that user might be able to successfully boot to Windows after waiting for few hours but that might not be the case with everyone. So you can check if you can access your system after waiting for few hours. Whereas some affected users can’t even get into BIOS setup as the Error 1962 No Operating System Found message is displayed immediately after the computer boots up.
Well, now you know enough about error 1962 let’s see how to actually fix this error. The good thing about this error it can also be caused simply because of faulty SATA cable which connects your Hard disk to the motherboard. So you need to perform various checks in order to determine the cause of Error 1962 No Operating System Found message on boot. Without wasting any time let’s see how to actually fix this issue with the below-listed troubleshooting methods.
Erro 1962: Nenhum sistema operacional encontrado [RESOLVIDO]
Before trying any advanced steps we need to check whether it’s a case of faulty Hard disk or the SATA cable. In order to check if the hard disk is working or not, connect it to another computer and verify if you’re able to access it, if you’re able to then it’s not the case of the faulty Hard disk. But if you’re still not able to access the hard disk on another PC then you need to replace your Hard disk.
Now check if the SATA cable is at fault, just use another PC cable in order to check if the cable is faulty. If this is the case then simply buying another SATA cable might fix the issue for you. Now that you have verified if it’s not the case of faulty HDD or SATA cable then you can continue to the below-listed steps.
Observação: In order to try below fixes you need to use Windows Installation or Recovery disc, so make sure you are ready with any one of them before hand.
Method 1: Run Automatic/Startup Repair
1.Insira o DVD de instalação inicializável do Windows 10 e reinicie o PC.
2.Quando solicitado a pressionar qualquer tecla para inicializar a partir do CD ou DVD, pressione qualquer tecla para continuar.
3.Selecione suas preferências de idioma e clique em Avançar. Clique em Reparar seu computador no canto inferior esquerdo.
4.Na tela de escolha de uma opção, clique em Resolução de problemas.
5.Na tela Solução de problemas, clique em Opção avançada.
6.Na tela de opções avançadas, clique em Reparo Automático ou Reparo de Inicialização.
7.Espere até o Reparos automáticos/de inicialização do Windows completa.
8.Reinicie e você conseguiu Fix Error 1962 No Operating System Found.
Leia também: Como consertar o Reparo Automático não conseguiu reparar o seu PC.
Method 2: Run Diagnostic Test
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Para executar o Diagnóstico, reinicie o seu PC e quando o computador iniciar (antes da tela de inicialização), pressione a tecla F12 e quando o menu de inicialização aparecer, destaque a opção Inicializar na partição do utilitário ou a opção Diagnóstico e pressione Enter para iniciar o Diagnóstico. Isso verificará automaticamente todo o hardware do seu sistema e reportará se algum problema for encontrado.
Method 3: Set correct boot order
Você pode estar vendo o “Error 1962 No Operating System Found” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Quando o computador iniciar (antes da tela de inicialização ou da tela de erro), pressione repetidamente Delete ou a tecla F1 ou F2 (dependendo do fabricante do seu computador) para entre na configuração do BIOS.
2.Quando estiver na configuração do BIOS, selecione a guia Boot na lista de opções.
3.Now make sure that the computer Hard disk or SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Once above changes are done move to the Startup tab and make the following changes:
Primary Boot Sequence
CSM: [Enable]
Boot Mode: [Auto]
Boot Priority: [UEFI First]
Quick Boot: [Enable]
Boot up Num-lock Status: [On]
5.Pressione F10 para salvar e sair das alterações na configuração do BIOS.
Method 4: Enable UEFI Boot
Most UEFI firmware (Unified Extensible firmware Interface) either contains bugs or are misleading. This is because of the frequent evolution of the firmware which has made UEFI too complicated. The Error 1962 No Operating System Found seems to be caused by UEFI firmware and when you reset or set the default value of UEFI it seems to fix the issue.
You have to configure CSM (Compatibility Support Module) to enable if you want to boot to a legacy Operating System (OS). If you have recently upgraded your Windows installation then this setting is disabled by default which disables the support for the older Operating System’s which in turn won’t let you boot to OS. Now be careful to set the UEFI as the first or only boot method (which is already the default value).
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Go to the Startup tab and make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 5: Restore your PC using Recovery Disc
1.Coloque a mídia de instalação do Windows ou a unidade de recuperação/disco de reparo do sistema e selecione seu lpreferências de idiomae clique em Avançar
2.Clique reparação seu computador na parte inferior.
3. Agora escolha Resolução de problemas e depois Opções avançadas.
4..Finalmente, clique em “A restauração do sistema”E siga as instruções na tela para concluir a restauração.
5.Restart your PC and this step may have Fix Error 1962 No Operating System Found.
Método 6: Reparar a instalação do Windows 10
Se nenhuma das soluções acima funcionar para você, você pode ter certeza de que seu HDD está bom, mas você pode estar vendo o erro “Error 1962 No Operating System Found”Porque o sistema operacional ou as informações do BCD no HDD foram apagadas de alguma forma. Bem, neste caso, você pode tentar reparar a instalação do Windows, mas se isso também falhar, a única solução que resta é instalar uma nova cópia do Windows (instalação limpa).
Recomendado para você:
É isso que você conseguiu com sucesso Fix Error 1962: No Operating System Found mas se você ainda tiver alguma dúvida sobre este guia, sinta-se à vontade para perguntar na seção de comentários.