Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reinicialize e selecione o dispositivo de inicialização adequado
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Problema de reinicialização e seleção do dispositivo de inicialização adequado [RESOLVIDO]
Método 1: definir a ordem de inicialização correta
Você pode estar vendo o erro “Reinicialize e selecione o dispositivo de inicialização adequado”Porque a ordem de inicialização não está definida corretamente, o que significa que o computador está tentando inicializar a partir de outra fonte que não possui um sistema operacional e, portanto, não consegue. Para corrigir esse problema, você precisa definir o disco rígido como prioridade máxima na ordem de inicialização. Vamos ver como definir a ordem de inicialização adequada:
1.Quando o computador iniciar (antes da tela de inicialização ou da tela de erro), pressione repetidamente Delete ou a tecla F1 ou F2 (dependendo do fabricante do seu computador) para entre na configuração do BIOS.
2.Quando estiver na configuração do BIOS, selecione a guia Boot na lista de opções.
3.Agora certifique-se de que o computador Disco rígido ou SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, se não, continue.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Para executar o Diagnóstico, reinicie o seu PC e quando o computador iniciar (antes da tela de inicialização), pressione a tecla F12 e quando o menu de inicialização aparecer, destaque a opção Inicializar na partição do utilitário ou a opção Diagnóstico e pressione Enter para iniciar o Diagnóstico. Isso verificará automaticamente todo o hardware do seu sistema e reportará se algum problema for encontrado.
Recomendado: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Importante: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Insira o DVD de instalação inicializável do Windows 10 e reinicie o PC.
2.Quando solicitado a pressionar qualquer tecla para inicializar a partir do CD ou DVD, pressione qualquer tecla para continuar.
3.Selecione suas preferências de idioma e clique em Avançar. Clique em Reparar seu computador no canto inferior esquerdo.
4.Na tela de escolha de uma opção, clique em Solucionar problemas.
5.Na tela Solução de problemas, clique na opção Avançado.
6.Na tela de opções avançadas, clique em Reparo Automático ou Reparo de Inicialização.
7.Aguarde até que os reparos automáticos/de inicialização do Windows sejam concluídos.
8.Reinicie e você conseguiu Fix Reboot and Select Proper Boot Device issue, se não, continue.
Além disso, leia Como consertar o Reparo Automático que não conseguiu reparar seu PC.
Método 5: habilitar inicialização UEFI
1.Reinicie o seu PC e toque em F2 ou DEL dependendo do seu PC para abrir a configuração de inicialização.
2.The make the following changes:
Alterar a opção Lista de inicialização para UEFI Desativar opção de carregamento herdado ROM Ativar inicialização segura
3. Em seguida, toque em F10 para salvar e sair da configuração de inicialização.
Método 6: alterar a partição ativa no Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Observação: Sempre marque a partição reservada do sistema (geralmente 100 MB) como ativa e se você não tiver uma partição reservada do sistema, marque C: Drive como a partição ativa.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Método 7: Reparar a instalação do Windows 10
Se nenhuma das soluções acima funcionar para você, você pode ter certeza de que seu HDD está bom, mas você pode estar vendo o erro “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key”Porque o sistema operacional ou as informações do BCD no HDD foram apagadas de alguma forma. Bem, neste caso, você pode tentar reparar a instalação do Windows, mas se isso também falhar, a única solução que resta é instalar uma nova cópia do Windows (instalação limpa).
É isso que você conseguiu com sucesso Fixar Reboot and Select proper Boot device issue mas se você ainda tiver alguma dúvida sobre esta postagem, sinta-se à vontade para perguntar na seção de comentários.