Fix Driver Power State Failure in Windows 10: Driver Power State Failure Error (0x0000009F) mostly occur due to outdated or incompatible drivers for the hardware devices of your PC. Eroare de stare a puterii șoferului is an error which is displayed on Blue Screen of Death(BSOD), which doesn’t mean that your computer can’t be repaired, it just means that the PC has encountered something that it didn’t know what to do.
And the biggest problem you encounter is that you can’t log on to the Windows, because every time you restart your PC you will be shown Driver Power State Failure Error ( DRIVER_POWER_STATE_FAILURE Error ), hence you are stuck in an endless loop. However, this error is totally fixable if you will follow this article as shown below.
NOTĂ: Most of the users who encounter this issue have put their computer to sleep and when they try to wake up their PC they encounter this error.
The most common driver which cause this error are antivirus software’s, so try to disable them and try to reboot your Windows. Always update your BIOS!
Remediați eșecul stării de alimentare a driverului în Windows 10
Before going any further let’s discuss how to Enable Legacy Advanced Boot Menu so that you can easily get into Safe Mode:
1. Reporniți Windows 10.
2.As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3.Inserați DVD-ul de instalare bootabil Windows 10 și reporniți computerul.
4. Când vi se solicită să apăsați orice tastă pentru a porni de pe CD sau DVD, apăsați orice tastă pentru a continua.
5.Selectați preferințele de limbă, și faceți clic pe Următorul. Faceți clic pe Reparare computerul dvs. din stânga jos.
6.La alegerea unui ecran de opțiuni, faceți clic Depanarea.
7. Pe ecranul Depanare, faceți clic pe Optiuni avansate.
8.On Advanced options screen, click Command Prompt.
9.When the Command Prompt(CMD) open type C: și apăsați Enter.
10.Now type the following command:
BCDEDIT / SET {DEFAULT} LEGATURA DE BOOTMENUPOLICY
11.And hit enter to Enable Legacy Advanced Boot Menu.
12.Close Command Prompt and back on the Choose an option screen, click continue to restart Windows 10.
13.Finally, don’t forget to eject your Windows 10 installation DVD, in order to boot into mod sigur.
Method 1: Uninstall Problematic Driver
1. As the computer restarts, press F8 to display the Opțiuni avansate de încărcare și selectați Mod sigur.
2.Hit Enter to start Windows 10 in Safe Mode.
3.Press Windows Key + R and type “devmgmt.msc” then hit enter to open Device Manager.
4.Now inside Device Manager, you must see the problematic device driver (it has a yellow mark next to it).
Also, see Fix This device cannot start (Code 10)
5.Once the problematic device driver is identified, right click and select Dezinstalare.
6.When asked for confirmation, click Ok.
7.Once the driver is uninstalled restart Windows 10 normally.
Method 2: Check Windows Minidump file
1.Let’s first make sure that minidumps are enabled.
2.Press Windows Key + R and type “sysdm.cpl” then press enter.
3.Go to advanced tab and click on the Settings button in Pornire și recuperare.
4.Ensure that Reporniți automat under System failure is unchecked.
5.Under the Write Debugging Information header, select Small memory dump (256 kB) in the drop-down box.
6.Make sure that the Small Dump Directory este listat ca %systemroot%Minidump.
7.Click OK and restart your PC to apply the changes.
8.Now install this program called Cine s-a prăbușit.
9. Aleargă Cine s-a prăbușit and click on Analyze.
10..Scroll down to view the report and check for the problematic driver.
11.Finally, update the driver and Reboot to apply your changes.
12.Now Press Tasta Windows + R și tastați „msinfo32” apoi apăsați enter.
13. În Rezumatul sistemului make sure all your drivers are up to date.
14.Make sure your BIOS-ul is also updated, else update it.
15.Select Mediul software apoi faceți clic pe Running Tasks.
16.Again make sure the drivers have updated i.e. no drivers have file dated back to 2 years.
17.Reboot your PC and this would Remediați eșecul stării de alimentare a driverului în Windows 10 dar dacă nu, atunci continuă.
Method 3: Run System File Check (SFC)
1.In the safe mode, Right click on Start and select Command Prompt(Admin) to open cmd.
2. Tastați următoarea comandă în cmd: /scaneaza acum
3.Let system file check run, usually, it takes 5 to 15 minutes.
Notă: Sometimes you have to run SFC command 3-4 times to fix the problem.
4.After the process is finished and you receive the following message:
Windows Resource Protection a găsit fișiere corupte și le-a reparat cu succes. Detaliile sunt incluse în CBS.Log %WinDir%LogsCBSCBS.log.
5.Simply restart your PC and see if the problem is resolved or not.
6.If you receive the following message:
Windows Resource Protection a găsit fișiere corupte, dar nu a reușit să remedieze unele dintre ele. Detaliile sunt incluse în CBS.Log %WinDir%LogsCBSCBS.log.
7.Then you have to manually repair corrupted files, to do this first view details of the SFC process.
8.At the command prompt, type the following command, and then press ENTER:
findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt"
9. Deschideți Sfcdetails.txt file from your desktop.
10.The Sfcdetails.txt file uses the following format: Date/Time SFC detail
11.The following sample log file contains an entry for a file that could not be repaired:
2014-02-17 02:40:22, CSI 000001aa [SR] Cannot repair member file [l:22{11}]"autochk.exe" of Microsoft-Windows-Autochk, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
12.Now type the following command in the cmd:
DISM.exe /Online /Cleanup-image /Scanhealth && DISM.exe /Online /Cleanup-image /Restorehealth
This will run DSIM(Deployment Image Servicing and Management) restore commands and will fix SFC errors.
13.After running DISM it is a good idea to re-run SFC /scannow to make sure all the issues were fixed.
14.If for some reason DISM command is not working try this SFCFix Tool.
15.Restart your PC and see if you’re able to Fix Driver Power State Failure in Windows 10.
Method 4: Restore you PC to earlier time
1. Apăsați tasta Windows + R și tastați”sysdm.cpl” apoi apăsați enter.
2.Select Protecția sistemului filă și alegeți Restaurarea sistemului.
3. Faceți clic pe Următorul și alegeți cel dorit Punct de restaurare a sistemului.
4.Follow on screen instruction to complete system restore.
5.After reboot, you must have fixed the Driver Power State Failure.
Recomandat pentru tine:
Asta ai cu succes Remediați eșecul stării de alimentare a driverului în Windows 10 if you still have any question regarding this post feel free to ask them in comments.